[CAL]Electronic/Electrical Parts and Controll Equipments
Filters
-
CAL 3300 PID Temperature Controller, 48 x 24 (1/32 DIN)mm, 2 Output Relay, SSD, 100 V ac, 240 V ac Supply Voltage 330000000
CAL 3300 Temperature Controller. The CAL 3300 1/32DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Designed for industrial or scientific applications CAL3300 has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. 1 x 4 digit LED display with 2 outputs LED Easy-to-use autotuning Simple menu-driven configuration Single ramp/soak (dwell) program IP66 protection CALgrafix datalogging software
1 products found
JPY: 61,400
USD: 384.88
-
CAL 3200 PID Temperature Controller, 48 x 24 (1/32 DIN)mm, 2 Output Relay, 12 V ac/dc Supply Voltage 320040
CAL 3200 Series Temperature Controller. The CAL 3200 temperature controller is designed for easy use and installation and is reliable within the most demanding process and manufacturing applications. Suitable for use in a 1/32DIN panel cut out and is suitable for a wide range of environments. Designed for a variety of applications, the CAL3200 is made for use in both industrial and scientific environments. The impact resistant, smoked fascia has large rubberised buttons with positive feedback for trusted operation. This aids both in user functionality and durability over time, with reliability that typical operation will remain consistent and without fail. Features and Benefits. Ultra-compact 24mm x 48mm profile Universal 1/32DIN Input Auto tune PID Dual 2A relay output plus SSR drive IP65 / NEMA 4X sealed fascia 4 bright 10mm LED display digits Positive feel buttons 5 alarm modes 9 thermocouples, RTD/PT100 inputs Removable rear screw terminal block Available in 12V, 24V and 90/264V supply. PID tuning is simple and efficient whilst the unique DAC function minimises overshoot. The ‘one shot ‘ autotune algorithm The IP65 / NEMA 4X sealed fascia gives full protection against dust as well as low pressure water jets from any direction to ensure reliability in wet or heavy dust areas over time and with the addition of large rubberised buttons, use in any environment is easy. 9 thermocouples as well as RTD and PT100 inputs cover all popular sensor types and are linearised over their full usable range for maximum functionality in any sector. The 3200 ‘s 5 alarm modes gives flexibly in application with both deviation and full scale alarm options. Choosing between high, low or band deviation alarms as well as high and low full scale alarms, almost any application can be catered for. ; Other Models Other Models. ; 730-004 730-004 CAL 320000 - 90/264V model ; 196-6305 196-6305 CAL 320040 - 12V model ; 196-6311 196-6311 CAL 320050 - 24V model
1 products found
JPY: 64,600
USD: 404.94
-
CAL 248 mm Right Compound Action Snips for Low Carbon Cold Rolled Steel 73800227
Aviation-type radius shears. Wiss aviation scissors are available in 3 versions:. M-1R: red sheathed shears for straight cuts and left radii. M-2R: green sheathed shears for straight cuts and right radii. M-3R: yellow sheathed shears for straight cuts. These tools are made from superior-quality molybdenum steel. Effective and long-lasting shears, due to close machining tolerances and long, sharp overlapping blades.
1 products found
JPY: 6,800
USD: 42.63
-
CAL Temperature Control Module 3C0000200
CAL 3300 Temperature Controller. The CAL 3300 1/32DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Designed for industrial or scientific applications CAL3300 has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. 1 x 4 digit LED display with 2 outputs LED Easy-to-use autotuning Simple menu-driven configuration Single ramp/soak (dwell) program IP66 protection CALgrafix datalogging software
1 products found
JPY: 27,400
USD: 171.76
-
CAL Temperature Control Module 3C0000400
CAL RS232/RS485 Communication Cards. These RS232/RS485 communication boards can be used to extend the digital output functionality of the CAL range of temperature and process controllers.
