[Bopla]Enclosures
Filters
- by Product group
- by Product
Sort by:
-
Bopla 122 x 88 x 18mm DIN Rail Clip for use with TS 35 (Top Hat DIN Rail) 22035000
Bopla Universal DIN Rail Holder TSH 35. The TSH 35 Din rail holder, for use with all Bopla enclosures that support DIN rails. This DIN rail holder consists of a base and a bolt, the bolt can be snapped into the base in various positions. It is fitted approximately in the middle of the enclosure, and the bolt projecting from the enclosure base can be disconnected from the rail by means of a screwdriver. How to assemble. For assembly, insert the screws from the inside of the enclosure this guarantees full insulation protection. On small enclosures, the part of the bolt which projects upwards can be pinched off. In the case of very wide enclosures, it may be necessary to fit two DIN rail holders. Features and Benefits. Material: Polyamide Holder consists of two pieces - the foot and the latch Colour: Black Ideal for use with enclosure heights between 70 mm and 160 mm. What ‘s in the box?. 1 DIN rail holder, screws for enclosure mounting. Typical Applications. Bopla Universal DIN rail holder TSH 35 are typical used in general purpose enclosures that support Top Hat DIN Rail applications
1 products found
JPY: 2,030
USD: 12.63
-
Bopla Euromas II, ABS Enclosure, IP65, Flanged, 250 x 160 x 57mm 63239000
Euromas II ABS Enclosures. Introducing a range of ABS enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of ABS plastic and presented in a light grey colour (RAL7035). These general-purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures? The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits:. ABS general purpose enclosures (UV stabilised) Multiple sizes available to meet your specification Recyclable High impact resistance Colour: Light grey (similar to RAL 7035) Wall mountable Corrosion resistant Flammability rating: UL 94 HB Temperature range: +74 °C IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management Traffic Control IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. Compatible Accessories Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact and water in electrical enclosures. Frequently Asked Questions. Can the enclosure be used outside? General purpose enclosures with an IP65 rating is fully waterproof/weatherproof. Does this product have RFI shielding? No, this product does not have RFI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 11,600
USD: 72.18
-
Bopla Euromas, ABS Enclosure, IP66, Flanged, 160 x 80 x 90mm 3235000
Euromas ABS Enclosures. Introducing a range of ABS enclosures from Bopla. The Euromas ABS range is an excellent choice to house electronic and electrical components, made of ABS plastic and presented in a light grey colour similar to (RAL7035). These general-purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures? The Euromas series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components in industrial applications. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features ; Benefits. ABS general purpose enclosures (UV stabilised) Industrial application Multiple sizes available to meet your specification Recyclable High impact resistance Colour: Light grey (similar to RAL 7035) Wall mountable Corrosion resistant Flammability rating: UL 94 HB IP65 / DIN EN 60529. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact and water in electrical enclosures. Typical Applications. Cable/Wire Management IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. Compatible Accessories Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. Frequently Asked Questions. Can the enclosure be used outside? General purpose enclosures with an IP65 rating is fully waterproof/weatherproof. Does this product have RFI shielding? No, this product does not have RFI shielding What is supplied? Lid and base, lid screws made of V2A, self-tapping screws for mounting bosses
1 products found
JPY: 7,860
USD: 48.91
-
Bopla 127 x 35 x 22mm Decor Strip for use with Botego Front Panel 68121840
Accessories for Botego Case
Design element kit 21 products found
JPY: 2,550
USD: 15.87
-
Bopla Wall Mount for use with RegloCard Plus Series 41000309
Wall housing - RegloCard-Plus range, IP54/65. Polystyrene wall housing system for use in measurement, control and regulation applications Suitable for plugging in mounting or PCBs (horizontal/vertical) Crystal-clear polycarbonate cover Housing with crystal-clear cover: protection rating IP65 Housing with membrane front: protection rating IP54 Hinge side interchangeable by turning the cover Lead-sealable housing Wall brackets, cylinder blocker and aluminium front plates optionally available
1 products found
JPY: 1,100
USD: 6.84
-
ABS Enclosure, Grey, 50 x 50 x 30mm 6050000
ABS square housings. Square models have a moulded-clip system to close the cover. The bases feature mounting bosses for PCBs, threaded inserts and self-tapping screws. Designed to house small electronic assemblies as well as PCBs.
1 products found
JPY: 3,960
USD: 24.64
-
ABS Enclosure, Grey, 100 x 100 x 60mm 6100000
ABS square housings. Square models have a moulded-clip system to close the cover. The bases feature mounting bosses for PCBs, threaded inserts and self-tapping screws. Designed to house small electronic assemblies as well as PCBs.
1 products found
JPY: 7,080
USD: 44.05
-
PS Project Box, Grey, 150 x 80 x 56mm 5440200
Ventilated housing. Housing featuring integrated vertical ventilation slots, and designed to receive all electronic mountings that require ventilation.
1 products found
JPY: 7,340
USD: 45.67
-
Bopla Ultrapult, Sloped Front, ABS, 157.5 x 198.9 x 120.4mm Desktop Enclosure, Light Grey 45320185
Bopla Ultrapult Open Area Consoles. Introducing the Ultrapult console enclosures from Bopla. The Ultrapult range is an excellent choice to house PCBs, electronic and electrical components. They are made of ABS and presented in a light grey colour similar to (RAL7035). These desktop enclosures are the ideal solution for easy operation in applications such as telecommunications systems and are completely customisable to suit your needs. Ultrapult consoles are enclosures with an open area and are typically purchased with front and rear panel accessories. Front ; Rear Panel Accessories. A range of front ; rear panel accessories for Ultrapult consoles. The front panels are equipped with soldered pins for interior fitting while the rear panel sections slide into console. These panels are 2 mm thick and natural-coloured anodised aluminium. Features and Benefits. ABS material Designed to receive an aluminium front ; rear panels Two-part housings are assembled using M3 screws on the underside Bottom section for mounting cards on mounting bosses designed to receive self-tapping screws Colour: Top ; Bottom : Light grey, similar to RAL 7035, Bezel : agate grey RAL 7038 IP 40/ DIN EN 60529. Console External Dimensions. L.290.9 x D.198.9 x H.120.4 mm : RS stock no: ; 161-9330 161-9330 L.157.5 x D.198.9 x H. 120.4 mm : RS stock no: ; 161-9302 161-9302. ;I>Front Panel Accessories ;/I> MPN. 29620180 : RS stock no: ; 161-9346 161-9346 ; for use with MPN. 45620185 : RS stock no: ; 161-9330 161-9330 MPN. 29320180 : RS stock no: ; 161-9324 161-9324 ; for use with MPN. 45320185 : RS stock no: ; 161-9302 161-9302 ;I>Rear Panel Accessories ;/I> MPN. 56031800 : RS stock no: ; 119-9123 119-9123 ; for use with MPN. 45320185 : RS stock no: ; 161-9302 161-9302 MPN. 56061800 : RS stock no: ; 119-9139 119-9139 ; for use with MPN. 45620185 : RS stock no: ; 161-9330 161-9330. Typical Applications. Food and Beverage Industry Telecommunication Industry Cable/Wire Management IT. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. ;I>FAQ's ;/I> ;I>Can the enclosure be used outside? ;/I> These desktop enclosure have an IP40 rated, no protection from liquids. Whats in the box? Console, 4 screw covers, 4 rubber feet, 4 screws
