[RS PRO]Resin, Cork
Filters
-
RS PRO White Acetal Rod, 1m x 40mm Diameter 139-524
Acetal Copolymer • Has low moisture absorption, good chemical resistance, and excellent mechanical strength.
Its stable dimensions make it suitable for high-precision components, bearings, bushes, gears, valves, and valve seats.1 products found
JPY: 13,900
USD: 87.13
-
White Plastic Sheet, 500mm x 300mm x 20mm 139-580
Acetal Copolymer • Has low moisture absorption, good chemical resistance, and excellent mechanical strength.
Its stable dimensions make it suitable for high-precision components, bearings, bushes, gears, valves, and valve seats.1 products found
JPY: 30,500
USD: 191.19
-
White Plastic Sheet, 500mm x 300mm x 30mm 139-596
Acetal Copolymer • Has low moisture absorption, good chemical resistance, and excellent mechanical strength.
Its stable dimensions make it suitable for high-precision components, bearings, bushes, gears, valves, and valve seats.1 products found
JPY: 45,800
USD: 287.09
-
Clear Plastic Sheet, 500mm x 300mm x 3mm 434-295
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 1,730
USD: 10.84
-
RS PRO White Nylon Rod, 1m x 10mm Diameter 680-246
Nylon 66
High melting point Nylon 66 Excellent electrical properties High chemical resistance Impact resistance Easy machining to make gears White1 products found
JPY: 77,200
USD: 483.92
-
White Plastic Sheet, 500mm x 300mm x 10mm 680-498
Acetal Copolymer • Has low moisture absorption, good chemical resistance, and excellent mechanical strength.
Its stable dimensions make it suitable for high-precision components, bearings, bushes, gears, valves, and valve seats.1 products found
JPY: 15,600
USD: 97.79
-
RS PRO White Polyethylene PE Rod, 1m x 20mm Diameter 680-533
Polyethylene has poor resistance to hot water and gradually decomposes when exposed to UV light.
Polyethylene (PE-UHMW)1 products found
JPY: 3,650
USD: 22.88
-
White Plastic Sheet, 600mm x 300mm x 3mm 680-678
Size Intersection of Attached PTFE Sheet ±5 mm
PTFE (Extrusion Molding)1 products found
JPY: 19,100
USD: 119.73
-
Grey Plastic Sheet, 1000mm x 500mm x 3mm 680-741
Grey PVC plastic material • Excellent mechanical strength Resistant to most chemicals Easy to assemble and machine Example of use: Chemical plant tanks, electrical components, valves, pumps Maximum operating temperature 60°C
1 products found
JPY: 39,800
USD: 249.48
-
RS PRO White Nylon Rod, 1m x 30mm Diameter 770-002
Nylon 66
High melting point Nylon 66 Excellent electrical properties High chemical resistance Impact resistance Easy machining to make gears White1 products found
JPY: 28,300
USD: 177.40
-
RS PRO Beige Polyetheretherketone PEEK Rod, 300mm x 10mm Diameter 770-670
All dimensions are approximate.
Victrex & reg; Peek 450G (Poly Ether Ether Ketone)1 products found
JPY: 3,430
USD: 21.50
-
Clear Plastic Sheet, 500mm x 400mm x 1.5mm 824-480
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 2,430
USD: 15.23
-
Clear Plastic Sheet, 500mm x 400mm x 2mm 824-496
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 2,570
USD: 16.11
-
Clear Acrylic Sheet, 500mm x 400mm x 2.5mm 824-503
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 3,410
USD: 21.38
-
Clear Plastic Sheet, 500mm x 400mm x 4mm 824-519
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 5,150
USD: 32.28
-
Clear Plastic Sheet, 500mm x 400mm x 5mm 824-525
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 6,450
USD: 40.43
-
Clear Plastic Sheet, 500mm x 400mm x 2mm 824-632
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 15,600
USD: 97.79
-
Clear Plastic Sheet, 500mm x 400mm x 3mm 824-654
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 117,000
USD: 733.40
-
Clear Plastic Sheet, 500mm x 400mm x 4mm 824-660
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 4,360
USD: 27.33
-
Clear Plastic Sheet, 500mm x 400mm x 5mm 824-676
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 5,590
USD: 35.04
-
Clear Plastic Sheet, 500mm x 400mm x 6mm 825-253
Acrylic Sheet/Rod
Thermoplastic resin with excellent chemical resistance, available in cast type and extrusion type.1 products found
JPY: 6,470
USD: 40.56
-
White Plastic Sheet, 500mm x 500mm x 2mm 852-261
Perforated Sheet Made of Polypropylene
The RS Pro perforated polypropylene (PP) sheet is used as a strainer or drain in the same way as the perforated metal sheet. However, they are lighter and more resistant to corrosion than metal ones.1 products found
JPY: 13,900
USD: 87.13
-
RS PRO Opaque Fluoroplastics PTFE Rod, 500mm x 50mm Diameter 196-9950
The PTFE sheets supplied have a size tolerance of ±5 mm. PTFE (Extruded). Extremely high chemical resistance Wide temperature range - maximum service temperature 260°C Low friction and low adhesion Resistant to Radiation Excellent dielectric performance
1 products found
JPY: 17,000
USD: 106.56
-
Opaque Fluoroplastics PTFE Sheet, 300mm x 300mm x 6mm 197-0051
