[Lascar]Electronic/Electrical Parts and Controll Equipments
Filters
-
Lascar B Series Digital Voltmeter DC, E -paper Dot Matrix Display 6-Digits SGD 21-B
1 products found
JPY: 17,500
USD: 109.70
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±1 %, 45 x 22.2 mm DPM 125-BL
snap-in bezel and window. 12.5mm, 3.5 Digit, Low Power. Low battery power indication Logic selectable decimal point Digital hold version (stock no. < 260-268') 260-268 LED backlit version (stock no. < 307-6375') 307-6375 Backlight voltage; 7.5V to 10V, backlight current; 60mA max. Extra large display in a miniature package Plugs directly into a 12-pin 0.1in pitch single in line socket Functions as ammeter when used with a 200mV digital current shunt Temperature stability zero drift 100 ppm/°C 7.5 - 14 Vdc operating voltage range
1 products found
JPY: 17,200
USD: 107.82
-
Lascar Digital Voltmeter AC, LCD Display 3.5-Digits ±2 %, 72 x 40 mm DPM 970
19mm, 3.5 Digit AC Meter. Panel mounted Backlight function (current 50mA) Frequency range input voltage: 15kHz Auto-zero, auto-polarity Screw terminal connection Dividing bridge measurement of voltage and current at ac voltage and current terminals External scale resistors required for voltage measurement above 500Vrms
1 products found
JPY: 28,900
USD: 181.16
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±1 %, 62 x 32 mm DPM 702S
6.4mm, 3 Digit Dual Channel Meter. Adjustable annunciators For applications where two readings e.g. current/voltage or temperature/humidity are required Auto-zero, auto-polarity Selectable decimal points Single rail input Input leakage current; 1pA (typ.), 10pA (max.) Plugs directly into a 10-pin single in line socket Integral carrier and window, with separate mounting bezel Temperature stability zero drift 100 ppm/°C 3.5 - 7 Vdc operating voltage range
1 products found
JPY: 21,100
USD: 132.26
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±1 %, 44 x 21 mm EMV 1125
LCD Voltmeter with Single-Hole Mounting. Fixed decimal point Auto-zero, auto-polarity Low battery power warning Connection via 10 wires fed through hollow mounting stud
1 products found
JPY: 13,500
USD: 84.62
-
Lascar EMA 1710 , LCD Digital Panel Multi-Function Meter for Current, Voltage EMA 1710
Analogue Style Voltmeter with Single-Hole Mounting. Auto-zero Colour analogue display No calibration required
1 products found
JPY: 11,800
USD: 73.97
-
Lascar Digital Voltmeter DC, LCD Display 3-Digits ±1 %, 44 x 21 mm EMV 1200
At voltages below 4Vdc the LCD will display 'LO' and go blank. At voltages in excess of 25Vdc the LCD will display 'HI'. 2-Wire LCD Voltmeter with Single-Hole Mounting. No invalid readings Signal powered Reverse polarity protected
1 products found
JPY: 12,100
USD: 75.85
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±1 %, 34 x 21.3 mm SP 400
rubber sealing bracket. 9.5mm 3.5 Digit Voltmeter Module – 9 Pin. Single or Dual supply operation Front or rear panel mounting Ultra-low profile Auto-zero, auto-polarity Programmable decimal points LED backlight: 40mA Input leakage current: 10pA Low battery warning Re-usable ratchet fixing clip Size: 22.4 x 35.1 x 16.8mm; panel cut-out: 34 x 21.3mm
1 products found
JPY: 10,500
USD: 65.82
-
Lascar Digital Voltmeter DC, LED Display 3.5-Digits ±1 %, 34 x 21.3 mm SP 100