1 products found
JPY: 14,600
USD: 90.84
-
Bopla Ultrapult, Sloped Front, ABS, 290.9 x 198.9 x 120.4mm Desktop Enclosure, Light Grey 45620185
Bopla Ultrapult Open Area Consoles. Introducing the Ultrapult console enclosures from Bopla. The Ultrapult range is an excellent choice to house PCBs, electronic and electrical components. They are made of ABS and presented in a light grey colour similar to (RAL7035). These desktop enclosures are the ideal solution for easy operation in applications such as telecommunications systems and are completely customisable to suit your needs. Ultrapult consoles are enclosures with an open area and are typically purchased with front and rear panel accessories. Front ; Rear Panel Accessories. A range of front ; rear panel accessories for Ultrapult consoles. The front panels are equipped with soldered pins for interior fitting while the rear panel sections slide into console. These panels are 2 mm thick and natural-coloured anodised aluminium. Features and Benefits. ABS material Designed to receive an aluminium front ; rear panels Two-part housings are assembled using M3 screws on the underside Bottom section for mounting cards on mounting bosses designed to receive self-tapping screws Colour: Top ; Bottom : Light grey, similar to RAL 7035, Bezel : agate grey RAL 7038 IP 40/ DIN EN 60529. Console External Dimensions. L.290.9 x D.198.9 x H.120.4 mm : RS stock no: ; 161-9330 161-9330 L.157.5 x D.198.9 x H. 120.4 mm : RS stock no: ; 161-9302 161-9302. ;I>Front Panel Accessories ;/I> MPN. 29620180 : RS stock no: ; 161-9346 161-9346 ; for use with MPN. 45620185 : RS stock no: ; 161-9330 161-9330 MPN. 29320180 : RS stock no: ; 161-9324 161-9324 ; for use with MPN. 45320185 : RS stock no: ; 161-9302 161-9302 ;I>Rear Panel Accessories ;/I> MPN. 56031800 : RS stock no: ; 119-9123 119-9123 ; for use with MPN. 45320185 : RS stock no: ; 161-9302 161-9302 MPN. 56061800 : RS stock no: ; 119-9139 119-9139 ; for use with MPN. 45620185 : RS stock no: ; 161-9330 161-9330. Typical Applications. Food and Beverage Industry Telecommunication Industry Cable/Wire Management IT. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. ;I>FAQ's ;/I> ;I>Can the enclosure be used outside? ;/I> These desktop enclosure have an IP40 rated, no protection from liquids. Whats in the box? Console, 4 screw covers, 4 rubber feet, 4 screws
1 products found
JPY: 18,100
USD: 112.62
-
Bopla 257.4 x 167.8 x 11.4mm Front Panel for use with Ultrapult Enclosures 29620180
Bopla Ultrapult Consoles Front ; Rear Panel Accessories. A range of front ; rear panel accessories for Bopla Ultrapult Consoles. The front panels are equipped with soldered pins for interior fitting while the rear panel sections slide into console. These panels are 2 mm thick and natural-coloured anodised aluminium. Features and Benefits. Aluminium panels Slide rear panel Front soldered lugs 2 mm thickness Natural-coloured anodised aluminium. Front panels. 29320180 : RS stock no: ; 161-9324 161-9324 29620180 : RS stock no: ; 161-9346 161-9346. Rear panels. 56031800 : RS stock no: ; 119-9123 119-9123 56061800 : RS stock no: ; 119-9139 119-9139. Front panels for use with;. 29320180 for use with 45320185 : RS stock no: ; 161-9302 161-9302 29620180 for use with 45620185 : RS stock no: ; 161-9330 161-9330. Rear panels for use with;. 56031800 for use with 45320185 : RS stock no: ; 161-9302 161-9302 56061800 for use with 45620185 : RS stock no: ; 161-9330 161-9330
1 products found
JPY: 12,700
USD: 79.02
-
PS Project Box, Grey, 160 x 133 x 75mm 26160000
Shock-proof Polystyrene Cases. Erosion texture finish IP40 rated PCB fitting with snap fastening Max temperature rating +70°C Supplied as lid, base, 2 plastic front panels, 2 screws
1 products found
JPY: 7,890
USD: 49.09
-
Bopla RegloCard-Plus, ABS, Polycarbonate Wall Box, IP65, 103mm x 131 mm x 186 mm 41130109
UL94 HB. Bopla IP65 RegloCard-Plus Enclosures. Introducing the RegloCard-Plus wall mount enclosures from Bopla. These ABS enclosures offer a list of features including vertical ; horizontal grooves for mounting plates and PCBs. There are terminal connection access points which can be separated from the main electronics space by means of integrated grooves with separate plates. Each enclosure has Pg rated pre-punchings in the terminal compartment and a cover to keep things safe. The RegloCard-series are designed for electrical and electronic storage in measurement and control applications. Pre-Punchings. Drilling open the pre punchings is recommend in order to prevent damage to the enclosure base. Convert cable glands from Pg to metric with no issues. Features and Benefits. Wall mount enclosure Material: ABS, Polycarbonate IP65 rating Lockable lid A rear suspension unit gives a concealed fit on the wall Crystal clear access door Recessed front to accept membrane keypad Flame Resistance; UL 94 HB Shock resistant The cylinder catch for retrofitting in the snap lock protects against unauthorised access Corrosion resistant storage box. Typical Applications. Agricultural technology such as feeding systems and agricultural machinery Security and building technology Measuring and instrumentation applications such as data loggers, sensor technology and control systems for automation technology Renewable energy applications where a high level of ingress protection is needed. FAQs. What are the external dimensions? ;I>Range and Sizes ;/I> Model RCP 1700, MPN. 41170109, external dimensions 121 x 166 x 161 mm : RS Stock no: ; 186-6996 186-6996 Model RCP 1300, MPN. 41130109 - external dimensions 103 x 131 x 186 mm : RS Stock no: ; 186-6974 186-6974 Model RCP 200, MPN. 41200309 - external dimensions 104 x 213 x 185 mm : RS Stock no: ; 186-7012 186-7012 Model RCP 2500, MPN. 41250109 - external dimensions 132 x 132 x 217 mm : RS Stock no: ; 186-7028 186-7028 Model RCP 1600, MPN. 41160109 - external dimensions 93 x 166 x 161 mm : RS Stock no: ; 186-6980 186-6980. Compatible Accessories. Cylinder lock for aluminium front panel; Mfr. Part No. 21008310 : RS stock no: ; 266-3057 266-3057 RegloCard-Plus wall bracket; Mfr. Part No. 41000309 : RS stock no: ; 186-7078 186-7078 ;I>Front Panels ;/I> Mfr. Part No. 27000300; dimensions: 159.5 x 1.5 x 99.5 mm : RS stock no: ; 186-7040 186-7040 Mfr. Part No. 27000500; dimensions: 206.5 x 1.5 x 118.5 mm : RS stock no: ; 186-7056 186-7056 Mfr. Part No. 27000700; dimensions: 250.5 x 2 x 150.5 mm : RS stock no: ; 186-7062 186-7062 Mfr. Part No. 27000100 dimensions: 124.5 x 1.5 x 124.5 mm : RS stock no: ; 186-7034 186-7034. What is in the box?. The enclosure is supplied with a base, crystal clear hinged lid-mounted with snap lock, terminal compartment lid, catch, blind plug and screws.