1 products found
JPY: 27,400
USD: 171.76
-
CAL 3200 PID Temperature Controller, 48 x 24 (1/32 DIN)mm, 2 Output Relay, 24 V ac/dc Supply Voltage 320050
CAL 3200 Series Temperature Controller. The CAL 3200 temperature controller is designed for easy use and installation and is reliable within the most demanding process and manufacturing applications. Suitable for use in a 1/32DIN panel cut out and is suitable for a wide range of environments. Designed for a variety of applications, the CAL3200 is made for use in both industrial and scientific environments. The impact resistant, smoked fascia has large rubberised buttons with positive feedback for trusted operation. This aids both in user functionality and durability over time, with reliability that typical operation will remain consistent and without fail. Features and Benefits. Ultra-compact 24mm x 48mm profile Universal 1/32DIN Input Auto tune PID Dual 2A relay output plus SSR drive IP65 / NEMA 4X sealed fascia 4 bright 10mm LED display digits Positive feel buttons 5 alarm modes 9 thermocouples, RTD/PT100 inputs Removable rear screw terminal block Available in 12V, 24V and 90/264V supply. PID tuning is simple and efficient whilst the unique DAC function minimises overshoot. The ‘one shot ‘ autotune algorithm The IP65 / NEMA 4X sealed fascia gives full protection against dust as well as low pressure water jets from any direction to ensure reliability in wet or heavy dust areas over time and with the addition of large rubberised buttons, use in any environment is easy. 9 thermocouples as well as RTD and PT100 inputs cover all popular sensor types and are linearised over their full usable range for maximum functionality in any sector. The 3200 ‘s 5 alarm modes gives flexibly in application with both deviation and full scale alarm options. Choosing between high, low or band deviation alarms as well as high and low full scale alarms, almost any application can be catered for. ; Other Models Other Models. ; 730-004 730-004 CAL 320000 - 90/264V model ; 196-6305 196-6305 CAL 320040 - 12V model ; 196-6311 196-6311 CAL 320050 - 24V model
1 products found
JPY: 64,600
USD: 404.94
-
CAL 3300 PID Temperature Controller, 48 x 24 (1/32 DIN)mm, 2 Output Relay, 100 V ac, 240 V ac Supply Voltage 331100000
CAL 3300 Temperature Controller. The CAL 3300 1/32DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Designed for industrial or scientific applications CAL3300 has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. 1 x 4 digit LED display with 2 outputs LED Easy-to-use autotuning Simple menu-driven configuration Single ramp/soak (dwell) program IP66 protection CALgrafix datalogging software
1 products found
JPY: 42,000
USD: 263.27
-
CAL 9400 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Relay, 100 V ac, 240 V ac Supply Voltage 941100000
UL. CAL 9400 Temperature Controller. The CAL 9400 1/16DIN dual-display temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Designed for industrial or scientific applications CAL 9400 has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique DAC function minimises overshoot. ; 2 x 4 digit LED display with 2 output LEDs ; Easy-to-use autotuning ; Simple menu-driven configuration ; Single ramp/soak (dwell) program ; IP66 protection ; CALgrafix configuration & datalogging software
1 products found
JPY: 49,200
USD: 308.41
-
CAL 9400 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Relay, SSD, 100 V ac, 240 V ac Supply Voltage 940000000
UL. CAL 9400 Temperature Controller. The CAL 9400 1/16DIN dual-display temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Designed for industrial or scientific applications CAL 9400 has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique DAC function minimises overshoot. ; 2 x 4 digit LED display with 2 output LEDs ; Easy-to-use autotuning ; Simple menu-driven configuration ; Single ramp/soak (dwell) program ; IP66 protection ; CALgrafix configuration & datalogging software
1 products found
JPY: 77,700
USD: 487.06
-
CAL 9500 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Linear, Relay, 100 V ac, 240 V ac Supply Voltage 95B11PA000
