【[$1]Bergquist[/$1]】Electronics Heating & Cooling
現在の絞り込み条件
-
Thermal Interface Pad, Acrylic, 0.6W/m·K, 40.64 x 40.64mm 0.127mm, Self-Adhesive CPUPAD40.64X40.64
CPU Pad insulators for PGA. Electrical insulators and thermal conductors. Designed for fixing PGA type coolers on to microprocessors. The CPU pad is self-adhesive on both sides.
1種類の製品があります
JPY: 13,200
USD: 82.13
-
Thermal Interface Pad, Acrylic, 0.6W/m·K, 35 x 35mm 0.127mm, Self-Adhesive CPU PAD 35X35
CPU Pad insulators for PGA. Electrical insulators and thermal conductors. Designed for fixing PGA type coolers on to microprocessors. The CPU pad is self-adhesive on both sides.
1種類の製品があります
JPY: 8,130
USD: 50.59
-
Thermal Interface Pad, Fibreglass, 3.5W/m·K, 41.91 x 28.96mm 0.015in SP2000-0.015-00-05
Bergquist Sil-Pad 2000. Bergquist Sil-Pad 2000 is a high performance, thermally conductive insulator designed for demanding military/aerospace and other commercial applications. Sil-Pad 2000 is a grease-free, conformable material capable of meetingor exceeding both the thermal and electrical requirements of high-reliability electronic packaging applications. High-performance insulators, thermo-conductive and ultra reliable Intended for highly demanding military and aerospace applications Comply with military standards in their applications Boron nitride reinforced silicon elastomer The Sil-Pad 2000 is an insulator designed to maximise thermal and dielectric performance
1種類の製品があります
JPY: 17,500
USD: 108.89
-
Thermal Interface Pad, Thin Film Polyimide, 0.9W/m·K, 19.05 x 12.7mm 0.152mm SPK4-0.006-00-54
Sil-Pad K4 insulators. These combine the thermal transfer properties of the Sil-Pad rubber with the high dielectric strength and excellent physical resistance of Kapton MT film. Electrical insulators and thermal conductors. Durable insulators. Resistant to high voltages and do not require thermal grease to provide heat transfer.
1種類の製品があります
JPY: 4,080
USD: 25.39
-
Thermal Interface Pad, Thin Film Polyimide, 0.9W/m·K, 19.05 x 12.7mm 0.152mm, Self-Adhesive SPK4-0.006-AC-54
Sil-Pad K4 insulators. These combine the thermal transfer properties of the Sil-Pad rubber with the high dielectric strength and excellent physical resistance of Kapton MT film. Electrical insulators and thermal conductors. Durable insulators. Resistant to high voltages and do not require thermal grease to provide heat transfer.
1種類の製品があります
JPY: 12,600
USD: 78.40
-
Thermal Interface Pad, Thin Film Polyimide, 1.3W/m·K, 11.1 x 7.92mm 0.152mm, Self-Adhesive SPK10-0.006-AC-50
Sil-Pad K10 insulators. High-performance insulators, which combine Kapton MT type polyamide film with the boron nitride reinforced silicon elastomer. Electrical insulators and thermal conductors. These replace ceramic insulators used when mechanical resistance is required. Overcomes the risks of breaking. Very good electrical insulation behaviour.