1 products found
JPY: 18,900
USD: 117.60
-
Bopla RegloCard-Plus, ABS, Polycarbonate Wall Box, IP65, 93mm x 166 mm x 161 mm 41160109
UL94 HB. Bopla IP65 RegloCard-Plus Enclosures. Introducing the RegloCard-Plus wall mount enclosures from Bopla. These ABS enclosures offer a list of features including vertical ; horizontal grooves for mounting plates and PCBs. There are terminal connection access points which can be separated from the main electronics space by means of integrated grooves with separate plates. Each enclosure has Pg rated pre-punchings in the terminal compartment and a cover to keep things safe. The RegloCard-series are designed for electrical and electronic storage in measurement and control applications. Pre-Punchings. Drilling open the pre punchings is recommend in order to prevent damage to the enclosure base. Convert cable glands from Pg to metric with no issues. Features and Benefits. Wall mount enclosure Material: ABS, Polycarbonate IP65 rating Lockable lid A rear suspension unit gives a concealed fit on the wall Crystal clear access door Recessed front to accept membrane keypad Flame Resistance; UL 94 HB Shock resistant The cylinder catch for retrofitting in the snap lock protects against unauthorised access Corrosion resistant storage box. Typical Applications. Agricultural technology such as feeding systems and agricultural machinery Security and building technology Measuring and instrumentation applications such as data loggers, sensor technology and control systems for automation technology Renewable energy applications where a high level of ingress protection is needed. FAQs. What are the external dimensions? ;I>Range and Sizes ;/I> Model RCP 1700, MPN. 41170109, external dimensions 121 x 166 x 161 mm : RS Stock no: ; 186-6996 186-6996 Model RCP 1300, MPN. 41130109 - external dimensions 103 x 131 x 186 mm : RS Stock no: ; 186-6974 186-6974 Model RCP 200, MPN. 41200309 - external dimensions 104 x 213 x 185 mm : RS Stock no: ; 186-7012 186-7012 Model RCP 2500, MPN. 41250109 - external dimensions 132 x 132 x 217 mm : RS Stock no: ; 186-7028 186-7028 Model RCP 1600, MPN. 41160109 - external dimensions 93 x 166 x 161 mm : RS Stock no: ; 186-6980 186-6980. Compatible Accessories. Cylinder lock for aluminium front panel; Mfr. Part No. 21008310 : RS stock no: ; 266-3057 266-3057 RegloCard-Plus wall bracket; Mfr. Part No. 41000309 : RS stock no: ; 186-7078 186-7078 ;I>Front Panels ;/I> Mfr. Part No. 27000300; dimensions: 159.5 x 1.5 x 99.5 mm : RS stock no: ; 186-7040 186-7040 Mfr. Part No. 27000500; dimensions: 206.5 x 1.5 x 118.5 mm : RS stock no: ; 186-7056 186-7056 Mfr. Part No. 27000700; dimensions: 250.5 x 2 x 150.5 mm : RS stock no: ; 186-7062 186-7062 Mfr. Part No. 27000100 dimensions: 124.5 x 1.5 x 124.5 mm : RS stock no: ; 186-7034 186-7034. What is in the box?. The enclosure is supplied with a base, crystal clear hinged lid-mounted with snap lock, terminal compartment lid, catch, blind plug and screws.
1 products found
JPY: 18,000
USD: 112.00
-
Bopla RegloCard-Plus, ABS, Polycarbonate Wall Box, IP65, 121mm x 166 mm x 161 mm 41170109
UL94 HB. Bopla IP65 RegloCard-Plus Enclosures. Introducing the RegloCard-Plus wall mount enclosures from Bopla. These ABS enclosures offer a list of features including vertical ; horizontal grooves for mounting plates and PCBs. There are terminal connection access points which can be separated from the main electronics space by means of integrated grooves with separate plates. Each enclosure has Pg rated pre-punchings in the terminal compartment and a cover to keep things safe. The RegloCard-series are designed for electrical and electronic storage in measurement and control applications. Pre-Punchings. Drilling open the pre punchings is recommend in order to prevent damage to the enclosure base. Convert cable glands from Pg to metric with no issues. Features and Benefits. Wall mount enclosure Material: ABS, Polycarbonate IP65 rating Lockable lid A rear suspension unit gives a concealed fit on the wall Crystal clear access door Recessed front to accept membrane keypad Flame Resistance; UL 94 HB Shock resistant The cylinder catch for retrofitting in the snap lock protects against unauthorised access Corrosion resistant storage box. Typical Applications. Agricultural technology such as feeding systems and agricultural machinery Security and building technology Measuring and instrumentation applications such as data loggers, sensor technology and control systems for automation technology Renewable energy applications where a high level of ingress protection is needed. FAQs. What are the external dimensions? ;I>Range and Sizes ;/I> Model RCP 1700, MPN. 41170109, external dimensions 121 x 166 x 161 mm : RS Stock no: ; 186-6996 186-6996 Model RCP 1300, MPN. 41130109 - external dimensions 103 x 131 x 186 mm : RS Stock no: ; 186-6974 186-6974 Model RCP 200, MPN. 41200309 - external dimensions 104 x 213 x 185 mm : RS Stock no: ; 186-7012 186-7012 Model RCP 2500, MPN. 41250109 - external dimensions 132 x 132 x 217 mm : RS Stock no: ; 186-7028 186-7028 Model RCP 1600, MPN. 41160109 - external dimensions 93 x 166 x 161 mm : RS Stock no: ; 186-6980 186-6980. Compatible Accessories. Cylinder lock for aluminium front panel; Mfr. Part No. 21008310 : RS stock no: ; 266-3057 266-3057 RegloCard-Plus wall bracket; Mfr. Part No. 41000309 : RS stock no: ; 186-7078 186-7078 ;I>Front Panels ;/I> Mfr. Part No. 27000300; dimensions: 159.5 x 1.5 x 99.5 mm : RS stock no: ; 186-7040 186-7040 Mfr. Part No. 27000500; dimensions: 206.5 x 1.5 x 118.5 mm : RS stock no: ; 186-7056 186-7056 Mfr. Part No. 27000700; dimensions: 250.5 x 2 x 150.5 mm : RS stock no: ; 186-7062 186-7062 Mfr. Part No. 27000100 dimensions: 124.5 x 1.5 x 124.5 mm : RS stock no: ; 186-7034 186-7034. What is in the box?. The enclosure is supplied with a base, crystal clear hinged lid-mounted with snap lock, terminal compartment lid, catch, blind plug and screws.
