[ITT Cannon]Electronic/Electrical Parts and Controll Equipments
Filters
- by Product group
- by Product
Sort by:
-
ITT Cannon Sure Seal Series Cable Mount Connector, 3 contacts Plug 120-8552-001
Contacts must be ordered separately see stock numbers: ; 167-9499 167-9499 male or ; 167-9506 167-9506 female. For the necessary tooling see stock number ; 167-9534 167-9534 typical.. Sureseal Cable Plugs
1 products found
JPY: 8,680
USD: 54.41
-
ITT Cannon Sure Seal Series Cable Mount Connector, 4 contacts Plug 120-8552-002
Contacts must be ordered separately see stock numbers: ; 167-9499 167-9499 male or ; 167-9506 167-9506 female. For the necessary tooling see stock number ; 167-9534 167-9534 typical.. Sureseal Cable Plugs
1 products found
JPY: 10,000
USD: 62.68
-
ITT Cannon Male Crimp Circular Connector Contact for use with SURE-SEAL Connectors, Wire size 20 → 16 AWG 330-8672-001
Contacts must be ordered separately. Sureseal and Mini Sureseal Contacts. The insertion tool is required to push the crimped contacts into the plugs and receptacles The guide tool is only required for the Sure-Seal range; being used to aid the insertion of the female contacts For details of tooling, please see cross reference panel The crimp tool is compatible for both Sure-Seal and Mini Sure-Seal contacts
1 products found
JPY: 2,000
USD: 12.54
-
ITT Cannon Sure Seal Series, Insertion Tool 121086-3025
Contacts must be ordered separately. Sureseal and Mini Sureseal Tooling. Tooling for the crimping and insertion of Sure-Seal and Mini Sure-Seal contacts The insertion tool is required to push the crimped contacts into the plugs and receptacles The guide pin is only required for the Sure-Seal range, being used to aid the insertion of the female contacts The crimp tool is compatible for both Sure-Seal and Mini Sure-Seal contacts
1 products found
JPY: 97,300
USD: 609.92
-
ITT Cannon Cable Boot, 16.51mm 317-1398-000
Contacts must be ordered separately. Sureseal Cable Boots. Seals wired cable jackets to the connector housing Provides abrasion resistance
1 products found
JPY: 14,900
USD: 93.40
-
ITT Cannon Dust Cap 192900-0378
Dust cap
Plastic dust cap for plug and socket panel housing.1 products found
JPY: 1,660
USD: 10.41
-
ITT Cannon Neptune Circular Series Panel Mount Housing, 12 contacts Socket 192900-0308
Panel Plug and Socket Shells. Panel plugs and sockets feature the same rear sealing arrangement. Again, the retaining ring may be discarded in favour of a backshell if required.
1 products found
JPY: 5,710
USD: 35.79
-
ITT Cannon DL Series, 60 Way Heavy Duty Power Connector Socket 086-0032-000
High Density Connector. Brought to you by ITT Cannon, this DL series of high density connectors are zero insertion force (ZIF). The DL series connectors will mate and lock together using the appropriate actuating handle fitted to the cam shaft in the plug body. This makes them ideal for quick and durable mating in multi-wire power and signal applications where high performance is a must. Features and Benefits: Polarising key ensures correct orientation Any number of contacts can be loaded into individual cavities, up to the maximum stated Moulded alpha numeric cavity grid reference Panel mounting holes accept back shells and polarising pillars
1 products found
JPY: 4,030
USD: 25.26
-
ITT Cannon DLM Series, 260 Way Plug Body Plug DLM5-260P