9.4mm, 3.5 Digit, Splash Proof, Lascar SP Series. Front or rear panel mounting Ultra-low profile Auto-zero, auto-polarity Programmable decimal points Re-usable ratchet fixing clips Supplied with rubber sealing gasket Dimensions: H22.4 x W35.1 x D15.75mm Panel cut-out: 34 x 21.3mm Depth behind panel: 15mm SP 101 is a Digital hold version, stock-no. < 867-3173') 867-3173/
1 products found
JPY: 13,500
USD: 84.62
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±1 %, 34 x 21.3 mm SP 200
rubber sealing gasket. 9.5mm 3.5 Digit Voltmeter Module – 12 Pin. Single (5Vdc) supply operation Front or rear panel mounting Ultra-low profile Auto-zero, auto polarity Programmable decimal points LED backlight: 40mA Input leakage current: 10pA Low battery warning Re-usable ratchet fixing clip Dimensions: 22.4 x 35.1 x 18.91mm; panel cut-out: 34 x 21.3mm
1 products found
JPY: 11,100
USD: 69.58
-
Lascar Digital Voltmeter DC, LED Display 3.5-Digits ±1 %, 34 x 21.3 mm SP 300
9.4mm, 3.5 Digit, Splash Proof, Lascar SP Series. Front or rear panel mounting Ultra-low profile Auto-zero, auto-polarity Programmable decimal points Re-usable ratchet fixing clips Supplied with rubber sealing gasket Dimensions: H22.4 x W35.1 x D15.75mm Panel cut-out: 34 x 21.3mm Depth behind panel: 15mm SP 101 is a Digital hold version, stock-no. < 867-3173') 867-3173/
1 products found
JPY: 12,900
USD: 80.86
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±1 %, 28.4 x 11.4 mm DPM 1AS-BL
5.5mm, 3.5 Digit, Sub-miniature. One piece snap-in design Low power consumption Auto-zero, auto-polarity Programmable decimal points LED backlight Functions as ammeter when used with a 200mV digital current shunt 3 to 7.5Vdc power supply to measure an input voltage referenced to meter supply ground or 6 to 15Vdc to measure an input voltage which is floating with respect to meter supply Single-in-line connection Temperature stability zero drift 250 ppm/°C. Backlighting:. DPM 1AS-BL 15mA @ 5Vdc (typ.)
1 products found
JPY: 12,900
USD: 80.86
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±1 %, 33 x 15 mm DPM 2AS-BL
8.25mm, 3.5 Digit, Sub-miniature. One piece snap-in design Low power consumption Auto-zero, auto-polarity Programmable decimal points LED backlight Functions as ammeter when used with a 200mV digital current shunt 3 to 7.5Vdc power supply to measure an input voltage referenced to meter supply ground or 6 to 15Vdc to measure an input voltage which is floating with respect to meter supply Single-in-line connection Temperature stability zero drift 250 ppm/°C. Backlighting:. DPM 2AS-BL 15mA @ 5Vdc (typ.)
1 products found
JPY: 13,500
USD: 84.62
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±1 %, 38 x 18 mm DPM 3AS-BL
11mm, 3.5 Digit, Sub-miniature. One piece snap-in design Low power consumption Auto-zero, auto-polarity Programmable decimal points LED backlight Functions as ammeter when used with a 200mV digital current shunt 3 to 7.5Vdc power supply to measure an input voltage referenced to meter supply ground or 6 to 15Vdc to measure an input voltage which is floating with respect to meter supply Single-in-line connection Temperature stability zero drift 250 ppm/°C. Backlighting:. DPM 3AS-BL 40mA @ 5Vdc (typ.)