1 products found
JPY: 19,100
USD: 118.84
-
Bopla RegloCard-Plus, ABS, Polycarbonate Wall Box, IP65, 104.5mm x 213 mm x 185 mm 41200309
UL94 HB. Bopla IP65 RegloCard-Plus Enclosures. Introducing the RegloCard-Plus wall mount enclosures from Bopla. These ABS enclosures offer a list of features including vertical ; horizontal grooves for mounting plates and PCBs. There are terminal connection access points which can be separated from the main electronics space by means of integrated grooves with separate plates. Each enclosure has Pg rated pre-punchings in the terminal compartment and a cover to keep things safe. The RegloCard-series are designed for electrical and electronic storage in measurement and control applications. Pre-Punchings. Drilling open the pre punchings is recommend in order to prevent damage to the enclosure base. Convert cable glands from Pg to metric with no issues. Features and Benefits. Wall mount enclosure Material: ABS, Polycarbonate IP65 rating Lockable lid A rear suspension unit gives a concealed fit on the wall Crystal clear access door Recessed front to accept membrane keypad Flame Resistance; UL 94 HB Shock resistant The cylinder catch for retrofitting in the snap lock protects against unauthorised access Corrosion resistant storage box. Typical Applications. Agricultural technology such as feeding systems and agricultural machinery Security and building technology Measuring and instrumentation applications such as data loggers, sensor technology and control systems for automation technology Renewable energy applications where a high level of ingress protection is needed. FAQs. What are the external dimensions? ;I>Range and Sizes ;/I> Model RCP 1700, MPN. 41170109, external dimensions 121 x 166 x 161 mm : RS Stock no: ; 186-6996 186-6996 Model RCP 1300, MPN. 41130109 - external dimensions 103 x 131 x 186 mm : RS Stock no: ; 186-6974 186-6974 Model RCP 200, MPN. 41200309 - external dimensions 104 x 213 x 185 mm : RS Stock no: ; 186-7012 186-7012 Model RCP 2500, MPN. 41250109 - external dimensions 132 x 132 x 217 mm : RS Stock no: ; 186-7028 186-7028 Model RCP 1600, MPN. 41160109 - external dimensions 93 x 166 x 161 mm : RS Stock no: ; 186-6980 186-6980. Compatible Accessories. Cylinder lock for aluminium front panel; Mfr. Part No. 21008310 : RS stock no: ; 266-3057 266-3057 RegloCard-Plus wall bracket; Mfr. Part No. 41000309 : RS stock no: ; 186-7078 186-7078 ;I>Front Panels ;/I> Mfr. Part No. 27000300; dimensions: 159.5 x 1.5 x 99.5 mm : RS stock no: ; 186-7040 186-7040 Mfr. Part No. 27000500; dimensions: 206.5 x 1.5 x 118.5 mm : RS stock no: ; 186-7056 186-7056 Mfr. Part No. 27000700; dimensions: 250.5 x 2 x 150.5 mm : RS stock no: ; 186-7062 186-7062 Mfr. Part No. 27000100 dimensions: 124.5 x 1.5 x 124.5 mm : RS stock no: ; 186-7034 186-7034. What is in the box?. The enclosure is supplied with a base, crystal clear hinged lid-mounted with snap lock, terminal compartment lid, catch, blind plug and screws.
1 products found
JPY: 18,900
USD: 117.60
-
Bopla 64.2 x 34.9 x 10mm Belt Clip for use with Enclosures 34090000
Belt Clip. A multifunctional accessory for hand-held enclosures and small electronic enclosures The clip can be used to attach the enclosure to a shirt pocket or onto a belt or can be folded back to become a desk stand for the enclosure
1 products found
JPY: 1,510
USD: 9.40
-
Bopla Futura, Sloped Front, ABS, 195 x 275 x 48mm Desktop Enclosure, Light Grey 47888200
ABS Keypad Cases. Sloped enclosures with membrane keypad recess, ergonomically designed for DP work places Keypad areas are 110 x 150 (132W case) and 253 x 175 (275W case) Impact resistant, flame resistant to UL940-HB/1.6mm IP40 rated
1 products found
JPY: 14,900
USD: 92.71
-
Bopla Euromas II, Polycarbonate Enclosure, IP65, Flanged, 52 x 50 x 37mm 62205000
Euromas II Polycarbonate Enclosures. Introducing a range of polycarbonate enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of polycarbonate and presented in a light grey colour (RAL7035). These general purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits. Polycarbonate general purpose enclosures (UV stabilised) Recyclable Multiple sizes available to meet your specification Colour: Light grey (similar to RAL 7035) Wall mountable Plug-in slots for PCB ‘s Can be equipped with mounting panels and a DIN Rail for fixing internal equipment Flammability rating: UL 94 V0 Corrosion resistant Supplied with Polychloroprene (CR) Gasket, sunken head lid screws and mounting screws for fixing (Included) IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. PC UL94 V0. One of the most important features of UL94 V0 material is the safety attribute it offers for enclosures near fire and heat. The material classification specifies that the plastic material must be self-extinguishing up to 10 seconds after flame withdrawal and have a glow time no greater than 30 seconds. Also, according to the UL94 V0 classification, it is also imperative that no flaming drops are generated. Compatible Accessories. Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. FAQ's. Can the enclosure be used outside? General purpose enclosures with an IP65 rating are fully waterproof/weatherproof. Does this product have FRI shielding? No, this product does not have FRI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 2,780
USD: 17.30
-
Bopla Euromas II, Polycarbonate Enclosure, IP65, Flanged, 98 x 64 x 38mm 62208000
Euromas II Polycarbonate Enclosures. Introducing a range of polycarbonate enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of polycarbonate and presented in a light grey colour (RAL7035). These general purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits. Polycarbonate general purpose enclosures (UV stabilised) Recyclable Multiple sizes available to meet your specification Colour: Light grey (similar to RAL 7035) Wall mountable Plug-in slots for PCB ‘s Can be equipped with mounting panels and a DIN Rail for fixing internal equipment Flammability rating: UL 94 V0 Corrosion resistant Supplied with Polychloroprene (CR) Gasket, sunken head lid screws and mounting screws for fixing (Included) IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. PC UL94 V0. One of the most important features of UL94 V0 material is the safety attribute it offers for enclosures near fire and heat. The material classification specifies that the plastic material must be self-extinguishing up to 10 seconds after flame withdrawal and have a glow time no greater than 30 seconds. Also, according to the UL94 V0 classification, it is also imperative that no flaming drops are generated. Compatible Accessories. Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. FAQ's. Can the enclosure be used outside? General purpose enclosures with an IP65 rating are fully waterproof/weatherproof. Does this product have FRI shielding? No, this product does not have FRI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 5,190
USD: 32.29
-
Bopla Euromas II, Polycarbonate Enclosure, IP65, Flanged, 100 x 100 x 57mm 62212000
Euromas II Polycarbonate Enclosures. Introducing a range of polycarbonate enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of polycarbonate and presented in a light grey colour (RAL7035). These general purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits. Polycarbonate general purpose enclosures (UV stabilised) Recyclable Multiple sizes available to meet your specification Colour: Light grey (similar to RAL 7035) Wall mountable Plug-in slots for PCB ‘s Can be equipped with mounting panels and a DIN Rail for fixing internal equipment Flammability rating: UL 94 V0 Corrosion resistant Supplied with Polychloroprene (CR) Gasket, sunken head lid screws and mounting screws for fixing (Included) IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. PC UL94 V0. One of the most important features of UL94 V0 material is the safety attribute it offers for enclosures near fire and heat. The material classification specifies that the plastic material must be self-extinguishing up to 10 seconds after flame withdrawal and have a glow time no greater than 30 seconds. Also, according to the UL94 V0 classification, it is also imperative that no flaming drops are generated. Compatible Accessories. Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. FAQ's. Can the enclosure be used outside? General purpose enclosures with an IP65 rating are fully waterproof/weatherproof. Does this product have FRI shielding? No, this product does not have FRI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 6,160
USD: 38.33
-
Bopla Euromas II, Polycarbonate Enclosure, IP65, Flanged, 160 x 80 x 57mm 62220000
Euromas II Polycarbonate Enclosures. Introducing a range of polycarbonate enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of polycarbonate and presented in a light grey colour (RAL7035). These general purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits. Polycarbonate general purpose enclosures (UV stabilised) Recyclable Multiple sizes available to meet your specification Colour: Light grey (similar to RAL 7035) Wall mountable Plug-in slots for PCB ‘s Can be equipped with mounting panels and a DIN Rail for fixing internal equipment Flammability rating: UL 94 V0 Corrosion resistant Supplied with Polychloroprene (CR) Gasket, sunken head lid screws and mounting screws for fixing (Included) IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. PC UL94 V0. One of the most important features of UL94 V0 material is the safety attribute it offers for enclosures near fire and heat. The material classification specifies that the plastic material must be self-extinguishing up to 10 seconds after flame withdrawal and have a glow time no greater than 30 seconds. Also, according to the UL94 V0 classification, it is also imperative that no flaming drops are generated. Compatible Accessories. Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. FAQ's. Can the enclosure be used outside? General purpose enclosures with an IP65 rating are fully waterproof/weatherproof. Does this product have FRI shielding? No, this product does not have FRI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 7,050
