RS PRO

Steel PCB Drill Bit 0.6mm　457-588

RS PRO

Steel PCB Drill Bit 1.3mm　457-601

RS PRO

Steel PCB Drill Bit 1.5mm　457-605

RS PRO

Steel PCB Drill Bit 1.2mm　457-611

RS PRO

Carbide PCB Drill Bit 0.8mm　457-633

RS PRO

Carbide PCB Drill Bit 0.9mm　457-639

RS PRO

Carbide PCB Drill Bit 0.6mm　457-645

RS PRO

Carbide PCB Drill Bit 0.7mm　457-649

RS PRO

Carbide PCB Drill Bit 1.2mm　457-673

RS PRO

Carbide PCB Drill Bit 1.3mm　457-677

RS PRO

Bending, Cutting Hand-Driven Machine　607-134

Keystone

34, Wide Roll Eyelet PCB Rivet for 2.36mm Diameter, 3.18mm Length　34

Wide roll eyelets. Standard eyelets, precision-made to ensure standard dimensions in a single series. Preserve good solderability, even after extended storage.

Keystone

35, Wide Roll Eyelet PCB Rivet for 2.36mm Diameter, 3.96mm Length　35

Wide roll eyelets. Standard eyelets, precision-made to ensure standard dimensions in a single series. Preserve good solderability, even after extended storage.

Keystone

45, Wide Roll Eyelet PCB Rivet for 3.18mm Diameter, 3.96mm Length　45

Wide roll eyelets. Standard eyelets, precision-made to ensure standard dimensions in a single series. Preserve good solderability, even after extended storage.

Keystone

46, Wide Roll Eyelet PCB Rivet for 3.18mm Diameter, 4.75mm Length　46

Wide roll eyelets. Standard eyelets, precision-made to ensure standard dimensions in a single series. Preserve good solderability, even after extended storage.

Dormer

A720 0.20MM, Cobalt PCB Drill Bit 0.2mm　A720 0.20MM

HSCo Micro Drill (A720). HSCo drill for small diameter drilling in most materials up to x2.5 diameter All drills supplied on 1mm shank Manufactured to DIN1899 Standards

Dormer

A720 0.30MM, Cobalt PCB Drill Bit 0.3mm　A720 0.30MM

HSCo Micro Drill (A720). HSCo drill for small diameter drilling in most materials up to x2.5 diameter All drills supplied on 1mm shank Manufactured to DIN1899 Standards

CIF

DW10.5, Carbide PCB Drill Bit 0.1mm　DW10.5

CIF Carbide Milling Bits. High precision milling drill and engraving bit High grade solid carbide remain sharp for much longer than standard steel bits A high speed is recomended to produce good quality lines and avoid breakage

CIF

DU68, Carbide PCB Drill Bit 0.8mm　DU68

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU91, Carbide PCB Drill Bit 3.17mm　DU91

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU68.10, Carbide PCB Drill Bit 0.8mm　DU68.10

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU70.10, Carbide PCB Drill Bit 1mm　DU70.10

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU85.10, Carbide PCB Drill Bit 2.5mm　DU85.10

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

Gardner Denver Cooper

506445, Wire Wrapping Bit 26AWG　506445

Pins and guides for wrapping. Class A pins and guides. These are selected according to the cross-section of the lead used.

Gardner Denver Cooper

T18840, Wire Wrapping Sleeve 24AWG　T18840

Pins and guides for wrapping. Class A pins and guides. These are selected according to the cross-section of the lead used.

Mega Electronics

13-111011-1, Carbide PCB Drill Bit 0.9mm　13-111011-1

1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.

Mega Electronics

13-111019-1, Carbide PCB Drill Bit 1.3mm　13-111019-1

1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.

Mega Electronics

13-111015-1, Carbide PCB Drill Bit 1.1mm　13-111015-1

1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.

Mega Electronics

13-111017-1, Carbide PCB Drill Bit 1.2mm　13-111017-1

1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.

Mega Electronics

13-111021-1, Carbide PCB Drill Bit 1.4mm　13-111021-1

1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.

Mega Electronics

13-111023-1, Carbide PCB Drill Bit 1.5mm　13-111023-1

1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.

CIF

EP116, Drilling Plywood Board　EP116

Compatible with CAD and CAM software packages, also accepts HPGL, ISO, EXCELLON, GERBER, GCODE, DXF files. Technodrill drilling / milling machine. The Technodrill machine etches, drills and mills plastic, metal and aluminium parts, and printed circuit boards. Like a CNC machine, it can shape parts regardless of the source of the drawing. Two versions available: an industrial version and a teaching version allowing configuration of multiple installations which can be used on a network. Immediate familiarisation. Multi-purpose: drilling, milling, trimming. Compatible with all file types. Extremely accurate axis guidance. True 3-axis system. Micro-step control, avoids mechanical resonance. GALAAD 3 control software (with free updates). Integrated electronics, 32-bit microprocessor. Tool sensor (removable for XL version) Safety: mechanical and software limiting

CIF

BG9.S, Rivet PCB Rivet for 1.3mm Diameter, 3mm Length　BG9.S

Rivets and Insertion Tool. 3mm long rivets for double-sided metallised circuits Tool designed for fast on-demand insertion ( ; 160-3694 160-3694 ) Supplied in boxes of 100 rivets

CIF

BG10.S, Rivet PCB Rivet for 1.8mm Diameter, 3mm Length　BG10.S

Rivets and Insertion Tool. 3mm long rivets for double-sided metallised circuits Tool designed for fast on-demand insertion ( ; 160-3694 160-3694 ) Supplied in boxes of 100 rivets

CIF

Carbide PCB Drill Bit 3.17mm　DU201

CIF Carbide Milling Bits. High precision milling drill and engraving bit High grade solid carbide remain sharp for much longer than standard steel bits A high speed is recomended to produce good quality lines and avoid breakage

CIF

DU66, Carbide PCB Drill Bit 0.6mm　DU66

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU69, Carbide PCB Drill Bit 0.9mm　DU69

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU67, Carbide PCB Drill Bit 0.7mm　DU67

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU71, Carbide PCB Drill Bit 1.1mm　DU71

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU72, Carbide PCB Drill Bit 1.2mm　DU72

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.