Eaton

Eaton Contact Block for use with RMQ 16 Series　E10

Eaton Switch Contact Block - RMQ16. Introducing the RMQ16 pilot device range of contact blocks by Eaton. This range of products consists of high quality, durable contact blocks and affiliated products that have been created and designed to be used for several different applications. Features ; Benefits. Front fixing, front mounting of the contact block The block forms part of the RMQ16 Series Quick, simple and easy to install These contact blocks have an IP rating of IP65, this means that the block is protected against dust that may cause harm to equipment. This rating also means that the part os protected against water spray from all directions Durability, electrical AC-15 to IEC/EN 60947-5-1 at 230 V Ie = Rated operational current CE marking UL Listed, CSA certified

Eaton

Eaton, FAK Red Mushroom Push Button, NO/NC Momentary Screw　229746 & FAK-R/KC11/I

UL and CSA. Foot/Palm Switches. 94mm diameter pushbutton Ingress protection to IP67 Five M20 cable entries (one threaded) IEC418 tamperproof Impact resistant housing Rated operational current I ;sub>e ;/sub> AC-15 230Vac 6A, DV-13 24Vdc 3A 6000Vac rated impulse withstand voltage 500V rated insulation voltage

Eaton

Eaton Flash, Fleeting, OFF Delay, ON Delay, Pulse Former, Pulse Generator Multi Function Timer Relay, Screw, 0.05s　ETR4-69-A

Electronic Timing Relays 22.5mm Wide ETR4. 22.5mm wide, DIN rail mounting Wide range supply voltage Star-delta timer with 50ms delay in changeover Multifunction timers 10 time ranges, 9 functions Star-delta timers are 2 interlink pole single throw The multi-function timers are single pole changeover

Eaton

Eaton, NO/NC (2), Auxiliary Contact, Front Mount, 1 A ac, 2 A dc　NHI-E-11-PKZ0

Auxiliary Contacts. For fitting to front or right hand side of MPCB - PKZM0 Standard versions operate when unit is 'ON' or 'OFF' Trip indicating versions identify overload and short-circuit conditions

Eaton

Eaton Overload Relay NO/NC, 3 A, 2 W, 24 → 240 V ac/dc　EMT6-DB

Klockner-Moeller EMT-6 Range. Provide protection to motors or other machines which require the temperature of their windings to be monitored and not exceeded, otherwise serious damage may occur. a.c. or d.c. operating voltages Rated current; 6A DIN rail mounting Can be screw mounted using adaptor (stock no. ; 296-2382 296-2382 )

Eaton

Eaton M22 Series, Red Push Button Head, Momentary, 22mm Cutout　M22-DH-R+M22-A

IEC/EN60947. UL, CSA. Extended Pushbutton. Complete with fixing adapter for contact blocks

Eaton

Eaton M22 2 Position Key Switch Head Latching　M22-WRS+M22-A

IEC/EN60947. UL, CSA. Key operated versions come complete with one key. For extra keys please see stock no. ; 489-3339 489-3339. Selector Switch. Choice of 3 head styles, black in colour Complete with fixing adapter for contact blocks Legend plates available

Eaton

Eaton Contact Block for use with RMQ Titan Series　M22-KC01

IEC/EN60947. UL, CSA. Eaton Contact Block - M22 Series. Introducing the M22 range of contact blocks by Eaton. The M22 range of products consists of high quality, durable contact blocks that have been created and designed to be used for several different applications. Features ; Benefits. Back fixing - rear mounting, behind contact block They are for mounting behind, separately from the actuator. This is to allow separate removal of the panel whilst leaving wiring in place The block forms part of the M22 Series Suitable to use with M22 Series modular push buttons and switches Quick, simple and easy to install These contact blocks have an IP rating of IP20, this means that they are protected against solid objects up to 12mm, but there is no protection against liquids No fixing adapter is required Electrical life: 5 x 10 6 The block features a voltage rating of 500V

Eaton

Eaton Contact Block for use with N(S)1(-4) Series, NZM1(-4) Series, PN1(-4) Series　M22-K10