USD: 43.87
-
Bopla Euromas II, Polycarbonate Enclosure, IP65, Flanged, 200 x 120 x 92mm 62237000
Euromas II Polycarbonate Enclosures. Introducing a range of polycarbonate enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of polycarbonate and presented in a light grey colour (RAL7035). These general purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits. Polycarbonate general purpose enclosures (UV stabilised) Recyclable Multiple sizes available to meet your specification Colour: Light grey (similar to RAL 7035) Wall mountable Plug-in slots for PCB ‘s Can be equipped with mounting panels and a DIN Rail for fixing internal equipment Flammability rating: UL 94 V0 Corrosion resistant Supplied with Polychloroprene (CR) Gasket, sunken head lid screws and mounting screws for fixing (Included) IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. PC UL94 V0. One of the most important features of UL94 V0 material is the safety attribute it offers for enclosures near fire and heat. The material classification specifies that the plastic material must be self-extinguishing up to 10 seconds after flame withdrawal and have a glow time no greater than 30 seconds. Also, according to the UL94 V0 classification, it is also imperative that no flaming drops are generated. Compatible Accessories. Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. FAQ's. Can the enclosure be used outside? General purpose enclosures with an IP65 rating are fully waterproof/weatherproof. Does this product have FRI shielding? No, this product does not have FRI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 11,900
USD: 74.04
-
Bopla Euromas II, Polycarbonate Polycarbonate Enclosure, IP65, Flanged, 250 x 160 x 122mm 62241000
Euromas II Polycarbonate Enclosures. Introducing a range of polycarbonate enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of polycarbonate and presented in a light grey colour (RAL7035). These general purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits. Polycarbonate general purpose enclosures (UV stabilised) Recyclable Multiple sizes available to meet your specification Colour: Light grey (similar to RAL 7035) Wall mountable Plug-in slots for PCB ‘s Can be equipped with mounting panels and a DIN Rail for fixing internal equipment Flammability rating: UL 94 V0 Corrosion resistant Supplied with Polychloroprene (CR) Gasket, sunken head lid screws and mounting screws for fixing (Included) IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. PC UL94 V0. One of the most important features of UL94 V0 material is the safety attribute it offers for enclosures near fire and heat. The material classification specifies that the plastic material must be self-extinguishing up to 10 seconds after flame withdrawal and have a glow time no greater than 30 seconds. Also, according to the UL94 V0 classification, it is also imperative that no flaming drops are generated. Compatible Accessories. Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. FAQ's. Can the enclosure be used outside? General purpose enclosures with an IP65 rating are fully waterproof/weatherproof. Does this product have FRI shielding? No, this product does not have FRI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 17,600
USD: 109.51
-
Bopla Euromas II, ABS Enclosure, IP65, Flanged, 98 x 64 x 38mm 63208000
Euromas II ABS Enclosures. Introducing a range of ABS enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of ABS plastic and presented in a light grey colour (RAL7035). These general-purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures? The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits:. ABS general purpose enclosures (UV stabilised) Multiple sizes available to meet your specification Recyclable High impact resistance Colour: Light grey (similar to RAL 7035) Wall mountable Corrosion resistant Flammability rating: UL 94 HB Temperature range: +74 °C IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management Traffic Control IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. Compatible Accessories Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact and water in electrical enclosures. Frequently Asked Questions. Can the enclosure be used outside? General purpose enclosures with an IP65 rating is fully waterproof/weatherproof. Does this product have RFI shielding? No, this product does not have RFI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 4,220
USD: 26.26
-
Bopla Euromas II, ABS Enclosure, IP65, Flanged, 100 x 100 x 57mm 63212000
Euromas II ABS Enclosures. Introducing a range of ABS enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of ABS plastic and presented in a light grey colour (RAL7035). These general-purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures? The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits:. ABS general purpose enclosures (UV stabilised) Multiple sizes available to meet your specification Recyclable High impact resistance Colour: Light grey (similar to RAL 7035) Wall mountable Corrosion resistant Flammability rating: UL 94 HB Temperature range: +74 °C IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management Traffic Control IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. Compatible Accessories Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact and water in electrical enclosures. Frequently Asked Questions. Can the enclosure be used outside? General purpose enclosures with an IP65 rating is fully waterproof/weatherproof. Does this product have RFI shielding? No, this product does not have RFI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 5,230
USD: 32.54
-
Bopla Euromas II, ABS Enclosure, IP65, Flanged, 160 x 80 x 57mm 63220000
Euromas II ABS Enclosures. Introducing a range of ABS enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of ABS plastic and presented in a light grey colour (RAL7035). These general-purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures? The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits:. ABS general purpose enclosures (UV stabilised) Multiple sizes available to meet your specification Recyclable High impact resistance Colour: Light grey (similar to RAL 7035) Wall mountable Corrosion resistant Flammability rating: UL 94 HB Temperature range: +74 °C IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management Traffic Control IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. Compatible Accessories Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact and water in electrical enclosures. Frequently Asked Questions. Can the enclosure be used outside? General purpose enclosures with an IP65 rating is fully waterproof/weatherproof. Does this product have RFI shielding? No, this product does not have RFI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 5,970
USD: 37.15
-
Bopla Euromas II, ABS Enclosure, IP65, Flanged, 200 x 120 x 92mm 63237000
Euromas II ABS Enclosures. Introducing a range of ABS enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of ABS plastic and presented in a light grey colour (RAL7035). These general-purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures? The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits:. ABS general purpose enclosures (UV stabilised) Multiple sizes available to meet your specification Recyclable High impact resistance Colour: Light grey (similar to RAL 7035) Wall mountable Corrosion resistant Flammability rating: UL 94 HB Temperature range: +74 °C IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management Traffic Control IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. Compatible Accessories Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact and water in electrical enclosures. Frequently Asked Questions. Can the enclosure be used outside? General purpose enclosures with an IP65 rating is fully waterproof/weatherproof. Does this product have RFI shielding? No, this product does not have RFI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 10,100
USD: 62.84
-
Bopla Euromas II, ABS Enclosure, IP65, Flanged, 250 x 160 x 122mm 63241000
Euromas II ABS Enclosures. Introducing a range of ABS enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of ABS plastic and presented in a light grey colour (RAL7035). These general-purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures? The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits:. ABS general purpose enclosures (UV stabilised) Multiple sizes available to meet your specification Recyclable High impact resistance Colour: Light grey (similar to RAL 7035) Wall mountable Corrosion resistant Flammability rating: UL 94 HB Temperature range: +74 °C IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management Traffic Control IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. Compatible Accessories Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact and water in electrical enclosures. Frequently Asked Questions. Can the enclosure be used outside? General purpose enclosures with an IP65 rating is fully waterproof/weatherproof. Does this product have RFI shielding? No, this product does not have RFI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 15,600
USD: 97.06
-
Bopla Wall Mount for use with Euromas II 22010000
Euromas Wall Brackets. Bopla Euromas wall brackets for use with Polycarbonate and ABS general purpose enclosures. These brackets enable an enclosure to be fitted securely to a wall. Why would you buy this product? Euromas enclosures are the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components. These brackets offer a wall mount solution both indoor and outdoor for your application. Features and Benefits. ABS, PC (UV stabilised) Screw-on at the rear Colour: Light grey Recyclable Corrosion resistant IP65/ DIN EN 60529 UL 94 V0 Supplied in a bag of 4. Typical Applications. Euromas wall brackets for use with Euromas enclosures.
