[SKF]Pullers & Extraction Tools
Filters
-
SKF TMMA 60 Hydraulic Bearing Puller, 36 → 150 mm capacity TMMA 60
SKF EasyPull TMMA Series. Equipped with spring-operated arms and a solid design, the patented SKF EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the positioning of the puller behind the component with just one movement. Features and Benefits. Hydraulic Pullers TMMA.H Series. Integrated hydraulic cylinder, pump and puller, which is ready to use. Safety valve to prevent spindles and pullers from getting overloaded Easy centring of the puller with the spring loaded centre point The TMMA 75H with a maximum stroke of 75 mm Supplied with extension pieces and one nose piece. Mechanical Pullers TMMA Series. Sturdy design allows dismounting of components in tight applications safely Unique red rings spring-operated opening mechanism allowing the puller to be placed behind the component easily Self locking arms reduce the risk of the puller slipping under load Double hexagonal heads allow easier application of withdrawal force Self-centring capability and nose piece help avoid damage to shaft
1 products found
JPY: 155,000
USD: 964.41
-
SKF TMMK 10-35 Hand Bearing Puller, 10 → 35 mm capacity TMMK 10-35
SKF Combi Kit TMMK series. The SKF TMMK series designed for the quick and precise mounting and dismounting of deep groove ball bearings from shafts, housings and blind housings. A multi-purpose fitting tool is included which is suitable for mounting bearings and bushings, seal rings, belt pulleys and other similar products. For dismounting of deep groove ball bearings from blind housings and shafts, the SKF TMMK series contains a unique three-armed puller. When dismounting deep groove ball bearings from housings, a combination of this puller, sliding hammer and support rings enables easy removal of the bearings. Features and Benefits. The TMMK 10-35 suits bearings with bore diameters from 10 mm to 35 mm The TMMK 20-50 suits bearings with bore diameters from 20 mm to 50 mm Easy selection and identification Correct combination of impact ring and sleeve ensures that mounting forces are not transmitted via the rolling elements of the bearing Impact rings made from polyamide. Impact sleeves made from glass fibre reinforced polyamide which is strong and lightweight Dead-blow hammer with nylon faces. Steel shot loaded for maximum impact. Handle absorbs shock and vibration due to its comfortable rubber grip Claws designed to facilitate a precise fit in the bearings raceways Elastic locking ring for easy connection of puller arms to spindle
1 products found
JPY: 382,000
USD: 2,376.80
-
SKF TMMA 75H Hydraulic Bearing Puller TMMA 75H
SKF EasyPull TMMA Series. Equipped with spring-operated arms and a solid design, the patented SKF EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the positioning of the puller behind the component with just one movement. Features and Benefits. Hydraulic Pullers TMMA.H Series. Integrated hydraulic cylinder, pump and puller, which is ready to use. Safety valve to prevent spindles and pullers from getting overloaded Easy centring of the puller with the spring loaded centre point The TMMA 75H with a maximum stroke of 75 mm Supplied with extension pieces and one nose piece. Mechanical Pullers TMMA Series. Sturdy design allows dismounting of components in tight applications safely Unique red rings spring-operated opening mechanism allowing the puller to be placed behind the component easily Self locking arms reduce the risk of the puller slipping under load Double hexagonal heads allow easier application of withdrawal force Self-centring capability and nose piece help avoid damage to shaft
1 products found
JPY: 296,000
USD: 1,841.71
-
SKF TMMP 3X185 Hand Bearing Puller, 185 mm capacity TMMP 3X185
Standard Jaw Pullers TMMP Series. The TMMP series of standard jaw pullers are versatile and one of the easiest and most effective ways to dismount small to medium size bearings. Using an SKF mechanical jaw puller helps ensure that no damage is caused to the bearing or to the bearing seating during dismounting. SKF standard jaw pullers offer easy and safe jaw puller operation.. Features and Benefits. ;Range of jaw pullers with two or three arms ;Maximum nominal span from 65 mm to 300 mm ;Cone system for automatic centring and secure positioning of arms ;Strong springs to keep arms apart for easy operation ;Hardened, high-quality carbon steel
1 products found
JPY: 88,900
USD: 553.14
-
SKF TMMP 2X65 Lever Press Bearing Puller, 65 mm capacity TMMP 2X65