1 products found
JPY: 15,100
USD: 94.65
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±2 %, 44 x 21 mm EMV 1025S-01
12.5mm, 3.5 Digit 3-wire Voltmeter, Lascar EMV1025S. EMV 1025S is an easy to mount LCD digital voltmeter. It features full scale reading, fitted to the panel by locating its screw threaded stud through the hole, adding the washer and tightening the nut provided. The module's connections pass through the hollow stud into the target application. Installation time is greatly reduced with only 3 wires to connect. The user need only drill a single 5.5mm hole in the panel. Single hole mounting 12.5mm LCD digit height Full scale reading with different versions: - 200mV - 2V - 20V - 200V - Different Decimal Point configurations 3-Wire connection Auto-zero, auto-polarity Low battery warning Splashproof
1 products found
JPY: 9,400
USD: 58.92
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±3 %, 21.5 x 45 mm V 125
panel mounting bezel. 12.7mm 3.5 Digit Value Series Voltmeter. Auto zero, auto polarity Suitable for high volume applications Evaluation Kit contains one of each module and an evaluation board (stock no. < 420-0478') 420-0478
1 products found
JPY: 66,700
USD: 418.10
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±3 %, 34 x 15 mm V 1
panel mounting bezel. 6.3mm 3.5 Digit Value Series Voltmeter. Low cost panel meter that features a 3.5 Digit LCD with 6.3mm digit height. Value Series Voltmeter. Auto zero, auto polarity and user selectable decimal points. Suitable for high volume applications. Full scale deflection of 200mVd.c. Operating temperature range of 0 to +50°C. Evaluation Kit contains one of each module and an evaluation board (stock no. ; 420-0478 420-0478 )
1 products found
JPY: 63,000
USD: 394.91
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±3 %, 62 x 32 mm V 600
panel mounting bezel. 15mm, 3.5 Digit Value Series Voltmeter. Auto zero, auto polarity Suitable for high volume applications Evaluation Kit contains one of each module and an evaluation board (stock no. ; 420-0478 420-0478 )
1 products found
JPY: 76,600
USD: 480.16
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±1 % OEM 1B
8mm, 3.5 Digit Component Style. Very compact design Black metal housing Auto zero, auto-polarity
1 products found
JPY: 10,100
USD: 63.31
-
Lascar Digital Voltmeter DC, LED Display 3.5-Digits ±1 % OEM 1B-LED
8mm, 3.5 Digit, Component Style. Auto-zero, auto-polarity User-selectable decimal points Compact design Dimensions: H16.4 x W23.4 x D10.9mm Depth behind panel: 5.5mm
1 products found
JPY: 10,100
USD: 63.31
-
Lascar Digital Voltmeter DC, LED Display 3.5-Digits 0.1 %, 72 x 40 mm DPM 959B
IDC ribbon cable connector, plastic bezel and window.. 19mm, 4 Digit Meter. Operating Temperature Range 0 to +50°C. High contrast red LED display Single rail supply, suitable for single ended, differential and floating input measurement Programmable decimal points Auto zero, auto polarity Input leakage current 10pA. Dimensions: H39 x W71.5 x D21mm Panel cut-out: 72 x 40mm Depth behind panel: 6.5mm Rated to IP67
1 products found
JPY: 19,000
USD: 119.10
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±1 %, 32.5 Dia. mm EM 32-1B
mounting nut and rubber seat to achieve IP67 protection. Default supply voltage 3.5-6.5Vdc, configurable for 7.5-14Vdc operation. Round Hole Fitting LCD Voltmeter. Auto-zero, auto-polarity Selectable decimal points Input leakage current 10pA Screw terminal connections Diameter 40mm; panel cut-out dia. 32.5mm
1 products found
JPY: 16,800
USD: 105.31
-
Lascar Digital Voltmeter DC, LED Display 3.5-Digits ±1 %, 32.5 Dia. mm EM 32-1B-LED
Round Hole Fitting LED Voltmeter. Auto zero, auto polarity Resolution: 0.1mVdc Selectable decimal points Screw terminal connections Supplied with mounting nut and rubber seal; IP67 protection Dimensions: Ø38mm x 23.5mm depth Panel cut-out: 32.5mm Depth behind panel: 20.5mm
1 products found
JPY: 18,300
USD: 114.71
-
Lascar PanelPilot , LED Digital Panel Multi-Function Meter for Voltage, 54.5mm x 87mm SGD 28-M
Free Windows-based configuration software downloadable from the web- compatible with Windows XP, 2000, Vista and Windows 7 (32/64 bit). Panel Pilot Series - Multifunction Graphics Meters. The Panel Pilot Series range of colour TFT graphics meters allow you to program and display meter styles previously provided by a traditional panel meter. Available in both 2.4in (704-8138) and 2.8in (704-8131) and 3.5in (745-7793) sizes, both meters are programmable via USB interface with free configuration software provided with the unit. You can select the type of meter style you want from an initial choice of 6 (choices include 3.5 digit, bargraph, and analogue style options). You can then personalise the display by selecting preferences including colour, text and voltage input scaling. Once programming is complete, you can save all selections to the meter and computer, detach the unit and mount in their panel as they would any standard display.