1 products found
JPY: 2,020
USD: 12.57
-
Bopla, Aluminium, Handheld Enclosure , IP65 ,100 mm x 32 mm x 82 mm 84080100
Black lid seal, screws and screw covers. Bopla Alubos Aluminium Profile Enclosures. Introducing a range of universal hand held enclosures from Bopla. The Alubos range is an excellent choice to house electronics and electrical components, made of aluminium and presented in black similar to (RAL 9005). These handheld enclosure profiles are the ideal choice in enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Alubos series are used by contractors and engineers who require a hand-held enclosure solution with protection for sensitive electrical and electronic components. They have exceptional electromagnetic shielding (EMC), good heat dissipation and IP65 rating. Inside are PCB slots to house your primary components, recessed membrane to support keypads, switches and control systems. Features and Benefits. Hand-held enclosures Material: Aluminium Black powder coated aluminium extrusion Portable and wall mountable Closing Lid; one-piece cover with 1 mm deep recessed membrane area Mounting Lid; two-piece cover with snap-in aluminium panel 1.2 mm thick EMC shielding PCB slots Recessed membrane Good heat dissipation IP 65 DIN EN 60529. Alubos Enclosure Options. ;I>Alubos 800 Enclosure profiles, closed ;/I> External dimension 100 x 82 x 32 mm – RS stock no: ; 298-1529 298-1529 External dimension 150 x 82 x 32 mm – RS stock no: ; 298-1535 298-1535 External dimension 200 x 82 x 32 mm – RS stock no: ; 298-1541 298-1541. ;I>Alubos 1000 Enclosure profiles, closed ;/I> External dimension 100 x 106 x 32 mm– RS stock no: ; 298-1557 298-1557 External dimension 150 x 106 x 32 mm – RS stock no: ; 298-1579 298-1579 External dimension 200 x 106 x 32 mm– RS stock no: ; 298-1585 298-1585. Compatible Accessories. End Covers 84061000 for use with AB 600 enclosure: RS stock no: ; 389-8945 389-8945 84081000 for use with ABD 800 enclosure: RS stock no: ; 298-1591 298-1591 84081000 for use with AB 800 enclosure: RS stock no: ; 397-2116 397-2116 84101000 for use with AB 1000 enclosure: RS stock no: ; 397-2122 397-2122 84101000 for use with AB 1000 enclosure: RS stock no: ; 298-1608 298-1608. Typical Applications. Cable/Wire Management IT/Server Defence Mechanical Processing Aerospace industry Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. FAQ ‘s. What ‘s in the box? Black lid seal, screws and screw covers Are end cover supplied? End covers are available for purchase separately
1 products found
JPY: 5,640
USD: 35.09
-
Bopla, Aluminium, Handheld Enclosure , IP65 ,150 mm x 32 mm x 82 mm 84080150
Black lid seal, screws and screw covers. Bopla Alubos Aluminium Profile Enclosures. Introducing a range of universal hand held enclosures from Bopla. The Alubos range is an excellent choice to house electronics and electrical components, made of aluminium and presented in black similar to (RAL 9005). These handheld enclosure profiles are the ideal choice in enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Alubos series are used by contractors and engineers who require a hand-held enclosure solution with protection for sensitive electrical and electronic components. They have exceptional electromagnetic shielding (EMC), good heat dissipation and IP65 rating. Inside are PCB slots to house your primary components, recessed membrane to support keypads, switches and control systems. Features and Benefits. Hand-held enclosures Material: Aluminium Black powder coated aluminium extrusion Portable and wall mountable Closing Lid; one-piece cover with 1 mm deep recessed membrane area Mounting Lid; two-piece cover with snap-in aluminium panel 1.2 mm thick EMC shielding PCB slots Recessed membrane Good heat dissipation IP 65 DIN EN 60529. Alubos Enclosure Options. ;I>Alubos 800 Enclosure profiles, closed ;/I> External dimension 100 x 82 x 32 mm – RS stock no: ; 298-1529 298-1529 External dimension 150 x 82 x 32 mm – RS stock no: ; 298-1535 298-1535 External dimension 200 x 82 x 32 mm – RS stock no: ; 298-1541 298-1541. ;I>Alubos 1000 Enclosure profiles, closed ;/I> External dimension 100 x 106 x 32 mm– RS stock no: ; 298-1557 298-1557 External dimension 150 x 106 x 32 mm – RS stock no: ; 298-1579 298-1579 External dimension 200 x 106 x 32 mm– RS stock no: ; 298-1585 298-1585. Compatible Accessories. End Covers 84061000 for use with AB 600 enclosure: RS stock no: ; 389-8945 389-8945 84081000 for use with ABD 800 enclosure: RS stock no: ; 298-1591 298-1591 84081000 for use with AB 800 enclosure: RS stock no: ; 397-2116 397-2116 84101000 for use with AB 1000 enclosure: RS stock no: ; 397-2122 397-2122 84101000 for use with AB 1000 enclosure: RS stock no: ; 298-1608 298-1608. Typical Applications. Cable/Wire Management IT/Server Defence Mechanical Processing Aerospace industry Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. FAQ ‘s. What ‘s in the box? Black lid seal, screws and screw covers Are end cover supplied? End covers are available for purchase separately
1 products found
JPY: 8,470
USD: 52.70
-
Bopla, Aluminium, Handheld Enclosure , IP65 ,200 mm x 32 mm x 82 mm 84080200
Black lid seal, screws and screw covers. Bopla Alubos Aluminium Profile Enclosures. Introducing a range of universal hand held enclosures from Bopla. The Alubos range is an excellent choice to house electronics and electrical components, made of aluminium and presented in black similar to (RAL 9005). These handheld enclosure profiles are the ideal choice in enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Alubos series are used by contractors and engineers who require a hand-held enclosure solution with protection for sensitive electrical and electronic components. They have exceptional electromagnetic shielding (EMC), good heat dissipation and IP65 rating. Inside are PCB slots to house your primary components, recessed membrane to support keypads, switches and control systems. Features and Benefits. Hand-held enclosures Material: Aluminium Black powder coated aluminium extrusion Portable and wall mountable Closing Lid; one-piece cover with 1 mm deep recessed membrane area Mounting Lid; two-piece cover with snap-in aluminium panel 1.2 mm thick EMC shielding PCB slots Recessed membrane Good heat dissipation IP 65 DIN EN 60529. Alubos Enclosure Options. ;I>Alubos 800 Enclosure profiles, closed ;/I> External dimension 100 x 82 x 32 mm – RS stock no: ; 298-1529 298-1529 External dimension 150 x 82 x 32 mm – RS stock no: ; 298-1535 298-1535 External dimension 200 x 82 x 32 mm – RS stock no: ; 298-1541 298-1541. ;I>Alubos 1000 Enclosure profiles, closed ;/I> External dimension 100 x 106 x 32 mm– RS stock no: ; 298-1557 298-1557 External dimension 150 x 106 x 32 mm – RS stock no: ; 298-1579 298-1579 External dimension 200 x 106 x 32 mm– RS stock no: ; 298-1585 298-1585. Compatible Accessories. End Covers 84061000 for use with AB 600 enclosure: RS stock no: ; 389-8945 389-8945 84081000 for use with ABD 800 enclosure: RS stock no: ; 298-1591 298-1591 84081000 for use with AB 800 enclosure: RS stock no: ; 397-2116 397-2116 84101000 for use with AB 1000 enclosure: RS stock no: ; 397-2122 397-2122 84101000 for use with AB 1000 enclosure: RS stock no: ; 298-1608 298-1608. Typical Applications. Cable/Wire Management IT/Server Defence Mechanical Processing Aerospace industry Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. FAQ ‘s. What ‘s in the box? Black lid seal, screws and screw covers Are end cover supplied? End covers are available for purchase separately
