絞り込み条件
全て解除
解除
Sort by:
Murata Power Solutions
14mm, 3.5 Digit Meter. Auto-zero, auto-polarity Excess voltage protection: ± 250V maximum No external components; ideal for portable instrumentation Bezel available, see ; 176-4193 176-4193 Voltmeter digital modules available see stock nos. ; 163-6492 163-6492 and ; 163-6559 163-6559 Fitted without screws, panel or PCB H23.5 x W55 x D20mm Panel cut-out: 53.8 x 22.3mm Depth behind panel: 19.6mm
1 products found
JPY: 13,000
USD: 81.55
JPY: 13,300
USD: 83.43
9.4mm, 3.5 Digit, Sealed Sub-miniature. Panel/PCB mounting Epoxy encapsulated 12-pin DIP Splash proof Optional bezel with gasket available Auto-polarity ‘Display Enable ‘ function permits power-down mode Over-range indication Dimensions: H22.4 x W35.1 x D18.47mm Panel cut-out: 34 x 22 mm Depth behind panel: 17.45 mm
JPY: 10,300
USD: 64.61
10.2mm, 3.5 Digit Display. Display range and decimal point selected by DIP switches Gain and offset are calibrated by 2 potentiometers Screw terminal connection
JPY: 17,800
USD: 111.66
JPY: 11,400
USD: 71.51
JPY: 11,300
USD: 70.88
9.4mm 3.5 Digit, DC Voltage Monitor. Self-powered; two connections required Ideal replacement for analogue panel meter Reverse polarity protected Rugged ABS case Low power consumption
1 products foundList of 【Murata Power Solutions】Panel Meters & Componentsslider.css?v=03790be0f2ba82c1280907a7033cf49dabaaa7c1" as="style">
Refine by
Clear
JPY: 12,600
USD: 79.04
9.4mm, 3.5 Digit AC Ammeter. Built-in current transformer for direct measurement Large red LED display Sub-miniature installation package 2000V isolation; UL/CSA recognised H22.4 x W35 x D25.4mm Panel cut-out: 33.9 x 21.3mm Depth behind panel: 50.08/52.78/63.28mm (depending on range)
JPY: 19,200
USD: 120.44
JPY: 25,700
USD: 161.21
JPY: 16,200
USD: 101.62
JPY: 19,100
USD: 119.81
53xxx Series SMT Current Sense Transformer. The 5300 series of current sense transformers are designed to monitor AC currents The transformers can be used for high frequency current sensing Suitable for switched-mode power supplies, motor control, and electronic lighting ballasts Surface mount, J-STD-020C reflow
JPY: 300
USD: 1.88
54xxx Series SMT Current Sense Transformer. The 5400 series of current sense transformers are designed to monitor AC currents The transformers can be used for high frequency current sensing Suitable for switched-mode power supplies, motor control, and electronic lighting ballasts Surface mount, J-STD-020C reflow
JPY: 540
USD: 3.39
TMS320F280 Piccolo Microcontrollers. The Texas Instruments F2806x Piccolo™ family of microcontrollers provides the power of the C28x™ with highly integrated control peripherals in low pin-count packages. The family is code-compatible with previous C28x-based code and provides a high level of analogue integration.