Metal Connector Shell. The DLM range of metal plug and socket shells use a rugged nickel plated aluminium housing The shield locking mechanism feature ensures uniform mating pressure around the perimeter of the mated connector to create an EMI/RFI shield All metal DLM series are inter-connectable with the plastic version and also use the same contacts enabling full compatibility
1 products found
JPY: 78,500
USD: 492.07
-
ITT Cannon DLM Series, 260 Way Socket Body Socket DLM5-260R
Metal Connector Shell. The DLM range of metal plug and socket shells use a rugged nickel plated aluminium housing The shield locking mechanism feature ensures uniform mating pressure around the perimeter of the mated connector to create an EMI/RFI shield All metal DLM series are inter-connectable with the plastic version and also use the same contacts enabling full compatibility
1 products found
JPY: 32,000
USD: 200.59
-
ITT Cannon ZIF Series, Corner Polarization Kit for use with ZIF Connector 772031
Kit D is not suitable for use with metal hoods Stock No.'s ; 341-9019 341-9019 , ; 341-9025 341-9025 ; ; 341-9003 341-9003. Corner Polarisation Kit. Stepped posts which mount in the corners of plug/socket bodies so that connectors of similar size only mate with set polarised configurations Kit D; for 60, 96, 156 and 360-way bodies Kit E; for 260-way bodies Kits consists of 4 posts with mounting screws
1 products found
JPY: 4,500
USD: 28.21
-
ITT Cannon MS Series, Male Crimp Circular Connector Contact for use with ZIF Connectors, Wire size 26 → 24 AWG 030-2410-003
These connectors are Non-Gendered. Standard and Low Current Contacts. This range of Cannon DL Crimp Contacts are available with both 20μ inch and 50μ inch Gold Plating. The 20μ inch Gold Plated beryllium-copper hermaphrodite contacts are used for applications requiring over 100 milliamps to 5 amps and are physically the same and will mate with each other and can be used in both plug and socket bodies, see stock number ; 484-8676 484-8676 for 20-22 AWG and ; 484-8698 484-8698 for 24-26 AWG. The 50μ inch Gold Plated beryllium-copper contacts are used for applications requiring microamps to 5 amps (low current) and are physically slightly different with the Plug contact having a Bump and the Receptacle contact being Flat: ; 295-3603 295-3603
1 products found
JPY: 2,180
USD: 13.67
-
ITT Cannon DL Series, Male Crimp Circular Connector Contact for use with ZIF Connectors, Wire size 22 → 20 AWG 030-2491-001
These connectors are Non-Gendered. Standard and Low Current Contacts. This range of Cannon DL Crimp Contacts are available with both 20μ inch and 50μ inch Gold Plating. The 20μ inch Gold Plated beryllium-copper hermaphrodite contacts are used for applications requiring over 100 milliamps to 5 amps and are physically the same and will mate with each other and can be used in both plug and socket bodies, see stock number ; 484-8676 484-8676 for 20-22 AWG and ; 484-8698 484-8698 for 24-26 AWG. The 50μ inch Gold Plated beryllium-copper contacts are used for applications requiring microamps to 5 amps (low current) and are physically slightly different with the Plug contact having a Bump and the Receptacle contact being Flat: ; 295-3603 295-3603
1 products found
JPY: 1,810
USD: 11.35
-
ITT Cannon T3P Series, 13A Male Solder Circular Connector Contact, Wire size 16 AWG 192900-0633
Solder Cup Contact. Suitable for 500 mating cycles
1 products found
JPY: 2,590
USD: 16.24
-
ITT Cannon size 7 Male Crimp Circular Connector Contact 330-8672-100