1 products found
JPY: 11,400
USD: 70.93
-
Bopla, Aluminium, Handheld Enclosure , IP65 ,100 mm x 32 mm x 106 mm 84100100
Black lid seal, screws and screw covers. Bopla Alubos Aluminium Profile Enclosures. Introducing a range of universal hand held enclosures from Bopla. The Alubos range is an excellent choice to house electronics and electrical components, made of aluminium and presented in black similar to (RAL 9005). These handheld enclosure profiles are the ideal choice in enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Alubos series are used by contractors and engineers who require a hand-held enclosure solution with protection for sensitive electrical and electronic components. They have exceptional electromagnetic shielding (EMC), good heat dissipation and IP65 rating. Inside are PCB slots to house your primary components, recessed membrane to support keypads, switches and control systems. Features and Benefits. Hand-held enclosures Material: Aluminium Black powder coated aluminium extrusion Portable and wall mountable Closing Lid; one-piece cover with 1 mm deep recessed membrane area Mounting Lid; two-piece cover with snap-in aluminium panel 1.2 mm thick EMC shielding PCB slots Recessed membrane Good heat dissipation IP 65 DIN EN 60529. Alubos Enclosure Options. ;I>Alubos 800 Enclosure profiles, closed ;/I> External dimension 100 x 82 x 32 mm – RS stock no: ; 298-1529 298-1529 External dimension 150 x 82 x 32 mm – RS stock no: ; 298-1535 298-1535 External dimension 200 x 82 x 32 mm – RS stock no: ; 298-1541 298-1541. ;I>Alubos 1000 Enclosure profiles, closed ;/I> External dimension 100 x 106 x 32 mm– RS stock no: ; 298-1557 298-1557 External dimension 150 x 106 x 32 mm – RS stock no: ; 298-1579 298-1579 External dimension 200 x 106 x 32 mm– RS stock no: ; 298-1585 298-1585. Compatible Accessories. End Covers 84061000 for use with AB 600 enclosure: RS stock no: ; 389-8945 389-8945 84081000 for use with ABD 800 enclosure: RS stock no: ; 298-1591 298-1591 84081000 for use with AB 800 enclosure: RS stock no: ; 397-2116 397-2116 84101000 for use with AB 1000 enclosure: RS stock no: ; 397-2122 397-2122 84101000 for use with AB 1000 enclosure: RS stock no: ; 298-1608 298-1608. Typical Applications. Cable/Wire Management IT/Server Defence Mechanical Processing Aerospace industry Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. FAQ ‘s. What ‘s in the box? Black lid seal, screws and screw covers Are end cover supplied? End covers are available for purchase separately
1 products found
JPY: 5,950
USD: 37.02
-
Bopla, Aluminium, Handheld Enclosure , IP65 ,150 mm x 32 mm x 106 mm 84100150
Black lid seal, screws and screw covers. Bopla Alubos Aluminium Profile Enclosures. Introducing a range of universal hand held enclosures from Bopla. The Alubos range is an excellent choice to house electronics and electrical components, made of aluminium and presented in black similar to (RAL 9005). These handheld enclosure profiles are the ideal choice in enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Alubos series are used by contractors and engineers who require a hand-held enclosure solution with protection for sensitive electrical and electronic components. They have exceptional electromagnetic shielding (EMC), good heat dissipation and IP65 rating. Inside are PCB slots to house your primary components, recessed membrane to support keypads, switches and control systems. Features and Benefits. Hand-held enclosures Material: Aluminium Black powder coated aluminium extrusion Portable and wall mountable Closing Lid; one-piece cover with 1 mm deep recessed membrane area Mounting Lid; two-piece cover with snap-in aluminium panel 1.2 mm thick EMC shielding PCB slots Recessed membrane Good heat dissipation IP 65 DIN EN 60529. Alubos Enclosure Options. ;I>Alubos 800 Enclosure profiles, closed ;/I> External dimension 100 x 82 x 32 mm – RS stock no: ; 298-1529 298-1529 External dimension 150 x 82 x 32 mm – RS stock no: ; 298-1535 298-1535 External dimension 200 x 82 x 32 mm – RS stock no: ; 298-1541 298-1541. ;I>Alubos 1000 Enclosure profiles, closed ;/I> External dimension 100 x 106 x 32 mm– RS stock no: ; 298-1557 298-1557 External dimension 150 x 106 x 32 mm – RS stock no: ; 298-1579 298-1579 External dimension 200 x 106 x 32 mm– RS stock no: ; 298-1585 298-1585. Compatible Accessories. End Covers 84061000 for use with AB 600 enclosure: RS stock no: ; 389-8945 389-8945 84081000 for use with ABD 800 enclosure: RS stock no: ; 298-1591 298-1591 84081000 for use with AB 800 enclosure: RS stock no: ; 397-2116 397-2116 84101000 for use with AB 1000 enclosure: RS stock no: ; 397-2122 397-2122 84101000 for use with AB 1000 enclosure: RS stock no: ; 298-1608 298-1608. Typical Applications. Cable/Wire Management IT/Server Defence Mechanical Processing Aerospace industry Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. FAQ ‘s. What ‘s in the box? Black lid seal, screws and screw covers Are end cover supplied? End covers are available for purchase separately
1 products found
JPY: 8,970
USD: 55.81
-
Bopla, Aluminium, Handheld Enclosure , IP65 ,200 mm x 32 mm x 106 mm 84100200
Black lid seal, screws and screw covers. Bopla Alubos Aluminium Profile Enclosures. Introducing a range of universal hand held enclosures from Bopla. The Alubos range is an excellent choice to house electronics and electrical components, made of aluminium and presented in black similar to (RAL 9005). These handheld enclosure profiles are the ideal choice in enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Alubos series are used by contractors and engineers who require a hand-held enclosure solution with protection for sensitive electrical and electronic components. They have exceptional electromagnetic shielding (EMC), good heat dissipation and IP65 rating. Inside are PCB slots to house your primary components, recessed membrane to support keypads, switches and control systems. Features and Benefits. Hand-held enclosures Material: Aluminium Black powder coated aluminium extrusion Portable and wall mountable Closing Lid; one-piece cover with 1 mm deep recessed membrane area Mounting Lid; two-piece cover with snap-in aluminium panel 1.2 