UL, CSA. Eaton Contact Block - M22 Series. Introducing the M22 range of contact blocks by Eaton. The M22 range of products consists of high quality, durable contact blocks that have been created and designed to be used for several different applications. Features ; Benefits. Front fixing, front mounting contact block The block forms part of the M22 Series Suitable to use with M22 Series modular push buttons and switches Quick, simple and easy to install Heavy - duty construction Features a notched hole mounting with anti-rotation tab These contact blocks have an IP rating of IP20, this means that they are protected again solid objects up to 12mm (2) but there is no protection against liquids

Eaton

Eaton Contact Block for use with RMQ Titan Series　M22-KC10

IEC/EN60947. UL, CSA. Eaton Contact Block - M22 Series. Introducing the M22 range of contact blocks by Eaton. The M22 range of products consists of high quality, durable contact blocks that have been created and designed to be used for several different applications. Features ; Benefits. Back fixing - rear mounting, behind contact block They are for mounting behind, separately from the actuator. This is to allow separate removal of the panel whilst leaving wiring in place The block forms part of the M22 Series Suitable to use with M22 Series modular push buttons and switches Quick, simple and easy to install These contact blocks have an IP rating of IP20, this means that they are protected against solid objects up to 12mm, but there is no protection against liquids No fixing adapter is required Electrical life: 5 x 10 6 The block features a voltage rating of 500V

Eaton

Eaton Contact Block for use with N(S)1(-4) Series, NZM1(-4) Series, PN1(-4) Series　M22-CK10

UL, CSA. Eaton Contact Block - M22 Series. Introducing the M22 range of contact blocks by Eaton. The M22 range of products consists of high quality, durable contact blocks that have been created and designed to be used for several different applications. Features ; Benefits. Front fixing, front mounting contact block The block forms part of the M22 Series Suitable to use with M22 Series modular push buttons and switches Quick, simple and easy to install Heavy - duty construction Features a notched hole mounting with anti-rotation tab These contact blocks have an IP rating of IP20, this means that they are protected again solid objects up to 12mm (2) but there is no protection against liquids

Eaton

Eaton M22 Diaphragm for use with M22(S)-D(R) Series, M22(S)-DL Series, M22(S)-DRL Series, M22(S)-L(C) Series　M22-T-D

IEC/EN60947. UL, CSA. Pushbutton Shroud. Transparent diaphragm for severe environment conditions and use in the food industry Do not use with label mounts since degree of protection is not guaranteed IP67 protection rating

Eaton

Eaton M22 Series, Green Push Button Head, Momentary, 22mm Cutout　M22-DL-G+M22-A+M22-LED-G

IEC/EN60947. UL, CSA. Switch body supplied separately. Illuminated Pushbutton. Choice of colours complete with fixing adapter and LED element Two voltages available 22mm pushbutton assembly

Eaton

Eaton M22 Series, Red Pilot Light Head, 22.5mm Cutout　M22-L-R+M22-A+M22-LED-R

IEC/EN60947. UL, CSA. Indicator Assembly with LED

Eaton

Eaton M22 Series, Red Push Button Head, Turn to Release, 22mm Cutout　M22-PVT+M22-A+M22-XAK1

IEC/EN60947. UL, CSA. Illuminated models require a suitable LED to be fitted (see stock no. ; 399-3646 399-3646 or ; 399-3747 399-3747 ) Contact blocks must be purchased separately see stock no. ; 399-3551 399-3551 typically. Emergency Stop Switch, Actuator. Tamper proof to ISO 13 850/EN 418 Fits standard 22mm mounting hole 90mm label supplied Protective collar is designed to be used with RMQ Titan E-Stop heads, to reduce the chance of operating a E-Stop unintentionally by striking it, It is fitted between the E-Stop head and the mounting panel

Eaton

Eaton 3 Pole Contactor, 9 A, 24 V dc Coil, xStart, 3NO, 4 kW　DILEM-01-G(24VDC)

CSA, ASE, SEV, UL, NEMKO, DEMKO, BV, RL, USSR, LROS, SEMKO. DILEEM / DILEM Mini Contactors. These units will fit into a DIN 43 880 enclosure Surface or DIN rail mounting Ac coil power consumption: 5.4VA continuous; 30VA inrush Dc coil power consumption: 2.6W 690Vac max contact rating Operating temperature range -20 to +50°C Terminal / finger protection IP20 Dimensions: H58 x W45 x D52 mm