CAL 9500P Temperature Controller. The CAL 9500P 1/16DIN programmable temperature controller has a programmer function with up to 31 programs (126 segments max). It is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Styled for laboratory or industrial applications CAL 9500P has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. The integrated programmer function is ideal for applications requiring temperature profile control. 2 x 4 digit LED display with 2 output LEDs Easy-to-use autotuning Simple menu-driven configuration Programmer function – 31 programs of up to 126 segments (fixed memory) IP66 protection CALgrafix configuration ; datalogging software
1 products found
JPY: 137,000
USD: 858.77
-
CAL 9500 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Linear, Relay, SSD, 100 V ac, 240 V ac Supply 95B21PA000
CAL 9500P Temperature Controller. The CAL 9500P 1/16DIN programmable temperature controller has a programmer function with up to 31 programs (126 segments max). It is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Styled for laboratory or industrial applications CAL 9500P has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. The integrated programmer function is ideal for applications requiring temperature profile control. 2 x 4 digit LED display with 2 output LEDs Easy-to-use autotuning Simple menu-driven configuration Programmer function – 31 programs of up to 126 segments (fixed memory) IP66 protection CALgrafix configuration ; datalogging software
1 products found
JPY: 79,000
USD: 495.21
-
CAL MAXVU16 1/16 DIN PID Temperature Controller, 48 x 48mm 1 Input, 2 Output Relay, 110 → 240 V ac Supply Voltage MV160MRR021U0
CAL MAXVU Temperature Controller 1/16 DIN. The MAXVU temperature controller from CAL is designed to offer essential temperature control in an easy-to-install device that is fast to program with improved display visibility. MAXVU provides an affordable solution for applications where primary temperature control functions such as heat only or heat/cool are needed, it offers a universal input and up to 3 outputs with a choice of either relay or SSR. Typical applications include packaging processes such as sealers and many more. ; High visibility 18mm display (10.2mm lower display) ; Wide viewing angle ; Good performance in sunlight ; Quick set-up menu with top 10 configuration parameters ; Thermocouple, PT100 or linear DC sensor input ; Up to 3 outputs, relay or SSR ; 2 process alarms- high/low, deviation or band ; 3 button operation ; 2 x 4 digit display & 3 output status LEDs ; Front panel configuration or PC configuration software ; User can set-up in 60 seconds ; RS485 Modbus RTU communications
1 products found
JPY: 34,600
USD: 216.89
-
CAL MAXVU16 1/16 DIN PID Temperature Controller, 48 x 48mm 1 Input, 2 Output Relay, SSR, 110 → 240 V ac Supply MV160MAR021U0
CAL MAXVU Temperature Controller 1/16 DIN. The MAXVU temperature controller from CAL is designed to offer essential temperature control in an easy-to-install device that is fast to program with improved display visibility. MAXVU provides an affordable solution for applications where primary temperature control functions such as heat only or heat/cool are needed, it offers a universal input and up to 3 outputs with a choice of either relay or SSR. Typical applications include packaging processes such as sealers and many more. ; High visibility 18mm display (10.2mm lower display) ; Wide viewing angle ; Good performance in sunlight ; Quick set-up menu with top 10 configuration parameters ; Thermocouple, PT100 or linear DC sensor input ; Up to 3 outputs, relay or SSR ; 2 process alarms- high/low, deviation or band ; 3 button operation ; 2 x 4 digit display & 3 output status LEDs ; Front panel configuration or PC configuration software ; User can set-up in 60 seconds ; RS485 Modbus RTU communications
1 products found
JPY: 34,600
USD: 216.89
-
CAL MAXVU16 1/16 DIN PID Temperature Controller, 48 x 48mm 1 Input, 3 Output Relay, 110 → 240 V ac Supply Voltage MV160MRRR021U0
CAL MAXVU Temperature Controller 1/16 DIN. The MAXVU temperature controller from CAL is designed to offer essential temperature control in an easy-to-install device that is fast to program with improved display visibility. MAXVU provides an affordable solution for applications where primary temperature control functions such as heat only or heat/cool are needed, it offers a universal input and up to 3 outputs with a choice of either relay or SSR. Typical applications include packaging processes such as sealers and many more. ; High visibility 18mm display (10.2mm lower display) ; Wide viewing angle ; Good performance in sunlight ; Quick set-up menu with top 10 configuration parameters ; Thermocouple, PT100 or linear DC sensor input ; Up to 3 outputs, relay or SSR ; 2 process alarms- high/low, deviation or band ; 3 button operation ; 2 x 4 digit display & 3 output status LEDs ; Front panel configuration or PC configuration software ; User can set-up in 60 seconds ; RS485 Modbus RTU communications
