HARTING

Crimping tool　09990000110

These connectors cannot be engaged or unengaged under electrical load. If you place the same or different types of connectors on a row, be sure to polarize them to prevent incorrect connections.
UL, CSA, SEV

HARTING

Crimp Extraction Tool Han Series　09990000052

These connectors cannot be engaged or unengaged under electrical load. If you place the same or different types of connectors on a row, be sure to polarize them to prevent incorrect connections.
UL, CSA, SEV

HARTING

Harting Sealing Screw for use with HD Connector　9200009918

IP65 Sealing Screw and Polarisation Pin. The sealing screw is used in conjunction with the Han® 3A/4A connectors to enhance the IP rating from the standard IP44 to IP65

HARTING

Harting Ratchet Crimping Tool for Crimp Contact　9990000021

Harting Service Crimp Tool. A service crimp tool from Harting for use with solid turned Han D, Han E, and Han-Yellock Series crimp contacts. This crimp tool offers interchangeable locators designed for this range of crimp contacts and is capable of crimping male and female contacts from 0.14 mm to 2.5 mm. A ratchet mechanism has been incorporated into the device that prevents premature opening before the completion of a crimp, ensuring consistent crimping quality. Features and Benefits Designed to operate on Harting Han D, Han E and Han-Yellock series crimp contacts Interchangeable locator Ratchet Action Early Release Action Reduced hand strain What do you get? Service crimp tool Locator Han D (supplied loose) Locator Han E (mounted) Instructions Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ: What are the benefits of a locator? The locator guarantees that the crimp contact is terminated in the proper position. They can be removed by unscrewing the fixing screw on the fixed jaw. What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, where-as the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

HARTING

Harting Crimp Extraction Tool for HAN Series Crimp Contact　9990000319

These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection. UL, CSA, SEV. Han-Com® inserts have mixed power and signal formats. A typical identifier is ‘4//2 ‘ which means there are 4 power contacts and 2 signal contacts. The current rating is different for each type of contact within a particular insert. Han-Com®, Han D®, Han DD® and Han® E Crimp Contacts. A range of high quality turned crimp contacts for Han-Com®, Han D®, Han DD® and Han® E inserts. The appropriate parallel action crimp to tool is also available for optimum crimp quality, as is the appropriate service crimp tool. Features ; Benefits. The parallel action crimp tool offers optimal crimp quality and features a rotating locator. See stock number ; 114-7706 114-7706. For service and small assembly, the service crimp tool is offered complete with locator. See stock number ; 313-6607 313-6607. Product Application Information. The Han-Com combination connectors are industrial connectors designed for providing power and signal contacts in one insulation body. The Han-Q Series are connector inserts with a compact design, while the Han D/DD/DDD series are connectors built for high pin count interconnect applications.

HARTING

Harting Crimp Extraction Tool for Han Series Crimp Contact, Contact size Han C　9990000305

Extraction Tool Type Han C Shells. From Harting, this tools is specially designed for extracting Type Han C contacts easily and efficiently.

HARTING

Male 9 Way D-sub Connector Dust Cap, IP67 Rated　9670029055

Dust cap. Metal shielding cap, tin plated

HARTING

Male 9 Way D-sub Connector Dust Cap, IP67 Rated, Metal　9670029050

Dust cap. Metal shielding cap, tin plated

HARTING

Female 9 Way D-sub Connector Dust Cap, IP67 Rated　9670029060

Dust cap. Metal shielding cap, tin plated

HARTING

Harting Male UNC 4-40 Knurled Screw Suitable For D-sub for use with D-Sub Connector　9670009971

IEC 60 807. Side entry hoods with internal screening. From Harting, these side entry hoods are for use with the Harting series of D-sub connectors. The hoods are constructed from grey thermoplastic and feature internal tin-plate screening, so a robust housing is assured. With a metal lamp and screws, these hoods guarantee a secure cable termination. The knurled screw is not included, but is available as an accessory (see stock number ; 692-5889 692-5889 .)

HARTING

Insertion & Extraction Combination Tool size 1.7mm　9990000171

IEC 60 807. Harting Sub-D Connector Crimp Contacts and Tooling. From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool. Appropriate tooling for Harting D-sub crimps includes the following:. Stock number ; 740-6657 740-6657 is an Insertion and Extraction Tool Stock number ; 100-8566 100-8566 is a Manual Crimp Tool

HARTING

Harting Female UNC 4-40 Screw Lock Suitable For D-sub for use with D-Sub Connector　9670009973

MIL-C-24308; DIN 41652; CECC 75301-802. Harting D-Sub Screwlocking Assemblies. Screwlocking assemblies for use with Harting Sub D connectors. These screwlocking assemblies have a nickel or tinned finish. Male jackscrew for 9 - 37 contacts Female jackscrew for 9 - 50 contacts Stock number ; 873-9854 873-9854 is an M3 hex extender kit consisting of two M3 extenders and washers.

HARTING

Harting Female UNC 4-40 Screw Lock Suitable For D-sub for use with D-Sub Connector　9670019941

MIL-C-24308; DIN 41652; CECC 75301-802. Harting D-Sub Screwlocking Assemblies. Screwlocking assemblies for use with Harting Sub D connectors. These screwlocking assemblies have a nickel or tinned finish. Male jackscrew for 9 - 37 contacts Female jackscrew for 9 - 50 contacts Stock number ; 873-9854 873-9854 is an M3 hex extender kit consisting of two M3 extenders and washers.