1 products found
JPY: 31,300
USD: 196.20
-
Lascar PanelPilot , LED Digital Panel Multi-Function Meter for Voltage, 46mm x 74mm SGD 24-M
Free Windows-based configuration software downloadable from the web- compatible with Windows XP, 2000, Vista and Windows 7 (32/64 bit). Panel Pilot Series - Multifunction Graphics Meters. The Panel Pilot Series range of colour TFT graphics meters allow you to program and display meter styles previously provided by a traditional panel meter. Available in both 2.4in (704-8138) and 2.8in (704-8131) and 3.5in (745-7793) sizes, both meters are programmable via USB interface with free configuration software provided with the unit. You can select the type of meter style you want from an initial choice of 6 (choices include 3.5 digit, bargraph, and analogue style options). You can then personalise the display by selecting preferences including colour, text and voltage input scaling. Once programming is complete, you can save all selections to the meter and computer, detach the unit and mount in their panel as they would any standard display.
1 products found
JPY: 27,500
USD: 172.38
-
Lascar Digital Voltmeter DC, LCD Display 3.5-Digits ±0.1 %, 34 x 21.3 mm SP 400-EB-W
9.75mm Digit Height Voltmeter Module - 9 Pin. The SP 400-EB-W features an enhanced black LCD and 200mV d.c. measurement range with auto-zero and auto-polarity. Decimal points are user selectable. The SP 400-EB-W features a negative rail generator which enables the meter to measure a signal referenced to its own power supply GND. Enhanced contrast negative mode LCD with white LED backlighting ensures excellent readability under all light conditions. The module is easily fitted into the panel using the fixing clips provided. The design of the panel meter's housing ensures splash proofing using the supplied seal. Typical applications comprise of precision instrumentation systems, power supply monitoring, test boxes, panel mount indication ; low power voltage measurement Main features comprise of: 9.75mm (0.38") digit height 200mV d.c. full scale reading 5V operation Auto-zero ; auto-polarity Programmable decimal points Enhanced black LCD with white LED backlighting Low battery warning Splash proof
1 products found
JPY: 12,800
USD: 80.24
-
Lascar PanelPilot , TFT Digital Panel Multi-Function Meter for Current, 46mm x 74mm SGD 24-M420
Panel Pilot Series - Current Loop Indicator. The Panel Pilot Series range of colour TFT graphics meters allow users to program and display meter styles previously provided by a traditional panel meter. Colours, text labels, splash screen and input scaling can all be customised by the user through the software and then uploaded to the meter through the USB connection. Once programming is complete, the user can save all selections to the meter and computer, detach the unit and mount in their panel as they would any standard display. Colour TFT screen 320 x 240 pixel (QVGA) Measures 4 – 20 mA current loop (also 10 – 50 mA or 0 – 50 mA possible) Digital hold Operating voltage of 4 - 30V dc Programmable via the USB interface Panel Pilot software for setup and customise the display Simple panel mounting solution. Available display sizes. 2.4 (Stock-No. ; 777-6836 777-6836 ) 2.8 (Stock-No. ; 777-6830 777-6830 ) 3.5 (Stock-No. ; 777-6849 777-6849 ). Panel Pilot Software. Panel Pilot software is available for download free of charge from the web. Easy to install and use, the control software runs under Windows XP (Home and Professional Editions), Vista and Windows 7. The software is used to setup the appearance and operation of the meter and then upload these settings to the meter.