Contacts must be ordered separately. Sureseal and Mini Sureseal Contacts. The insertion tool is required to push the crimped contacts into the plugs and receptacles The guide tool is only required for the Sure-Seal range; being used to aid the insertion of the female contacts For details of tooling, please see cross reference panel The crimp tool is compatible for both Sure-Seal and Mini Sure-Seal contacts
1 products found
JPY: 3,560
USD: 22.32
-
ITT Cannon KPTC Series, size 7 Female Crimp Circular Connector Contact for use with Mini SUPER-SEAL Connectors, Wire 031-8703-100
Contacts must be ordered separately. Sureseal and Mini Sureseal Contacts. The insertion tool is required to push the crimped contacts into the plugs and receptacles The guide tool is only required for the Sure-Seal range; being used to aid the insertion of the female contacts For details of tooling, please see cross reference panel The crimp tool is compatible for both Sure-Seal and Mini Sure-Seal contacts
1 products found
JPY: 4,190
USD: 26.27
-
ITT Cannon DLM Series, 96 Way Plug Body Plug 127050-0212
Metal Connector Shell. The DLM range of metal plug and socket shells use a rugged nickel plated aluminium housing The shield locking mechanism feature ensures uniform mating pressure around the perimeter of the mated connector to create an EMI/RFI shield All metal DLM series are inter-connectable with the plastic version and also use the same contacts enabling full compatibility
1 products found
JPY: 40,100
USD: 251.36
-
ITT Cannon DLM Series, 156 Way Plug Body Plug DLM1-156P
Metal Connector Shell. The DLM range of metal plug and socket shells use a rugged nickel plated aluminium housing The shield locking mechanism feature ensures uniform mating pressure around the perimeter of the mated connector to create an EMI/RFI shield All metal DLM series are inter-connectable with the plastic version and also use the same contacts enabling full compatibility
1 products found
JPY: 50,500
USD: 316.56
-
ITT Cannon DL, DLM Series Metal, Polymer Right Angle D-sub Connector Backshell, 96 Way, Strain Relief 249-4517-000
Plastic and Metal Hoods. Back shells are supplied with cable strain relief clamps and fit both plug or socket bodies Thermoplastic hoods provide a cost effective solution. Nickel plated aluminium die-castings are ideal for shielding The strain relief clamps can be mounted to give either straight or 90° cable entry.
1 products found
JPY: 22,700
USD: 142.29
-
ITT Cannon DL Series, 156 Way Backshell DL1/DLM1
Plastic and Metal Hoods. Back shells are supplied with cable strain relief clamps and fit both plug or socket bodies Thermoplastic hoods provide a cost effective solution. Nickel plated aluminium die-castings are ideal for shielding The strain relief clamps can be mounted to give either straight or 90° cable entry.
1 products found
JPY: 29,800
USD: 186.80
-
ITT Cannon ZD* Series Panel Mount, 25 Pin D-sub Connector Plug, Shell Size B ZDB25P
ITT ZD Connectors. Stamped and formed contacts Solder bucket terminals ''Closed entry'' technology, guaranteeing secure and reliable connections. The performance of these connectors makes them particularly suitable for industrial applications, information technology, telecommunications, medical apparatus etc
1 products found
JPY: 4,770
USD: 29.90
-
ITT Cannon TNA Series, Size 14 Straight Backshell With Strain Relief, For Use With Neptune Circular Connector, TNM 192900-0286
Backshell Accessories. Backshells providing additional protection. Sealed version has integral sealing gland and clamping mechanism. Unsealed version has strain relief clamp.