1種類の製品があります
JPY: 6,840
USD: 42.56
-
Thermal Interface Sheet, Gap Pad VO, 0.8W/m·K, 8 x 16in 0.04in GPVO-0.040-00-0816
GAP Pad® VO. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available (0.5, 1, 2 and 3 mm) mean that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 36,400
USD: 226.48
-
Thermal Interface Sheet, Gap Pad VO, 0.8W/m·K, 200 x 100mm 0.04in GPVO-0.040-00-00-200X100
GAP Pad® VO. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available (0.5, 1, 2 and 3 mm) mean that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 11,400
USD: 70.93
-
Thermal Interface Sheet, Gap Pad VO, 0.8W/m·K, 200 x 100mm 0.04in, Self-Adhesive GPVO-0.040-AC-00-200X100
GAP Pad Vo®/GAP Pad Vo® Ultra Soft and GAP Pad 2000 thermal joints. Electrical insulators and thermal conductors. Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies. The material has excellent elasticity. The thicknesses available (0.5; 1; 2; 3 and 4 mm) mean that GAP Pads can be used when the texture of the surface varies. The Ultra Soft range has the same characteristics but is softer and more malleable. The GAP Pad 2000 range has better thermal conductivity with 2 W/mk. The pressure-sensitive adhesive on one side ensures excellent surface grip. GAP Pad products in 200 x 100 mm sizes are available in standard or adhesive versions (AC).
1種類の製品があります
JPY: 12,000
USD: 74.66
-
Thermal Interface Sheet, Gap Pad VO, 0.8W/m·K, 200 x 100mm 0.08in GPVO-0.080-00-00-200X100
GAP Pad® VO. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available (0.5, 1, 2 and 3 mm) mean that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 14,700
USD: 91.46
-
Thermal Interface Sheet, Gap Pad VO, 0.8W/m·K, 200 x 100mm 0.125in GPVO-0.125-00-00-200X100
GAP Pad® VO. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available (0.5, 1, 2 and 3 mm) mean that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 25,100
USD: 156.17
-
Thermal Interface Sheet, Gap Pad VO, 0.8W/m·K, 200 x 100mm 0.16in, Self-Adhesive GPVO-0.160-AC-00-200X100
GAP Pad Vo®/GAP Pad Vo® Ultra Soft and GAP Pad 2000 thermal joints. Electrical insulators and thermal conductors. Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies. The material has excellent elasticity. The thicknesses available (0.5; 1; 2; 3 and 4 mm) mean that GAP Pads can be used when the texture of the surface varies. The Ultra Soft range has the same characteristics but is softer and more malleable. The GAP Pad 2000 range has better thermal conductivity with 2 W/mk. The pressure-sensitive adhesive on one side ensures excellent surface grip. GAP Pad products in 200 x 100 mm sizes are available in standard or adhesive versions (AC).
1種類の製品があります
JPY: 36,600
USD: 227.73
-
Thermal Interface Sheet, Gap Pad VO Ultra Soft, 1W/m·K, 406 x 203mm 0.04in GPVOUS-0.040-00-0816
GAP Pad® VO Ultra Soft. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available means that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 48,700
USD: 303.01
-
Thermal Interface Sheet, Gap Pad VO Ultra Soft, 1W/m·K, 406 x 203 mm, 408 x 203 mm 0.125in GPVOUS-0.125-00-0816
GAP Pad® VO Ultra Soft. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available means that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 81,700
USD: 508.34
-
Thermal Interface Sheet, Gap Pad VO Ultra Soft, 1W/m·K, 200 x 100mm 0.02in, Self-Adhesive GPVOUS-0.020-AC-00-200X100
GAP Pad Vo®/GAP Pad Vo® Ultra Soft and GAP Pad 2000 thermal joints. Electrical insulators and thermal conductors. Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies. The material has excellent elasticity. The thicknesses available (0.5; 1; 2; 3 and 4 mm) mean that GAP Pads can be used when the texture of the surface varies. The Ultra Soft range has the same characteristics but is softer and more malleable. The GAP Pad 2000 range has better thermal conductivity with 2 W/mk. The pressure-sensitive adhesive on one side ensures excellent surface grip. GAP Pad products in 200 x 100 mm sizes are available in standard or adhesive versions (AC).