1 products found
JPY: 30,000
USD: 188.05
-
Lascar PanelPilot , TFT Development Kit SGD 43-A-DK+
Please consult the datasheet when using an external power supply for operational parameters. Development Kit for SGD 43-A Display. SGD 43-A DK+ is a development kit for the SGD 43-A display. The development board itself provides switches, dials, LEDs and screw terminal connections to quickly connect to and test all of the input/output functionality of the PanelPilotACE display. The development kit, SGD 43-A-DK+, is the best choice if you are starting to develop on the PanelPilotACE platform. It includes all you need to begin: an SGD 43-A, a development board and a USB cable. The board provides switches, dials, LEDs and screw terminal connections for all the input and output functionality of the SGD 43-A. Panel Pilot ACE Design Studio Software can be downloaded free from the dedicated website. PanelPilot ACE Display Specifications 4.3" colour TFT screen 4 single-ended bipolar inputs (± 40 V DC) Responsive capacitive touch-screen functionality PWM and digital output control Programmable with the USB interface Simple panel mounting solution Screw terminal connections Communicate with other devices using RS-232, I²2C or SPI. PanelPilot Development Board Specifications Prototyping "free" area allows for circuitry testing to be carried out with the display 2x labelled alarm outputs, coupled with LED indication for output status recognition 8x labelled digital I/O with LED indication 4x labelled PWM outputs with LED indication 4x analogue inputs supporting ±5V DC variable RS232 9-way D-Sub plug Dedicated SGD 43-A ; USB connections for uploads ; power Supports power via USB or 2.1mm DC power supply (RS Stock No. ; 706-8088 706-8088 typical)
1 products found
JPY: 110,000
USD: 689.53
-
Lascar DPM 942 , Digital Panel Multi-Function Meter, 40mm x 72mm DPM 942
mounting bezel and window
19mm, 3.5 Digit Display, Lascar DPM 9421 products found
JPY: 26,300
USD: 164.86
-
Lascar LCD Thermocouple Indicator for use with Type J K and T Thermocouple DTM 995B
19mm, 3.5 Digit LCD, Type K, Temperature Indicator with LED Backlighting. Cold function compensation allows operation in ambient temperatures from 0 to 50°C without affecting accuracy Degrees centigrade reading Two potentiometers for calibration Connections via screw terminals Mounting bezel and window supplied Optional, IP67 rated, alloy bezel available Accuracy ± 1% (± 1 count)
1 products found
JPY: 21,600
USD: 135.40
-
Lascar LED Digital Ammeter 4-Digits ±0.1 % 0°C to +50°C, 38 x 18 mm DPM 342
11mm, 3.5 Digit Display. Backlit display Programmable decimal points Zero and span calibrated by potentiometers Offset adjustment: ±950 + (span x 0.25) counts Screw terminal connections One-piece, snap-in design
1 products found
JPY: 22,700
USD: 142.29
-
Lascar BEZ 900-IP Bezel 48.5 x 80.5mm BEZ 900-IP
Mounting bezel and window. 100 x 32 Pixel Supertwist Back-lit. Wide viewing angle High-contrast Supertwist technology Yellow-Green LED backlight Epson SED1530 controller 6800, 8080 MPU and serial interfaces IDC ribbon cable connector (supplied) Optional water-proof (IP67 rated) alloy bezel is available (BEZ 900-IP)
1 products found
JPY: 8,440
USD: 52.91
-
Lascar BEZ 700-IP Bezel 35.2 x 65.2mm BEZ 700-IP
Alloy Bezel. Provides front face sealing to IP67/NEMA 4X Direct replacement for standard bezels Screw fixing Alloy and glass construction Panel cut-out: 57x27mm Suitable for use with 12.7mm, 3.5 digit meter
1 products found
JPY: 5,860
USD: 36.73
-
Lascar S43-RS485 , Add On Board for Current, Voltage, 75.9mm x 115.3mm S43-RS485
RS485 Add-on Board for SGD 43-A. The S43-RS485 is an RS485 add-on board used as an accessory for the SGD 43-A 4.3 PanelPilotACE display module. The S43-RS485 mounts onto the rear of the SGD 43-A display module and provides a three wire RS485 interface and an optional 120 Ω terminator. Features and Benefits. Allows RS485 communication for the SGD 43-A display Software supports ASCII-based serial communication and Modbus (RTU) protocol
1 products found
JPY: 7,030
USD: 44.07
-
Lascar S70-TP , Thermocouple Board for Temperature S70-TP
S70-TP Four-Channel Thermistor Board. The S70-TP is a four-channel thermistor board used as an accessory for the PanelPilotACE range of displays and panel meters. This particular add-on board is compatible with the SGD 70-A 7 display module. The thermistor board mounts onto the rear of the SGD 70-A and provides up to 4 thermistor inputs. The inputs can then be utilised within the free PanelPilotACE Design Studio software to measure, display, log and graph temperature readings. It is Supplied with 1 m thermistor probe fitted with 3.5 mm jack plug and features a potted metal sheath. Features and Benefits. For use with SGD 70-A 7 display meter Measures up to 4 temperature channels 4k7 to 22 k NTC thermistor resistance
1 products found
JPY: 16,100
USD: 100.92
-
Lascar PanelPilot , Development Kit SGD 70-A-DK+
Development Kit for SGD 70-A Display. The SGD 70-A DK+ is the development kit for the 7 PanelPilotACE compatible display, SGD 70-A. The development board itself allows users to quickly connect to and test all of the input and output functionality of the PanelPilotACE display. The kit includes a development board, an SGD 70-A PanelPilotACE display, a USB cable and a power supply. The development board includes LEDs and switches for digital I/O ‘s, four potentiometers to generate analogue inputs, variable brightness LEDs for PWM outputs and a prototyping area for testing circuitry. Connections are also available for the display ‘s RS232, RS485, SPI and I²C functionality.