JPY: 350
USD: 2.20
56xxx Series Cable Hole Current Sense Transformer. The 5600 series of current sense transformers are designed to monitor AC currents The transformers can be used for high frequency current sensing Suitable for switched-mode power supplies, motor control, and electronic lighting ballasts Available with cable hole primary and single or centre tapped secondary through hole mounting
JPY: 340
USD: 2.13
DCA-20PC - Subminiature DC Ammeters with LED Display and Built-In Shunts. The DCA-20PC Series are the first digital dc ammeters to include built-in shunts for measuring dc currents up to 20A. Six ranges provide for precision measurement of dc currents from 200uA to 20A. These ammeters are 100% self-contained; no calibration or user-supplied components are required. They even include terminal blocks for your external load circuit, a feature that enables simple 3-wire operation. Large, easy-to-read, LED display with 9.4mm high digits LED Colour is the Low-Power Red version Built-in shunts for digitally measuring dc currents from 200μA to 20A Functionally complete, no additional components required Wide power supply inputs with a range from 5 to 40Vdc (non-isolated) or 8-36Vdc (isolated) 20mV internal shunt minimizes power loss Includes load connections for easy 3 or 4-wire operation High resolution; Factory calibrated to ±0.1% accuracy Small package size: 35.1 x 22.4 x 26.4 mm
JPY: 15,700
USD: 98.48
JPY: 15,800
USD: 99.11
DMR20-10-DCM - Self Powered Auto-Ranging DC Voltage Monitor. The volt meter DMR20-10-DCM self-powered, auto-ranging DC voltage monitors are designed to measure and display the outputs the most popular DC power systems. Simply connect any 6 to 75 Vdc power source and these meters are fully operational, no additional components or power sources are required. The DMR20-10-DCM is housed in a rugged, round polycarbonate case that provides excellent protection against moisture, dust, shock and vibration. Four-digit LED display (7.6 mm) with overvoltage indication Auto-ranging 6 to 75 Vdc input range Reverse polarity protected to –100 Vdc Self-powered, requires only two connections Digital replacement for analog panel meters Screw-style terminal block simplifies installation Self-resetting internal fuse for long-term reliability Provides moisture resistance to IP67/NEMA 6 Operating temperature range of -25 to +60 °C Installs in 30.5 mm round cutouts Supplied with EPDM rubber gasket and plastic hex nut
DMR20-1-ACV - Self-Powered LED Display Line Monitor. The volt meter DMR20-1-ACV is self-powered, AC line-voltage monitors are designed to measure and display the true-RMS voltage of AC power systems. Simply connect any 85 to 264 Vac 50/60 Hz power source and these meters are fully operational, no additional components or power sources are required. The unit can also measure distorted AC power sources including triangle, square, and the quasi-sine output of many DC to AC power inverters. The DMR20-1-ACV is housed in a rugged, round polycarbonate case that provides excellent protection against moisture, dust, shock and vibration. Four-digit LED display (7.6 mm) with overvoltage indication Universal 85 to 264 Vac measurement range Self-powered directly from the AC supply Reads true-RMS value to 0.1 V resolution Digital replacement for analog panel meters Screw-style terminal block simplifies installation Self-resetting internal fuse for long-term reliability Provides moisture resistance to IP67/NEMA 6 Operating temperature range of -25 to +60 °C Installs in 30.5 mm round cutouts Supplied with EPDM rubber gasket and plastic hex nut
JPY: 12,000
USD: 75.27
DMS-20LCD - Subminiature Digital Panel Voltmeters. The digital voltmeter DMS-20LCD series represent the ultimate combination of low price, low power, small size and high performance in digital meters. Epoxy encapsulated in a subminiature 12-pin DIP package, these completely self-contained, fully operational meters offer a combination of ruggedness, long-term reliability and component-like ease-of-use simply not available in any other meters. Digital Voltmeters with 3.5 digit LCD display Large 9.4mm, enhanced-contrast LCD display 4 differential input voltage ranges High accuracy, ±1 count (±0.05%) User-selectable decimal point place Single +5V supply or 9V battery Lowest power, only 2mW Low-battery annunciator Epoxy-encapsulated, in a12-pin DIP package Subminiature size with 35x22x11 mm Panel or pc-board mountable
JPY: 8,030
USD: 50.37
JPY: 8,360
USD: 52.44
JPY: 7,350
USD: 46.11
JPY: 8,320
USD: 52.19
JPY: 7,880
USD: 49.43
DMS-40LCD - Digital Panel Voltmeters. The digital voltmeter DMS-40LCD series represent the ultimate combination of price, precision and convenience. Epoxy encapsulated in a subminiature 12-pin DIP package, these completely self-contained, fully operational meters offer a combination of ruggedness, long-term reliability and component-like ease-of-use simply not available in any other meters. Digital Voltmeters with 4.5 digit LCD display Large 10.2 mm, enhanced-contrast LCD display 2 input voltage ranges, ±200 mV / ±2 V Scientific-grade accuracy, ±2 counts Single +5 V supply User-selectable decimal point place Low-battery "BAT" annunciator Epoxy-encapsulated, in a 12-pin DIP package Miniature size with 55x23x11 mm