1種類の製品があります
JPY: 15,100
USD: 93.95
-
Thermal Interface Sheet, Gap Pad VO Ultra Soft, 1W/m·K, 200 x 100mm 0.04in GPVOUS-0.040-00-0816
GAP Pad® VO Ultra Soft. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available means that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 12,900
USD: 80.26
-
Thermal Interface Sheet, Gap Pad VO Ultra Soft, 1W/m·K, 200 x 100mm 0.08in, Self-Adhesive GPVOUS-0.080-AC-00-200X100
GAP Pad Vo®/GAP Pad Vo® Ultra Soft and GAP Pad 2000 thermal joints. Electrical insulators and thermal conductors. Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies. The material has excellent elasticity. The thicknesses available (0.5; 1; 2; 3 and 4 mm) mean that GAP Pads can be used when the texture of the surface varies. The Ultra Soft range has the same characteristics but is softer and more malleable. The GAP Pad 2000 range has better thermal conductivity with 2 W/mk. The pressure-sensitive adhesive on one side ensures excellent surface grip. GAP Pad products in 200 x 100 mm sizes are available in standard or adhesive versions (AC).
1種類の製品があります
JPY: 28,300
USD: 176.08
-
Thermal Interface Sheet, Gap Pad VO Ultra Soft, 1W/m·K, 100 x 100mm 0.125in GPVOUS-0.125-00-00-100X100
GAP Pad® VO Ultra Soft. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available means that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 12,800
USD: 79.64
-
Thermal Interface Sheet, Gap Pad VO Ultra Soft, 1W/m·K, 100 x 100mm 0.2in GPVOUS-0.200-00-00-100X100
GAP Pad® VO Ultra Soft. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available means that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 20,700
USD: 128.80
-
Thermal Interface Sheet, Gap Pad 2000S40, 2W/m·K, 200 x 100mm 0.02in, Self-Adhesive GP2000S40-0.020-02-00-200x100
GAP Pad® 2000 Thermal Joints. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available (0.5, 1, 2, 3 and 4 mm) mean that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 7,050
USD: 43.87
-
Thermal Interface Pad, Fibreglass, 0.9W/m·K, 11.1 x 7.92mm 0.178mm SP400-0.007-00-50
Sil-Pad 400 Insulators. The Sil-Pad 400s are silicon rubber and fibreglass-based insulators This flame retardant material is designed to act as a thermo-conductive insulator They have excellent mechanical and physical characteristics They are resistant to cleaning products The fibreglass reinforcement provides excellent resistance to perforation The pliable surfaces provide a perfect surface contact as well as excellent thermal dissipation The Sil-Pad 400s are non-toxic Applications: used as an insulator between power devices and heatsinks
1種類の製品があります
JPY: 3,290
USD: 20.47
-
Thermal Interface Pad, Q-Pad II, 2.5W/m·K, 19.05 x 12.7mm 0.152mm, Self-Adhesive QII-0.006-AC-54
Q-Pad II insulators. Q-Pad Q2 insulators are made up of a 25 μm aluminium sheet, coated on both sides with a 65 μm thermo-conductive layer. Thermal conductors. They overcome problems associated with grease, including contamination of fusion welds and cleaning operations. Available in dry or self-adhesive models. They are intended for applications not requiring any electrical insulation. They prevent deposits of dust often likely to cause short-circuits or heat accumulations. Zero electrical insulation. Directly replaces silicone grease.
1種類の製品があります
JPY: 15,800
USD: 98.31
-
Thermal Interface Sheet, Fibreglass, 1.6W/m·K, 12 x 12in 0.127mm, Self-Adhesive SP800-0.005-AC-1212
Sil-Pad insulators - series 800-S. Sheets on which heat-emitting power semi-conductors can be mounted directly with complete safety. This material is specially reserved for applications in which pressure between the transistor and the radiator is low. Available in dry or self-adhesive model (SIL-Pad 800-S AC).
1種類の製品があります
JPY: 7,130
USD: 44.36
-
Heatsink Heatsink Mixing Nozzle for use with Insulators MIXING NOZZLE 50CC
GAP FILLER and liquid filler, electrical insulator and thermal conductor. In some applications, the GAP Pad exerts a pressure unable to cope with risks of deterioration. For other applications, it is impossible to apply due to inaccessibility. To solve these problems, Bergquist has created a "GAP Pad liquid", thermal filler and thermal insulator product called "GAP FILLER". Liquid filler. Electrical insulators and thermal conductors.