mm thick EMC shielding PCB slots Recessed membrane Good heat dissipation IP 65 DIN EN 60529. Alubos Enclosure Options. ;I>Alubos 800 Enclosure profiles, closed ;/I> External dimension 100 x 82 x 32 mm – RS stock no: ; 298-1529 298-1529 External dimension 150 x 82 x 32 mm – RS stock no: ; 298-1535 298-1535 External dimension 200 x 82 x 32 mm – RS stock no: ; 298-1541 298-1541. ;I>Alubos 1000 Enclosure profiles, closed ;/I> External dimension 100 x 106 x 32 mm– RS stock no: ; 298-1557 298-1557 External dimension 150 x 106 x 32 mm – RS stock no: ; 298-1579 298-1579 External dimension 200 x 106 x 32 mm– RS stock no: ; 298-1585 298-1585. Compatible Accessories. End Covers 84061000 for use with AB 600 enclosure: RS stock no: ; 389-8945 389-8945 84081000 for use with ABD 800 enclosure: RS stock no: ; 298-1591 298-1591 84081000 for use with AB 800 enclosure: RS stock no: ; 397-2116 397-2116 84101000 for use with AB 1000 enclosure: RS stock no: ; 397-2122 397-2122 84101000 for use with AB 1000 enclosure: RS stock no: ; 298-1608 298-1608. Typical Applications. Cable/Wire Management IT/Server Defence Mechanical Processing Aerospace industry Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. FAQ ‘s. What ‘s in the box? Black lid seal, screws and screw covers Are end cover supplied? End covers are available for purchase separately
1 products found
JPY: 12,300
USD: 76.53
-
Bopla 7 x 84.6 x 34.6mm End Panel for use with Alubos 800 Enclosure 84081000
Bopla ABD Series End Covers. A series of end covers for Alubos universal aluminium profile enclosures. These covers have a recessed area for front membranes or membrane keypads. Features and Benefits. Diecast aluminium Black, similar to RAL 9005 EMC shielding IP65. End Cover Application. 84061000 for use with AB 600 enclosure : RS stock no: ; 389-8945 389-8945 84081000 for use with ABD 800 enclosure : RS stock no: ; 298-1591 298-1591 84081000 for use with AB 800 enclosure : RS stock no: ; 397-2116 397-2116 84101000 for use with AB 1000 enclosure : RS stock no: ; 397-2122 397-2122 84101000 for use with AB 1000 enclosure : RS stock no: ; 298-1608 298-1608. What ‘s in the box?. Lid, black seal, screws, black screw covers
1 products found
JPY: 2,910
USD: 18.11
-
Bopla 7 x 108.6 x 34.6mm End Panel for use with Alubos 1000 Enclosure 84101000
Bopla ABD Series End Covers. A series of end covers for Alubos universal aluminium profile enclosures. These covers have a recessed area for front membranes or membrane keypads. Features and Benefits. Diecast aluminium Black, similar to RAL 9005 EMC shielding IP65. End Cover Application. 84061000 for use with AB 600 enclosure : RS stock no: ; 389-8945 389-8945 84081000 for use with ABD 800 enclosure : RS stock no: ; 298-1591 298-1591 84081000 for use with AB 800 enclosure : RS stock no: ; 397-2116 397-2116 84101000 for use with AB 1000 enclosure : RS stock no: ; 397-2122 397-2122 84101000 for use with AB 1000 enclosure : RS stock no: ; 298-1608 298-1608. What ‘s in the box?. Lid, black seal, screws, black screw covers
1 products found
JPY: 3,170
USD: 19.72
-
Bopla Euromas II, Polycarbonate Enclosure, IP65, Flanged, 65 x 50 x 37mm 62206000
Euromas II Polycarbonate Enclosures. Introducing a range of polycarbonate enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of polycarbonate and presented in a light grey colour (RAL7035). These general purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits. Polycarbonate general purpose enclosures (UV stabilised) Recyclable Multiple sizes available to meet your specification Colour: Light grey (similar to RAL 7035) Wall mountable Plug-in slots for PCB ‘s Can be equipped with mounting panels and a DIN Rail for fixing internal equipment Flammability rating: UL 94 V0 Corrosion resistant Supplied with Polychloroprene (CR) Gasket, sunken head lid screws and mounting screws for fixing (Included) IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. PC UL94 V0. One of the most important features of UL94 V0 material is the safety attribute it offers for enclosures near fire and heat. The material classification specifies that the plastic material must be self-extinguishing up to 10 seconds after flame withdrawal and have a glow time no greater than 30 seconds. Also, according to the UL94 V0 classification, it is also imperative that no flaming drops are generated. Compatible Accessories. Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. FAQ's. Can the enclosure be used outside? General purpose enclosures with an IP65 rating are fully waterproof/weatherproof. Does this product have FRI shielding? No, this product does not have FRI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 3,830
USD: 23.83
-
Bopla Euromas II, Polycarbonate Enclosure, IP65, Flanged, 82 x 80 x 57mm 62210000
Euromas II Polycarbonate Enclosures. Introducing a range of polycarbonate enclosures from Bopla. The Euromas II range is an excellent choice to house electronic and electrical components, made of polycarbonate and presented in a light grey colour (RAL7035). These general purpose enclosures are the ideal solution for all your enclosure protection both indoors and outdoors. Why would you buy these enclosures?. The Euromas II series is the ideal solution for contractors and engineers who require protection for sensitive electrical and electronic components both indoor and outdoor. Our range offers multiple sizes and a choice of IP ratings to suit your needs. Features and Benefits. Polycarbonate general purpose enclosures (UV stabilised) Recyclable Multiple sizes available to meet your specification Colour: Light grey (similar to RAL 7035) Wall mountable Plug-in slots for PCB ‘s Can be equipped with mounting panels and a DIN Rail for fixing internal equipment Flammability rating: UL 94 V0 Corrosion resistant Supplied with Polychloroprene (CR) Gasket, sunken head lid screws and mounting screws for fixing (Included) IP65 / DIN EN 60529. Typical Applications. Cable/Wire Management IT/Server Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. PC UL94 V0. One of the most important features of UL94 V0 material is the safety attribute it offers for enclosures near fire and heat. The material classification specifies that the plastic material must be self-extinguishing up to 10 seconds after flame withdrawal and have a glow time no greater than 30 seconds. Also, according to the UL94 V0 classification, it is also imperative that no flaming drops are generated. Compatible Accessories. Bopla wall bracket for Euromas II; RS stock no: ; 266-3647 266-3647. FAQ's. Can the enclosure be used outside? General purpose enclosures with an IP65 rating are fully waterproof/weatherproof. Does this product have FRI shielding? No, this product does not have FRI shielding What is supplied? Lid and Base, self-tapping coarse-pitch thread lid screws made of V2A
1 products found
JPY: 5,420
USD: 33.72