1 products found
JPY: 1,830
USD: 11.47
-
ITT Cannon MS Series, size 20 5A Male Crimp Circular Connector Contact for use with ZIF Connectors, Wire size 20 030-2409-001
These connectors are Non-Gendered. Standard and Low Current Contacts. This range of Cannon DL Crimp Contacts are available with both 20μ inch and 50μ inch Gold Plating. The 20μ inch Gold Plated beryllium-copper hermaphrodite contacts are used for applications requiring over 100 milliamps to 5 amps and are physically the same and will mate with each other and can be used in both plug and socket bodies, see stock number ; 484-8676 484-8676 for 20-22 AWG and ; 484-8698 484-8698 for 24-26 AWG. The 50μ inch Gold Plated beryllium-copper contacts are used for applications requiring microamps to 5 amps (low current) and are physically slightly different with the Plug contact having a Bump and the Receptacle contact being Flat: ; 295-3603 295-3603
1 products found
JPY: 1,570
USD: 9.84
-
ITT Cannon DL Series, Male Crimp Circular Connector Contact for use with ZIF Connectors, Wire size 24 → 26 AWG 030-2410-001
These connectors are Non-Gendered. Standard and Low Current Contacts. This range of Cannon DL Crimp Contacts are available with both 20μ inch and 50μ inch Gold Plating. The 20μ inch Gold Plated beryllium-copper hermaphrodite contacts are used for applications requiring over 100 milliamps to 5 amps and are physically the same and will mate with each other and can be used in both plug and socket bodies, see stock number ; 484-8676 484-8676 for 20-22 AWG and ; 484-8698 484-8698 for 24-26 AWG. The 50μ inch Gold Plated beryllium-copper contacts are used for applications requiring microamps to 5 amps (low current) and are physically slightly different with the Plug contact having a Bump and the Receptacle contact being Flat: ; 295-3603 295-3603
1 products found
JPY: 1,460
USD: 9.15
-
ITT Cannon ZD*A Series Panel Mount, 15 Pin D-sub Connector Socket, Shell Size E High Density ZDEA-15S
ITT Cannon ZD*A Series High Density D-Sub Connectors with Solder Cup Terminals. ZD*A Series high density D-Sub plug and socket connectors with solder cup terminals. These ZD*A HD d-subminiature connectors have a tin plated steel shell, black glass filled thermoplastic UL 94V-0 insulator and size 22D gold plated brass stamped and formed contacts that are intermateable with industry standard d-subminiature connectors. Typical applications for these ZD*A series high density d-sub plug and socket connectors include communication and information systems.
1 products found
JPY: 1,430
USD: 8.96
-
ITT Cannon APD Series, 4 Pole Din Plug Plug, DIN 72585, 48 V dc IP67, IP69K 121583-0000
Socket contacts: ; 752-5679 752-5679 , ; 752-5672 752-5672 , EndBells link: ; 752-5688 752-5688 , ; 752-5691 752-5691 , ; 752-5682 752-5682 , ; 752-5694 752-5694 , wire seals: ; 752-5698 752-5698 , ; 752-5708 752-5708 , Wire filler: ; 752-5701 752-5701 , crimp tool: ; 752-5705 752-5705. ITT Cannon Connectors APD Series Plug Connectors 4 Way. ITT Cannon connectors APD series plug connectors 4 Way are suitable for connector applications such as sensor and traction/brake control systems, lighting systems and other automotive connector uses. The APD series plugs small form and high power handling make them ideal for many applications. Durable hard wearing connectors derived from ISO 15170.
1 products found
JPY: 1,690
USD: 10.59
-
ITT Cannon APD Series Panel Mount Connector, 4 contacts Socket 121583-0004
DIN EN 60529, ISO 15170-2 sec.6.2,6.3,6.4,6.6. Pins contacts:752-5676 , 752-5685 EndBells link: 752-5688 , 752-5691, 752-5682 , 752-5694 wire seals: 752-5698 , 752-5708 , Wire filler RS 752-5701, Gasket RS 752-5562 crimp tool 752-5705. ITT Cannon Connectors APD Series Flange Receptacles 4 Way. ITT cannon connectors APD series flange receptacle connectors 4 Way are suitable for connector applications such as sensor and traction/brake control systems, lighting systems and other automotive connector uses. The APD series receptacle connectors small form and high power handling make them ideal for many applications. Durable hard wearing connectors derived from ISO 15170. Operating voltage 48VDC Contact resistance 5mΩ max Voltage proof 1000Vac (60 secs) Insulation resistance 10Ω min.
1 products found
JPY: 1,200
USD: 7.52
-
121 Series Connector Seal Wire Seal diameter 5.7mm for use with APD Series 121668-0032
For associated connectors see: ; 752-5635 752-5635 , ; 752-5638 752-5638 , ; 752-5632 752-5632 , ; 752-5641 752-5641 , ; 752-5644 752-5644 , ; 752-5648 752-5648 , ; 752-5657 752-5657 , ; 752-5650 752-5650 , ; 752-5610 752-5610 , ; 752-5629 752-5629 , ; 752-5622 752-5622 , ; 752-5626 752-5626. ITT Cannon Connectors APD Series Wire Seals for 4 Way. ITT Cannon APD series individual wire seal for high power 4 way connectors, available in a variety of colours and sizes. These wire seals offers individual wire sealing to cables assembled within the APD series 4 way connectors.