1種類の製品があります
JPY: 1,280
USD: 7.96
-
Thermal Interface Sheet, Gap Pad VO Ultra Soft, 1W/m·K, 200 x 100mm 0.04in, Self-Adhesive GPVOUS-0.040-AC-00-200X100
GAP Pad Vo®/GAP Pad Vo® Ultra Soft and GAP Pad 2000 thermal joints. Electrical insulators and thermal conductors. Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies. The material has excellent elasticity. The thicknesses available (0.5; 1; 2; 3 and 4 mm) mean that GAP Pads can be used when the texture of the surface varies. The Ultra Soft range has the same characteristics but is softer and more malleable. The GAP Pad 2000 range has better thermal conductivity with 2 W/mk. The pressure-sensitive adhesive on one side ensures excellent surface grip. GAP Pad products in 200 x 100 mm sizes are available in standard or adhesive versions (AC).
1種類の製品があります
JPY: 20,000
USD: 124.44
-
Thermal Interface Sheet, Gap Pad VO Ultra Soft, 1W/m·K, 100 x 100mm 0.04in GPVOUS-0.040-00-00-100X100
GAP Pad® VO Ultra Soft. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available means that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 7,590
USD: 47.23
-
Thermal Interface Sheet, Fibreglass, 3.5W/m·K, 150 x 150mm 0.015in SP2000-0.015-00-00-150X150
Sil-Pad® 2000. High performance, high reliability. A composite of silicone rubber and fibreglass Electrically isolating material White colour Flame retardant
1種類の製品があります
JPY: 40,900
USD: 254.48
-
Thermal Interface Sheet, Gap Pad 2000S40, 2W/m·K, 100 x 100mm 0.04in, Self-Adhesive GP2000S40-0.040-02-00-100X100
Gap Pad® 2000S40. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available mean that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 7,940
USD: 49.40
-
Thermal Interface Sheet, Gap Pad 3000S30, 3W/m·K, 100 x 100mm 0.04in, Self-Adhesive GP3000S30-0.040-02-00-100X100
Gap Pad® 3000S30. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available means that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable The GAP Pad XX00S series is designed for low pressure and stress applications
1種類の製品があります
JPY: 10,900
USD: 67.82
-
Thermal Interface Sheet, Gap Pad 5000S35, 5W/m·K, 4 x 4in 0.02in, Self-Adhesive GP5000S35-0.020-02-0404
Gap Pad® 5000S35. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available means that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable
1種類の製品があります
JPY: 11,000
USD: 68.44
-
Thermal Interface Sheet, Gap Pad 5000S35, 5W/m·K, 4 x 4in 0.04in, Self-Adhesive GP5000S35-0.040-02-0404
Gap Pad® 5000S35. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available means that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable
1種類の製品があります
JPY: 13,200
USD: 82.13
-
Thermal Interface Sheet, Gap Pad 5000S35, 5W/m·K, 4 x 4in 0.1in, Self-Adhesive GP5000S35-0.100-02-0404
Gap Pad® 5000S35. Electrical insulators and thermal conductors Adapted for electrical insulation and as thermal joints on assemblies of components where the height varies The material has excellent elasticity The thicknesses available means that GAP Pads can be used when the texture of the surface varies The Ultra Soft range has the same characteristics but is softer and more malleable
1種類の製品があります
JPY: 20,500
USD: 127.55
-
Thermal Interface Pad, Fibreglass, 0.9W/m·K 0.178mm SP400-0.007-00-21
Sil-Pad 400 Insulators. The Sil-Pad 400s are silicon rubber and fibreglass-based insulators This flame retardant material is designed to act as a thermo-conductive insulator They have excellent mechanical and physical characteristics They are resistant to cleaning products The fibreglass reinforcement provides excellent resistance to perforation The pliable surfaces provide a perfect surface contact as well as excellent thermal dissipation The Sil-Pad 400s are non-toxic Applications: used as an insulator between power devices and heatsinks