HARTING

Female RJ Connector Dust Cap for RJ Type Connectors　9455020000

Harting RJ Industrial® Har-Port Accessories. A range of har-port RJ45 accessories made from polyamide, including har-port protection cover, har-port sealing cover, har-port label holder, har-port label and har-port blind cover.

HARTING

Harting Crimping Tool for RJ45　9458000520

Harting RJ Industrial Gigalink Mounting Tool for Cat 6A Gigalink RJ45 Connectors. RJ Industrial Gigalink mounting tool for quick and reliable mounting of cat 6A Gigalink RJ45 connectors (see stock number ; 771-4854 771-4854 ). This mounting tool has a straight action and ratchet release and accepts a cable cross section range of AWG 28/7 to 24/7.

HARTING

Harting 0999 Series, Crimp Die Set　9990000621

Harting DIN 41612 Series Hand Tools. A range of tooling suitable for use with the DIN 41612 series Types D, E, F, FM and HM of connectors which require crimp contacts. Stock number ; 740-6654 740-6654 is a hand crimping tool for crimping 0.14 to 1.5mm2 contacts to DIN 41641 Stock number ; 740-6663 740-6663 is a basic hand crimping tool frame for BC/FC contacts, dies must be purchased separately. Stock number ; 843-5996 843-5996 is a crimp die for use in crimp tool frame 740-6663 for crimping har-bus 64 crimp contacts with a wire size range of 28-20 AWG and FC1 crimp contacts with a wire size range of 28-24 AWG Stock number ; 843-5990 843-5990 is a crimp die for use in crimp tool frame 740-6663 for crimping contacts with a wire size range of 26-20 AWG Stock number ; 740-6666 740-6666 is a crimp die for use in crimp tool frame 740-6663 for crimping contacts with a wire size range of 20-16 AWG Stock number ; 865-8398 865-8398 is a BC locator for use in crimp tool 740-6663

HARTING

Four Indent Crimp Tool　9990000888

Han Yellock Tools for Contacts. The Han Yellock system is a product series that retains the core functionality of other series but is significantly different from current size and shape formats. The Yellock connector series makes many new functions possible, with increased variability, simplified handling and maximized safety.

HARTING

Harting Female Jack Screw　9670009974

MIL-C-24308; DIN 41652; CECC 75301-802. Harting D-Sub Screwlocking Assemblies. Screwlocking assemblies for use with Harting Sub D connectors. These screwlocking assemblies have a nickel or tinned finish. Male jackscrew for 9 - 37 contacts Female jackscrew for 9 - 50 contacts Stock number ; 873-9854 873-9854 is an M3 hex extender kit consisting of two M3 extenders and washers.

HARTING

Harting Han M23 Ratchet Crimping Tool for Crimp Contact　9990000890

HARTING

Harting Tool Tip DIN 41612 Contact Contact　9990000038

HARTING

Harting Extraction Tool DIN 41612 Contact Contact　9990000103

HARTING

Harting Ratchet Crimping Tool for FC2　9990000119

HARTING

Harting Ratchet Crimping Tool for FC3　9990000120

HARTING

Insertion & Extraction Combination Tool Removal Bit Contacts　9990000513

HARTING

Harting Extraction Tool for DIN 41612 Series　9990000631

HARTING

Harting Inducom Series, Crimp Die, D-sub Connector, Hex size 8.5mm　61030000103

HARTING

Harting Inducom Series, Crimp Die, D-sub Connector, Hex size 11.5mm　61030000169

HARTING

Harting Inducom Series, Crimp Die, D-sub Connector, Hex size 10.5mm　61030000172

HARTING

Harting Inducom Series, Crimp Die, D-sub Connector, Hex size 12mm　61030000175

HARTING

Harting Inducom Series, Crimp Die, D-sub Connector, Hex size 12.5mm　61030000176

HARTING

Harting Inducom Series, Crimp Die, D-sub Connector, Hex size 13.5mm　61030000178

HARTING

Harting Extraction Tool Module Contact　9990000327

HARTING

Harting Extraction Tool　9990000335

HARTING

Harting Extraction Tool　9990000827

HARTING

Harting Extraction Tool　9990000828

HARTING

Harting Extraction Tool Pin Contact　9990000239

HARTING

Harting IDC Series Punch Down　9990000114

UL, E102079, CSA, File 98267. Harting IDC Assembly Tool. Tools for insulation displacement termination

HARTING

Harting Crimping Tool　20990001035

Crimp Tool Multi-Contact (Optical Fiber) Type
For optical fiber crimp with multi-contact shell.

HARTING

Harting Male M3 Knurled Screw Suitable For D-sub for use with D-Sub Connector　9670019965

IEC 60 807. Side entry hoods with internal screening. From Harting, these side entry hoods are for use with the Harting series of D-sub connectors. The hoods are constructed from grey thermoplastic and feature internal tin-plate screening, so a robust housing is assured. With a metal lamp and screws, these hoods guarantee a secure cable termination. The knurled screw is not included, but is available as an accessory (see stock number ; 692-5889 692-5889 .)

HARTING

Harting, Locking Lever　9180009903

Order two Locking Levers per male header. Accessories. A range of Accessories for IDC Ribbon Cable Connectors and Headers: ; 693-5163 693-5163 : single Locking lever long, for fitting to headers for use with IDC female connectors with Strain Relief. ; 693-5176 693-5176 : single Locking lever short, for fitting to headers for use with IDC female connectors without Strain Relief. ; 787-4704 787-4704 : Strain Relief Clamp for 24 way IDC female connector.