Eaton

Eaton 3 Pole Contactor, 9 A, 24 V dc Coil, xStart, 3NO, 4 kW　DILEM-10-G(24VDC)

CSA, ASE, SEV, UL, NEMKO, DEMKO, BV, RL, USSR, LROS, SEMKO. DILEEM / DILEM Mini Contactors. These units will fit into a DIN 43 880 enclosure Surface or DIN rail mounting Ac coil power consumption: 5.4VA continuous; 30VA inrush Dc coil power consumption: 2.6W 690Vac max contact rating Operating temperature range -20 to +50°C Terminal / finger protection IP20 Dimensions: H58 x W45 x D52 mm

Eaton

Eaton 3 Pole Contactor, 17 A, 24 V dc Coil, xStart, 3NO, 7.5 kW　DILM17-10(RDC24)

DILM Contactors, 3 Phase. X Start is the latest generation of Contactors, Overloads and Relays from Moeller, based on the tried and tested DIL series. This generation of modular components benefits from the advances in technology for motor switching and control, which in turn gives the user a number of additional benefits. Features ; Benefits. All the contactors are modular and have a common design The range is extremely durable, able to handle all demands and features immunity to interference and control circuit reliability-even when used in conjunction with PLCs Electronic power adjustment of the magnet system on the DC contactors enables very small frame sizes so that AC and DC units now have identical dimensions. This now allows direct arrangement of AC and DC contactors beside each other. Three normally-open main contacts DC contactors from 12A have an electronic drive that removes the need for coupling relays and all DC contactors up to 150A have a in-built suppressor circuit Box terminals with double coupling areas gives a guaranteed integrity of connection while wiring different cross-sections and also reduces cabling faults

Eaton

Eaton DILA, 2NO/2NC (4), Auxiliary Contact, Front Mount, 4 A ac, 10 A dc　DILA-XHI22

DILA Auxiliary Contact Modules. Can be used with DILA contactor relays or DILM7 to DILM32 motor contactors

Eaton

Eaton Potentiometer　M22-R1K

IEC/EN60947. UL, CSA. Eaton Potentiometers. Eaton ‘s Rotary Potentiometers enable a user to regulate and change the current that flows through a circuit, these rotary potentiometers can be easily controlled through turning the spindle or knob. Features ; Benefits. Panel mounting Twist action on the rotary to set the value Features an IP66 rating, this means that the potentiometer is protected against dust that may cause harm to it, this rating also means that the potentiometer is protected against low-pressure water jets (all directions) Please refer to the datasheet for specifications on this particular product Forms part of the M22 series. What is a Potentiometer?. A potentiometer is a variable resistor which increases or decreases the resistance in an application. Usually available as either digital or analogue, there are two main types of potentiometers, rotary and linear. Linear - comes in a rectangle strip shape and can be pulled up or down for the required resistance, used a lot within sound systems for mic output or volume control. Rotary - the shaft is housed by a knob, you would find these on dimmer switches or speakers, and turning (usually to the right) will increase the resistance amplifying the output, whether that is light, sound or voltage. How do Potentiometers work?. Potentiometers have two terminals that are fixed to a resistive element (the track). The resistive element is typically wire wound or made from carbon, cermet or conductive plastic. The third terminal is connected to the wiper, which is a sliding contact. As the wiper moves along the track, the resistance changes and the current flowing through the circuit changes.