1 products found
JPY: 39,400
USD: 246.98
-
CAL MAXVU16 1/16 DIN PID Temperature Controller, 48 x 48mm 1 Input, 3 Output Relay, SSR, 110 → 240 V ac Supply MV160MARR021U0
CAL MAXVU Temperature Controller 1/16 DIN. The MAXVU temperature controller from CAL is designed to offer essential temperature control in an easy-to-install device that is fast to program with improved display visibility. MAXVU provides an affordable solution for applications where primary temperature control functions such as heat only or heat/cool are needed, it offers a universal input and up to 3 outputs with a choice of either relay or SSR. Typical applications include packaging processes such as sealers and many more. ; High visibility 18mm display (10.2mm lower display) ; Wide viewing angle ; Good performance in sunlight ; Quick set-up menu with top 10 configuration parameters ; Thermocouple, PT100 or linear DC sensor input ; Up to 3 outputs, relay or SSR ; 2 process alarms- high/low, deviation or band ; 3 button operation ; 2 x 4 digit display & 3 output status LEDs ; Front panel configuration or PC configuration software ; User can set-up in 60 seconds ; RS485 Modbus RTU communications
1 products found
JPY: 39,400
USD: 246.98
-
CAL MAXVU16 1/16 DIN PID Temperature Controller, 48 x 48mm 1 Input, 3 Output Relay, SSR, 24 V ac/dc Supply Voltage MV160LARR021U0
CAL MAXVU Temperature Controller 1/16 DIN. The MAXVU temperature controller from CAL is designed to offer essential temperature control in an easy-to-install device that is fast to program with improved display visibility. MAXVU provides an affordable solution for applications where primary temperature control functions such as heat only or heat/cool are needed, it offers a universal input and up to 3 outputs with a choice of either relay or SSR. Typical applications include packaging processes such as sealers and many more. ; High visibility 18mm display (10.2mm lower display) ; Wide viewing angle ; Good performance in sunlight ; Quick set-up menu with top 10 configuration parameters ; Thermocouple, PT100 or linear DC sensor input ; Up to 3 outputs, relay or SSR ; 2 process alarms- high/low, deviation or band ; 3 button operation ; 2 x 4 digit display & 3 output status LEDs ; Front panel configuration or PC configuration software ; User can set-up in 60 seconds ; RS485 Modbus RTU communications
1 products found
JPY: 66,100
USD: 414.34
-
CAL 9300 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Relay, SSD, 100 V ac, 240 V ac Supply Voltage 930000000
UL. CAL 9300 Temperature Controller. The CAL 9300 1/16DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Designed for industrial or scientific applications CAL 9300 has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. 1 x 4 digit LED display with 2 output LEDs Easy-to-use autotuning Simple menu-driven configuration Single ramp/soak (dwell) program IP66 protection CALgrafix configuration ; datalogging software
1 products found
JPY: 38,200
USD: 239.45
-
CAL 9300 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Relay, 100 V ac, 240 V ac Supply Voltage 931100000
UL. CAL 9300 Temperature Controller. The CAL 9300 1/16DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Designed for industrial or scientific applications CAL 9300 has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. 1 x 4 digit LED display with 2 output LEDs Easy-to-use autotuning Simple menu-driven configuration Single ramp/soak (dwell) program IP66 protection CALgrafix configuration ; datalogging software
1 products found
JPY: 47,900
USD: 300.26
-
CAL 9500 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Relay, 100 V ac, 240 V ac Supply Voltage 95111PA000
CAL 9500P Temperature Controller. The CAL 9500P 1/16DIN programmable temperature controller has a programmer function with up to 31 programs (126 segments max). It is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Styled for laboratory or industrial applications CAL 9500P has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. The integrated programmer function is ideal for applications requiring temperature profile control. 2 x 4 digit LED display with 2 output LEDs Easy-to-use autotuning Simple menu-driven configuration Programmer function – 31 programs of up to 126 segments (fixed memory) IP66 protection CALgrafix configuration ; datalogging software