1種類の製品があります
JPY: 42,000
USD: 261.32
-
Thermal Interface Pad, Fibreglass, 0.9W/m·K, 21.97 x 16.51mm 0.178mm, Self-Adhesive SP400-0.007-AC-53
Sil-Pad 400 Insulators. The Sil-Pad 400s are silicon rubber and fibreglass-based insulators This flame retardant material is designed to act as a thermo-conductive insulator They have excellent mechanical and physical characteristics They are resistant to cleaning products The fibreglass reinforcement provides excellent resistance to perforation The pliable surfaces provide a perfect surface contact as well as excellent thermal dissipation The Sil-Pad 400s are non-toxic Applications: used as an insulator between power devices and heatsinks
1種類の製品があります
JPY: 5,280
USD: 32.85
-
Thermal Interface Sheet, Fibreglass, 0.9W/m·K, 12 x 12in 0.178mm, Self-Adhesive SP400-0.007-AC-1212
Insulator sheets. Sheets on which heat-emitting power semi-conductors can be mounted directly with complete safety. Conduct heat. Insulate electrically. Available in dry or self-adhesive SILPAD400, QPAD, and 2000 models.
1種類の製品があります
JPY: 11,600
USD: 72.18
-
Thermal Interface Sheet, Q-Pad II, 2.5W/m·K, 12 x 12in 0.152mm QII-0.006-00-1212
Insulator sheets. Sheets on which heat-emitting power semi-conductors can be mounted directly with complete safety. Conduct heat. Insulate electrically. Available in dry or self-adhesive SILPAD400, QPAD, and 2000 models.
1種類の製品があります
JPY: 6,710
USD: 41.75
-
Thermal Interface Sheet, Q-Pad II, 2.5W/m·K, 12 x 12in 0.152mm, Self-Adhesive QII-0.006-AC-1212
Insulator sheets. Sheets on which heat-emitting power semi-conductors can be mounted directly with complete safety. Conduct heat. Insulate electrically. Available in dry or self-adhesive SILPAD400, QPAD, and 2000 models.
1種類の製品があります
JPY: 21,500
USD: 133.77
-
Thermal Interface Pad, Fibreglass, 0.9W/m·K, 28.96 x 20.57mm 0.178mm, Self-Adhesive SP400-0.007-AC-122
Sil-Pad 400 Insulators. The Sil-Pad 400s are silicon rubber and fibreglass-based insulators This flame retardant material is designed to act as a thermo-conductive insulator They have excellent mechanical and physical characteristics They are resistant to cleaning products The fibreglass reinforcement provides excellent resistance to perforation The pliable surfaces provide a perfect surface contact as well as excellent thermal dissipation The Sil-Pad 400s are non-toxic Applications: used as an insulator between power devices and heatsinks
1種類の製品があります
JPY: 9,700
USD: 60.35
-
Thermal Interface Sheet, Fibreglass, 1.6W/m·K, 12 x 12in 0.127mm SP800-0.005-00-1212
Sil-Pad insulators - series 800-S. Sheets on which heat-emitting power semi-conductors can be mounted directly with complete safety. This material is specially reserved for applications in which pressure between the transistor and the radiator is low. Available in dry or self-adhesive model (SIL-Pad 800-S AC).
1種類の製品があります
JPY: 8,480
USD: 52.76
-
Heatsink Hi-Flow Insulator for use with Heatsink HF105-0.005-00-1212
Hi-Flow 105. Designed to replace grease as a thermal interface Easy to handle in the manufacturing environment Tack free and scratch resistant Flame rating UL 94 V-0. Flexible aluminium carrier with thermal conductive wax Thermal impedance 0.37ºC-in 2 /W @ 25 psi Electrically conductive Colour Dark Grey
1種類の製品があります
JPY: 19,300
USD: 120.09