Eaton

Eaton 3 Pole Contactor, 25 A, 24 V dc Coil, xStart, 3NO, 11 kW　DILM25-01(RDC24)

DILM Contactors, 3 Phase. X Start is the latest generation of Contactors, Overloads and Relays from Moeller, based on the tried and tested DIL series. This generation of modular components benefits from the advances in technology for motor switching and control, which in turn gives the user a number of additional benefits. Features ; Benefits. All the contactors are modular and have a common design The range is extremely durable, able to handle all demands and features immunity to interference and control circuit reliability-even when used in conjunction with PLCs Electronic power adjustment of the magnet system on the DC contactors enables very small frame sizes so that AC and DC units now have identical dimensions. This now allows direct arrangement of AC and DC contactors beside each other. Three normally-open main contacts DC contactors from 12A have an electronic drive that removes the need for coupling relays and all DC contactors up to 150A have a in-built suppressor circuit Box terminals with double coupling areas gives a guaranteed integrity of connection while wiring different cross-sections and also reduces cabling faults

Eaton

Eaton M22 Contact Block 1NO 500 V Screw terminal　M22-AK10

Contact Blocks With Fixing Collar. These 22mm Titan range contact blocks from Eaton include the fixing collar which allows for quick assembly of panel mount indicators and control components.. Screw Terminals Front fixing Mechanical lifespan > 5,000,000 operations IP20 degree of ingress protection Operating temperature of -25°C to +70°C

Eaton

Eaton M22 Contact Block 1NC 500 V Screw terminal　M22-AK01

Contact Blocks With Fixing Collar. These 22mm Titan range contact blocks from Eaton include the fixing collar which allows for quick assembly of panel mount indicators and control components.. Screw Terminals Front fixing Mechanical lifespan > 5,000,000 operations IP20 degree of ingress protection Operating temperature of -25°C to +70°C

Eaton

Eaton 3 Position 60° Rotary Switch, 220 V dc, 500 V ac, 6 A, Knob Actuator　M22-WRK3/K20

Complete Selector Switches. Complete selector switch unit Mechanical lifespan > 1,000,000 operations IP66 degree of ingress protection Operating temperature of -25°C to +70°C. This range of complete selector switch units from the Eaton RMQ Titan 22mm series is designed to simplify the process of buying individual components. These units comprise of the selector switch actuator, fixing collar and contact block. ; 8103807 8103807 is a key operated selector switch.

Eaton

Eaton Selector for use with Selector Switch　036598 & Q18WK1R

Stay-put Action Selector Switch. Available in 18mm and 25mm square bezel sizes

Eaton

Eaton Selector for use with Selector Switch　072309 & Q18WK3R

Stay-put Action Selector Switch. Available in 18mm and 25mm square bezel sizes

Eaton

Eaton Key Operator for use with Key Operated Switch　038805 & Q18S1R

One key supplied with keyswitch. Stay-put Action Key Switch

Eaton

Eaton Key Operator for use with Key Operated Switch　072314 & Q18S3R

One key supplied with keyswitch. Stay-put Action Key Switch

Eaton

Maintenance key for 63/80/100A switch　78627341 & KNK-P3(RS257-9716)

Maintenance Keys. For operation of interlocked switches after opening panel door

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 0.25 kW, 230 V ac with EMC Filter, 1.4 A DE11, IP20　180650 & DE11-121D4FN-N20N

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 0.37 kW, 230 V ac with EMC Filter, 2.3 A DE11, IP20　180651 & DE11-122D3FN-N20N

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 0.55 kW, 230 V ac with EMC Filter, 2.7 A DE11, IP20　180652 & DE11-122D7FN-N20N

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 0.75 kW, 230 V ac with EMC Filter, 4.3 A DE11, IP20　180653 & DE11-124D3FN-N20N

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 1.5 kW, 230 V ac with EMC Filter, 7 A DE11, IP20　180654 & DE11-127D0FN-N20N

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 2.2 kW, 230 V ac with EMC Filter, 9.6 A DE11, IP20　180655 & DE11-129D6FN-N20N

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 0.25 kW, 230 V ac, 1.4 A DE11, IP20　180656 & DE11-121D4NN-N20N

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 0.37 kW, 230 V ac, 2.3 A DE11, IP20　180657 & DE11-122D3NN-N20N

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 0.55 kW, 230 V ac, 2.7 A DE11, IP20　180658 & DE11-122D7NN-N20N

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 0.75 kW, 230 V ac, 4.3 A DE11, IP20　180659 & DE11-124D3NN-N20N

Eaton

Eaton Variable Speed Starter, 1-Phase In, 60Hz Out 1.5 kW, 230 V ac, 7 A DE11, IP20　180660 & DE11-127D0NN-N20N