1 products found
JPY: 310
USD: 1.94
-
ITT Cannon MDM Series Panel Mount, 9 Pin D-sub Connector Plug Micro-D MDM-9PSB-A174
For suitable jackscrews see stock number ; 770-7941 770-7941 , ; 770-7944 770-7944 and ; 770-7953 770-7953 typically. ITT 1.27mm Micro-D Connectors - MDM Series. MDM series moisture sealed Micro-D connectors with a lightweight, rugged design and high density contact configurations on a 1.27mm pitch. These MDM microminiature D connectors have electroless nickel plated aluminium shells for added strength and EMI and RFI shielding along with silicone elastomer compression interfacial seals that provide protection against moisture and humidity between each contact and contacts and shell. The contacts of these MDM Micro-D connectors are size 24 MICROPIN™ or MICROSOCKET™ contacts which are made from copper alloy with a gold plating. These Micro-D connectors have 2.31mm mounting holes and are available with various termination options: Part numbers: MDM-xxxSB-xxx have solder pot terminations that accept 26AWG max harness wire. Part numbers: MDM-xxxH003B-xxx have harness wire terminations (18", 7 strand 26AWG to MIL-W-16878/4, Type E Teflon, colour coded to MIL-STD-681 system I). Part numbers: MDM-xxxL1B-xxx have 0.5" uninsulated solid 25AWG gold plated copper wire terminations.
1 products found
JPY: 27,900
USD: 174.89
-
ITT Cannon MDM Series Panel Mount, 9 Pin D-sub Connector Socket Micro-D MDM-9SSB-A174
For suitable jackscrews see stock number ; 770-7941 770-7941 , ; 770-7944 770-7944 and ; 770-7953 770-7953 typically. ITT 1.27mm Micro-D Connectors - MDM Series. MDM series moisture sealed Micro-D connectors with a lightweight, rugged design and high density contact configurations on a 1.27mm pitch. These MDM microminiature D connectors have electroless nickel plated aluminium shells for added strength and EMI and RFI shielding along with silicone elastomer compression interfacial seals that provide protection against moisture and humidity between each contact and contacts and shell. The contacts of these MDM Micro-D connectors are size 24 MICROPIN™ or MICROSOCKET™ contacts which are made from copper alloy with a gold plating. These Micro-D connectors have 2.31mm mounting holes and are available with various termination options: Part numbers: MDM-xxxSB-xxx have solder pot terminations that accept 26AWG max harness wire. Part numbers: MDM-xxxH003B-xxx have harness wire terminations (18", 7 strand 26AWG to MIL-W-16878/4, Type E Teflon, colour coded to MIL-STD-681 system I). Part numbers: MDM-xxxL1B-xxx have 0.5" uninsulated solid 25AWG gold plated copper wire terminations.
1 products found
JPY: 36,700
USD: 230.05
-
ITT Cannon MDM Series Panel Mount, 25 Pin D-sub Connector Plug Micro-D MDM-25PSB-A174
For suitable jackscrews see stock number ; 770-7941 770-7941 , ; 770-7944 770-7944 and ; 770-7953 770-7953 typically. ITT 1.27mm Micro-D Connectors - MDM Series. MDM series moisture sealed Micro-D connectors with a lightweight, rugged design and high density contact configurations on a 1.27mm pitch. These MDM microminiature D connectors have electroless nickel plated aluminium shells for added strength and EMI and RFI shielding along with silicone elastomer compression interfacial seals that provide protection against moisture and humidity between each contact and contacts and shell. The contacts of these MDM Micro-D connectors are size 24 MICROPIN™ or MICROSOCKET™ contacts which are made from copper alloy with a gold plating. These Micro-D connectors have 2.31mm mounting holes and are available with various termination options: Part numbers: MDM-xxxSB-xxx have solder pot terminations that accept 26AWG max harness wire. Part numbers: MDM-xxxH003B-xxx have harness wire terminations (18", 7 strand 26AWG to MIL-W-16878/4, Type E Teflon, colour coded to MIL-STD-681 system I). Part numbers: MDM-xxxL1B-xxx have 0.5" uninsulated solid 25AWG gold plated copper wire terminations.