1 products found
JPY: 115,000
USD: 720.87
-
CAL 9500 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Relay, SSD, 100 V ac, 240 V ac Supply Voltage 95001PA000
CAL 9500P Temperature Controller. The CAL 9500P 1/16DIN programmable temperature controller has a programmer function with up to 31 programs (126 segments max). It is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Styled for laboratory or industrial applications CAL 9500P has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. The integrated programmer function is ideal for applications requiring temperature profile control. 2 x 4 digit LED display with 2 output LEDs Easy-to-use autotuning Simple menu-driven configuration Programmer function – 31 programs of up to 126 segments (fixed memory) IP66 protection CALgrafix configuration ; datalogging software
1 products found
JPY: 61,600
USD: 386.13
-
CAL 9500 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Relay, 100 V ac, 240 V ac Supply Voltage 95111PB000
CAL 9500P Temperature Controller. The CAL 9500P 1/16DIN programmable temperature controller has a programmer function with up to 31 programs (126 segments max). It is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Styled for laboratory or industrial applications CAL 9500P has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. The integrated programmer function is ideal for applications requiring temperature profile control. 2 x 4 digit LED display with 2 output LEDs Easy-to-use autotuning Simple menu-driven configuration Programmer function – 31 programs of up to 126 segments (fixed memory) IP66 protection CALgrafix configuration ; datalogging software
1 products found
JPY: 73,700
USD: 461.98
-
CAL 9500 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Linear, Relay, 100 V ac, 240 V ac Supply Voltage 95B11PB000
CAL 9500P Temperature Controller. The CAL 9500P 1/16DIN programmable temperature controller has a programmer function with up to 31 programs (126 segments max). It is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Styled for laboratory or industrial applications CAL 9500P has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. The integrated programmer function is ideal for applications requiring temperature profile control. 2 x 4 digit LED display with 2 output LEDs Easy-to-use autotuning Simple menu-driven configuration Programmer function – 31 programs of up to 126 segments (fixed memory) IP66 protection CALgrafix configuration ; datalogging software
1 products found
JPY: 91,400
USD: 572.93
-
CAL 3300 PID Temperature Controller, 2 Output Relay, SSD, 12 → 24 V ac/dc Supply Voltage 330000030
CAL 3300 Temperature Controller. The CAL 3300 1/32DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Designed for industrial or scientific applications CAL3300 has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. 1 x 4 digit LED display with 2 outputs LED Easy-to-use autotuning Simple menu-driven configuration Single ramp/soak (dwell) program IP66 protection CALgrafix datalogging software
1 products found
JPY: 64,600
USD: 404.94
-
CAL 9300 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 2 Output Relay, SSD, 12 → 24 V ac/dc Supply Voltage 930000030
UL. CAL 9300 Temperature Controller. The CAL 9300 1/16DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications. Designed for industrial or scientific applications CAL 9300 has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. 1 x 4 digit LED display with 2 output LEDs Easy-to-use autotuning Simple menu-driven configuration Single ramp/soak (dwell) program IP66 protection CALgrafix configuration ; datalogging software
1 products found
JPY: 74,700
USD: 468.25
-
［Discontinued］CAL 248 mm Left Compound Action Snips for Low Carbon Cold Rolled Steel 73800127
Aviation-type radius shears. Wiss aviation scissors are available in 3 versions:. M-1R: red sheathed shears for straight cuts and left radii. M-2R: green sheathed shears for straight cuts and right radii. M-3R: yellow sheathed shears for straight cuts. These tools are made from superior-quality molybdenum steel. Effective and long-lasting shears, due to close machining tolerances and long, sharp overlapping blades.
1 products found
JPY: 5,600
USD: 35.10