Standard Jaw Pullers TMMP Series. The TMMP series of standard jaw pullers are versatile and one of the easiest and most effective ways to dismount small to medium size bearings. Using an SKF mechanical jaw puller helps ensure that no damage is caused to the bearing or to the bearing seating during dismounting. SKF standard jaw pullers offer easy and safe jaw puller operation.. Features and Benefits. ;Range of jaw pullers with two or three arms ;Maximum nominal span from 65 mm to 300 mm ;Cone system for automatic centring and secure positioning of arms ;Strong springs to keep arms apart for easy operation ;Hardened, high-quality carbon steel
1 products found
JPY: 36,900
USD: 229.59
-
SKF TMMP 2X170 Hand Bearing Puller, 170 mm capacity TMMP 2X170
Standard Jaw Pullers TMMP Series. The TMMP series of standard jaw pullers are versatile and one of the easiest and most effective ways to dismount small to medium size bearings. Using an SKF mechanical jaw puller helps ensure that no damage is caused to the bearing or to the bearing seating during dismounting. SKF standard jaw pullers offer easy and safe jaw puller operation.. Features and Benefits. ;Range of jaw pullers with two or three arms ;Maximum nominal span from 65 mm to 300 mm ;Cone system for automatic centring and secure positioning of arms ;Strong springs to keep arms apart for easy operation ;Hardened, high-quality carbon steel
1 products found
JPY: 73,600
USD: 457.94
-
SKF TMMR 8F/SET Hand Bearing Puller, 10 pieces TMMR 8F/SET
SKF Reversible Jaw Puller TMMR F Series. These SKF reversible jaw pullers are suitable for the internal and external pulling of bearings and other components, such as gears and pulleys. The eight pullers are of a standard range so are suitable for a wide range of bearing and component sizes. Unlike many similar pullers, the TMMR F series has a spindle tip cone which rotates helping to reduce shaft damage and enhance stability. Features and Benefits. ;Self locking arms for easy adjustment of width grip ;Hexagonal head on beam enables rotation of puller and bearing during dismounting ;Wide gripper range from 23 mm internal to 350 mm external ;Can be used to their full rated load capacity with no permanent deformation of the arms ;Arms and beam are chrome plated for corrosion resistance and easy cleaning. Application Information. Ideal for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles.
1 products found
JPY: 382,000
USD: 2,376.80
-
［Discontinued］SKF Puller Protection Blanket, TMMA Series Puller TMMX 350
SKF Puller Protection Blankets TMMX series. The SKF puller protection blankets, TMMX series, are especially designed to offer extra safety during dismounting bearings or other components. The TMMX series blankets are wrapped around the puller and application after the puller has been placed on the application. Features ; Benefits. Offers extra protection during dismounting jobs Tough transparent plastic allows monitoring during operation Suitable for use with many pullers Specially designed to work with the TMMA series. Product Application Information. After the puller has been positioned, the blanket is wrapped around the puller and application. The transparency of the plastic allows for monitoring of the process during operation. Although designed to be used with the TMMA series pullers, they are also suitable for use with many other pullers.
1 products found
JPY: 12,900
USD: 80.26
-
［Discontinued］SKF 729101/400MPA Hand Bearing Puller, 200 cm³ capacity 729101/400MPA
Oil Injector, Adapter Block, Pressure Gauge, High Pressure Pipe (G3/4-1/4), Connection Nipples (G1/4-1/8, G1/4-1/2 (300 MPA only), G1/4-3/4). SKF Oil Injection Kit - 729101 Series. SKF's oil injection kits provide a safe, efficient and easy way to remove or install bearings on shafts. Suitable for interference fit bearings on both tapered and cylindrical shafts. Oil is injected into oilways machined into the shaft during manufacture. The oil creates a layer between the bearing and shaft that significantly reduces the amount of force required fit or remove the bearing to the shaft. Suitable for use with propellers, rolling bearings, couplings, gears, pulleys and flywheels where the surface pressure is less than 250 N/mm 2 (< 8211251') 8211251 or 350 N/mm 2 (< 8211255') 8211255. Features and Benefits. ;2 m high-pressure hose ;200 cm 3 Oil container capacity ;Pressure Gauge ;G1/4, G1/2 and G3/4 Connection nipples ;Lifespan more than 100.00 cycles. Product Application Information. Can be used with bearings, couplings, railway wheels, flywheels, SKF OK couplings and oil injection applications where maximum pressures of up to 400 MPa are required.
1 products found
JPY: 557,000
USD: 3,465.66