1 products found
JPY: 53,700
USD: 336.61
-
ITT Cannon MDM Series Panel Mount, 25 Pin D-sub Connector Socket Micro-D MDM-25SSB-A174
For suitable jackscrews see stock number ; 770-7941 770-7941 , ; 770-7944 770-7944 and ; 770-7953 770-7953 typically. ITT 1.27mm Micro-D Connectors - MDM Series. MDM series moisture sealed Micro-D connectors with a lightweight, rugged design and high density contact configurations on a 1.27mm pitch. These MDM microminiature D connectors have electroless nickel plated aluminium shells for added strength and EMI and RFI shielding along with silicone elastomer compression interfacial seals that provide protection against moisture and humidity between each contact and contacts and shell. The contacts of these MDM Micro-D connectors are size 24 MICROPIN™ or MICROSOCKET™ contacts which are made from copper alloy with a gold plating. These Micro-D connectors have 2.31mm mounting holes and are available with various termination options: Part numbers: MDM-xxxSB-xxx have solder pot terminations that accept 26AWG max harness wire. Part numbers: MDM-xxxH003B-xxx have harness wire terminations (18", 7 strand 26AWG to MIL-W-16878/4, Type E Teflon, colour coded to MIL-STD-681 system I). Part numbers: MDM-xxxL1B-xxx have 0.5" uninsulated solid 25AWG gold plated copper wire terminations.
1 products found
JPY: 58,100
USD: 364.20
-
ITT Cannon MDM Series Panel Mount, 15 Pin D-sub Connector Socket Micro-D MDM-15SSB-A174
For suitable jackscrews see stock number ; 770-7941 770-7941 , ; 770-7944 770-7944 and ; 770-7953 770-7953 typically. ITT 1.27mm Micro-D Connectors - MDM Series. MDM series moisture sealed Micro-D connectors with a lightweight, rugged design and high density contact configurations on a 1.27mm pitch. These MDM microminiature D connectors have electroless nickel plated aluminium shells for added strength and EMI and RFI shielding along with silicone elastomer compression interfacial seals that provide protection against moisture and humidity between each contact and contacts and shell. The contacts of these MDM Micro-D connectors are size 24 MICROPIN™ or MICROSOCKET™ contacts which are made from copper alloy with a gold plating. These Micro-D connectors have 2.31mm mounting holes and are available with various termination options: Part numbers: MDM-xxxSB-xxx have solder pot terminations that accept 26AWG max harness wire. Part numbers: MDM-xxxH003B-xxx have harness wire terminations (18", 7 strand 26AWG to MIL-W-16878/4, Type E Teflon, colour coded to MIL-STD-681 system I). Part numbers: MDM-xxxL1B-xxx have 0.5" uninsulated solid 25AWG gold plated copper wire terminations.
1 products found
JPY: 40,100
USD: 251.36
-
ITT Cannon MDM Series 1.27mm Pitch 9 Way Straight Micro-D Connector, Socket, Aluminium Alloy Shell, 457.2mm Lead MDM-9SH003B-A174
For suitable jackscrews see stock number ; 770-7941 770-7941 , ; 770-7944 770-7944 and ; 770-7953 770-7953 typically. ITT 1.27mm Micro-D Connectors - MDM Series. MDM series moisture sealed Micro-D connectors with a lightweight, rugged design and high density contact configurations on a 1.27mm pitch. These MDM microminiature D connectors have electroless nickel plated aluminium shells for added strength and EMI and RFI shielding along with silicone elastomer compression interfacial seals that provide protection against moisture and humidity between each contact and contacts and shell. The contacts of these MDM Micro-D connectors are size 24 MICROPIN™ or MICROSOCKET™ contacts which are made from copper alloy with a gold plating. These Micro-D connectors have 2.31mm mounting holes and are available with various termination options: Part numbers: MDM-xxxSB-xxx have solder pot terminations that accept 26AWG max harness wire. Part numbers: MDM-xxxH003B-xxx have harness wire terminations (18", 7 strand 26AWG to MIL-W-16878/4, Type E Teflon, colour coded to MIL-STD-681 system I). Part numbers: MDM-xxxL1B-xxx have 0.5" uninsulated solid 25AWG gold plated copper wire terminations.