1 products found
JPY: 148,000
USD: 927.73
-
Lascar Hour Counter, 5 digits, LCD, Screw Connection, Pulse, 27 V dc EMC 1500
Elapsed Hour Meter with Single-Hole Mounting. Hour and 1//10 hour resolution Trip and total measurement Ideal for tracking machine hours Voltage sense input and 100 hour pulse output No back-up power required
1 products found
JPY: 15,200
USD: 95.28
-
Lascar Digital Voltmeter DC, LED Display 3.5-Digits 0.1 %, 21.6 x 53.2 mm SP8-100
14mm, 3.5 Digit Meter. 200mVdc full scale deflection 50mA at +5Vdc power supply Auto zero and auto polarity Programmable decimal points Temperature stability: 150ppm/°C Bright red LED display Dimensions: 55.1x23.4mm Depth behind panel: 19mm Panel cut out: 53.1x21.4mm
1 products found
JPY: 20,000
USD: 125.37
-
Lascar PanelPilot , LED Digital Panel Multi-Function Meter for Voltage, 75mm x 92mm SGD 35-M
Free Windows-based configuration software downloadable from the web- compatible with Windows XP, 2000, Vista and Windows 7 (32/64 bit). Panel Pilot Series - Multifunction Graphics Meters. The Panel Pilot Series range of colour TFT graphics meters allow you to program and display meter styles previously provided by a traditional panel meter. Available in both 2.4in (704-8138) and 2.8in (704-8131) and 3.5in (745-7793) sizes, both meters are programmable via USB interface with free configuration software provided with the unit. You can select the type of meter style you want from an initial choice of 6 (choices include 3.5 digit, bargraph, and analogue style options). You can then personalise the display by selecting preferences including colour, text and voltage input scaling. Once programming is complete, you can save all selections to the meter and computer, detach the unit and mount in their panel as they would any standard display. pixel resolution TFT display with touch screen technology. Simple USB interface for setup for configuring and programming the meter. Customisable colours, labels, scaling an320x240d power-up 'splashscreen'. Simple panel mounting with screw terminal connections.
1 products found
JPY: 34,500
USD: 216.26
-
Lascar PanelPilot , TFT Digital Panel Multi-Function Meter for Current, 54.5mm x 87mm SGD 28-M420
Panel Pilot Series - Current Loop Indicator. The Panel Pilot Series range of colour TFT graphics meters allow users to program and display meter styles previously provided by a traditional panel meter. Colours, text labels, splash screen and input scaling can all be customised by the user through the software and then uploaded to the meter through the USB connection. Once programming is complete, the user can save all selections to the meter and computer, detach the unit and mount in their panel as they would any standard display. Colour TFT screen 320 x 240 pixel (QVGA) Measures 4 – 20 mA current loop (also 10 – 50 mA or 0 – 50 mA possible) Digital hold Operating voltage of 4 - 30V dc Programmable via the USB interface Panel Pilot software for setup and customise the display Simple panel mounting solution. Available display sizes. 2.4 (Stock-No. ; 777-6836 777-6836 ) 2.8 (Stock-No. ; 777-6830 777-6830 ) 3.5 (Stock-No. ; 777-6849 777-6849 ). Panel Pilot Software. Panel Pilot software is available for download free of charge from the web. Easy to install and use, the control software runs under Windows XP (Home and Professional Editions), Vista and Windows 7. The software is used to setup the appearance and operation of the meter and then upload these settings to the meter.
1 products found
JPY: 35,100
USD: 220.02