DSD-40BCD - BCD Input, Slave LED Display. The DSD-40BCD digital slave display combines a full-size 4.5 digit LED display with all the other necessary components, including a built-in, contrast-enhancing filter/bezel, to implement a pc-board mountable instrument display. The flexible design gives the user full control of all major display functions including display update rate, number of digits enabled, and decimal point selection. Its TTL-compatible inputs interface directly with most BCD output, integrating analog-to-digital converters, no additional glue logic is required. When used with sophisticated microcomputers, the brightness of any digit can be independently controlled by simply lowering the digit-drive input duty cycle. Digital slave display, BCD input, with 4.5 digit display Large 13.2 mm LED display Choice of red or green LED Single +5 V power supply (175 mW) Epoxy-encapsulated in a 24-pin package Minus sign and decimal points included No external components required PC-board or panel mountable Ideal for computer-based instruments Miniature size with 55x23x14 mm
JPY: 9,240
USD: 57.96
DMS-20PC-DCM - Self-Powered LED DC Voltage Monitors. The digital panel voltmeter DMS-20PC-DCM series of self-powered, positive-reading, DC voltage monitors are great replacements for older, hard-to-read, analogue panel meters. Simply connect a positive DC voltage across the rear terminals and the meters are fully operational, no additional components or power supplies are required. A rugged, epoxy-encapsulated, polycarbonate case provides excellent protection against moisture, shock and vibration. Digital voltmeters with a large 9.4 mm, red or blue, LED display Different input voltage ranges from +4.50- +19.99V to +30.0- +264V Self-powered, only two connections required Ultra-low power consumption (8 mA typ.) Super reliable, epoxy-encapsulated, construction Subminiature size with 35x22.4x25.4 mm Built-in reverse polarity protection assures simple, trouble-free installation Ideal replacements for analogue panel meters
JPY: 14,500
USD: 90.96
DMS-30PC - Miniature Digital Panel Voltmeters. The digital panel voltmeter DMS-30PC series is a broad line of self-contained, fully operational, 3.5 digit voltmeters with large, easy-to-read LED displays. The 14.2 mm high LED's are available in a wide variety of colours. Each meter incorporates a stable, double-regulated reference and is fully calibrated before potting. Digital Voltmeters with 3.5 digit display Large 14.2 mm LED display Different LED colours available 3 differential input voltage ranges Auto calibration, ±1 Count accuracy User-selectable decimal point placement Single +5 V power supply Epoxy-encapsulated in a 12-pin DIP package Miniature size with 55 x 23 x 14 mm Panel or pc-board mountable
JPY: 14,200
USD: 89.07
JPY: 13,500
USD: 84.68
LED Digital Ammeter. 3 1/2 digit, 14.2mm high low power red LED display Single +5V or optional +7.5-32V supply DIP-switch selectable range and decimal points Offset adjustable for 1-5V applications
10.2mm 3-Digit, Two-wire AC Line Frequency Monitor. Self-powered; no external supply required Large easily readable LED display Reads true line frequency to ±0.1Hz Screw terminal connection Epoxy encapsulated for harsh environments Dimensions: H22.4 x W35.1 x D25.4mm Panel cut-out: 33.9 x 21.3mm
JPY: 13,800
USD: 86.56
DCA5-20PC - Subminiature DC Ammeter with LED Display and mV Input for external Shunt. The DCA5-20PC Series dc ammeters are specifically designed to display the output of all popular 50mV and 100mV dc-shunts. 25 input ranges provide for precision measurement of dc currents from 1.000A to 2000A. With the exception of an external shunt, the unit is 100% self-contained, no calibration or user-supplied components are required. Large, easy-to-read, LED display with 9.4mm high digits LED Colour is the Low-Power Red version Scales and displays the output of 5A to 2000A, 50mV and 100mV shunts 50mV shunts also available (e.g stock-no. ; 810-3267 810-3267 ) Factory calibrated to ±0.1% accuracy Wide power supply inputs with a range from 5 to 40V dc (non-isolated) or 8-36V dc (isolated) Reverse-polarity protection Completely self-contained, no additional components required Small package size: 35.1 x 22.4 x 25.4 mm Screw-style terminal blocks Use for digital upgrade for analogue meters
DMS-20PC - Subminiature Digital Panel Voltmeters. The digital panel voltmeter DMS-20PC series with a 3.5 digit LED Display combine a precision A/D converter; a factory-trimmed, highly stable, voltage reference; and a large 9.4 mm, easy-to-read LED display in a single package that is only slightly larger than the display itself. These low-cost meters are fully self-contained and fully functional. Their subminiature epoxy-encapsulated cases incorporate built-in colour filters and bezels; are moisture and vibration proof; and function well in the harshest environments. Digital Voltmeters with 3.5 digit LED display Large 9.4 mm display in Blue or Red 3 differential input voltage ranges Factory calibrated,±1 count accuracy User-selectable decimal point placement Display enable function for "power-down" mode Single +5 V power supply Epoxy-encapsulated in a12-pin DIP package Subminiature size with 35x22x12 mm Panel or pc-board mountable
JPY: 12,300
USD: 77.16