1 products found
JPY: 31,900
USD: 199.96
-
ITT Cannon MDM Series 1.27mm Pitch 25 Way Straight Micro-D Connector, Socket, Aluminium Alloy Shell, 457.2mm Lead MDM-25SH003B-A174
For suitable jackscrews see stock number ; 770-7941 770-7941 , ; 770-7944 770-7944 and ; 770-7953 770-7953 typically. ITT 1.27mm Micro-D Connectors - MDM Series. MDM series moisture sealed Micro-D connectors with a lightweight, rugged design and high density contact configurations on a 1.27mm pitch. These MDM microminiature D connectors have electroless nickel plated aluminium shells for added strength and EMI and RFI shielding along with silicone elastomer compression interfacial seals that provide protection against moisture and humidity between each contact and contacts and shell. The contacts of these MDM Micro-D connectors are size 24 MICROPIN™ or MICROSOCKET™ contacts which are made from copper alloy with a gold plating. These Micro-D connectors have 2.31mm mounting holes and are available with various termination options: Part numbers: MDM-xxxSB-xxx have solder pot terminations that accept 26AWG max harness wire. Part numbers: MDM-xxxH003B-xxx have harness wire terminations (18", 7 strand 26AWG to MIL-W-16878/4, Type E Teflon, colour coded to MIL-STD-681 system I). Part numbers: MDM-xxxL1B-xxx have 0.5" uninsulated solid 25AWG gold plated copper wire terminations.
1 products found
JPY: 55,800
USD: 349.78
-
ITT Cannon T3P Series, Female Crimp Circular Connector Contact, Wire size 20 AWG 192991-0046
1 products found
JPY: 34,800
USD: 218.14
-
ITT Cannon DL Series, 60 Way Plug Body Plug, 2.54mm Pitch DL3-60P
High Density Connector
Brought to you by ITT Cannon, this DL series of high density connectors are zero insertion force (ZIF)1 products found
JPY: 26,100
USD: 163.61
-
ITT Cannon TR1208PF31NB Series Cable Mount Connector, 8 contacts Plug TR1208PF31NB
Cable Shells. ITT Cannon Trident Connector Series of ring-lock circular connectors. Featuring a rugged metal bayonet connecting system, the Trident Connector Series features a variety of pin configurations for both sockets and receptacles. Ringlocks, cable grip connectors and backshell cable clamps are all available as individual components.
1 products found
JPY: 4,570
USD: 28.65
-
ITT Cannon Crimp Extraction Tool for Cannon Trident Series Pin Contact, Contact size 16 → 12AWG 192900-0176
Plier and Ratchet Crimp Tools. Suitable for QM single and two piece contacts. Plier tool can also be used to crimp contacts for the Circular Sealed Industrial IP67 connector range and the Sealed Industrial IP68 connector range stock no. 489-526. Instructions supplied with tools.
1 products found
JPY: 14,000
USD: 87.76
-
ITT Cannon Sure Seal Series Cable Mount Connector, 3 contacts Socket 120-8551-001
Contacts must be ordered separately see stock numbers: ; 167-9499 167-9499 male or ; 167-9506 167-9506 female. For the necessary tooling see stock number ; 167-9534 167-9534 typical.. Sureseal Cable Receptacle
1 products found
JPY: 9,520
USD: 59.68