RS Pro Solid Plastic PTFE Sheets. From RS Pro a range of high-quality PTFE solid plastic sheets available in a range of sizes and thicknesses. What are Solid Plastic Sheets?. Solid plastic sheets are sheets of strong durable plastic or plastic like materials which are cut to size and sold in a wide range of sizes and thickness. Solid plastic sheets, once purchased, can then be cut or machined into components for the fabrication of products for use in a wide range of industries. Different plastics have different properties which lend them for use in specific applications. What is PTFE Plastic?. PTFE (Polytetrafluorethylene sometimes referred to as Teflon) is a semi-crystalline thermoplastic that has low strength and rigidity but a wealth of other unique properties that make it a high performance product. The main attributes of PTFE plastic are its high thermal stability, excellent chemical resistance and excellent sliding properties. Parts made of PTFE tend to generate lower friction and heat, which increases the life of the parts made from it and reduces maintenance costs. The very high sliding properties of PTFE mean that the surfaces can slide over each other with low friction resistance known as low coefficient of friction. This reduces wear and tear making this plastic ideal for use in component such as bearings. Features and Benefits. Extremely high chemical resistance Hot water resistant High temperature performance a high melting point of -200 to +260°C, short-term up to 300°C Excellent sliding properties with low coefficient of friction Non-stick surface, no materials will stick to it. PTFE is also difficult to bond or weld High coefficient of thermal expansion (The ratio that a material expands in accordance with changes in temperature) Relatively low strength and rigidity Excellent UV and weather resistance Good electrical insulation properties Low dielectric constant Flame retardent and self-extinguishing V-0 Gamma radiation sensitive Non-melting. Applications. PTFE plastic sheet due to its excellent sliding properties, high thermal stability and chemical resistance is suitable for use in a wide range of industries including transport and conveying, pump and instrument construction, electrical engineering, food processing and medical, aircraft and aerospace, laser technology and many others. Due to its unique properties PTFE plastic can be used in the fabrication of components for sliding applications that are subject to a high level of chemical stress. Components that can be manufactured from this plastic include the following:. Slide bearings and runners Pump housings and parts Valve seats Tank linings Roller coverings Pipe linings Filter housings Etching plates High frequency insulation Seals. Questions and Answers. What tools can be used to cut this plastic sheet? The choice of tools used to cut this plastic depend on the thickness of the sheet being cut. Thin sheets of plastic can be cut using a sharp utility knife. Thicker sheets can be cut using a range of different types of saw such as a fine toothed hand saw or hacksaw or an electric table saw, band saw, circular saw or jig saw. The teeth on the saw blade should be well sharpened and evenly spaced out with a uniform height and shape to avoid cracking or chipping the plastic. The friction caused by sawing can cause the blade to heat which can melt the plastic therefore using a ‘no-melt ‘ blade is recommended. If using a regular blade, it is an idea to pause between cuts to allow the blade to cool.
1 products found
JPY: 15,400
USD: 96.53
-
Opaque Fluoroplastics PTFE Sheet, 300mm x 300mm x 8mm 197-0067
RS Pro Solid Plastic PTFE Sheets. From RS Pro a range of high-quality PTFE solid plastic sheets available in a range of sizes and thicknesses. What are Solid Plastic Sheets?. Solid plastic sheets are sheets of strong durable plastic or plastic like materials which are cut to size and sold in a wide range of sizes and thickness. Solid plastic sheets, once purchased, can then be cut or machined into components for the fabrication of products for use in a wide range of industries. Different plastics have different properties which lend them for use in specific applications. What is PTFE Plastic?. PTFE (Polytetrafluorethylene sometimes referred to as Teflon) is a semi-crystalline thermoplastic that has low strength and rigidity but a wealth of other unique properties that make it a high performance product. The main attributes of PTFE plastic are its high thermal stability, excellent chemical resistance and excellent sliding properties. Parts made of PTFE tend to generate lower friction and heat, which increases the life of the parts made from it and reduces maintenance costs. The very high sliding properties of PTFE mean that the surfaces can slide over each other with low friction resistance known as low coefficient of friction. This reduces wear and tear making this plastic ideal for use in component such as bearings. Features and Benefits. Extremely high chemical resistance Hot water resistant High temperature performance a high melting point of -200 to +260°C, short-term up to 300°C Excellent sliding properties with low coefficient of friction Non-stick surface, no materials will stick to it. PTFE is also difficult to bond or weld High coefficient of thermal expansion (The ratio that a material expands in accordance with changes in temperature) Relatively low strength and rigidity Excellent UV and weather resistance Good electrical insulation properties Low dielectric constant Flame retardent and self-extinguishing V-0 Gamma radiation sensitive Non-melting. Applications. PTFE plastic sheet due to its excellent sliding properties, high thermal stability and chemical resistance is suitable for use in a wide range of industries including transport and conveying, pump and instrument construction, electrical engineering, food processing and medical, aircraft and aerospace, laser technology and many others. Due to its unique properties PTFE plastic can be used in the fabrication of components for sliding applications that are subject to a high level of chemical stress. Components that can be manufactured from this plastic include the following:. Slide bearings and runners Pump housings and parts Valve seats Tank linings Roller coverings Pipe linings Filter housings Etching plates High frequency insulation Seals. Questions and Answers. What tools can be used to cut this plastic sheet? The choice of tools used to cut this plastic depend on the thickness of the sheet being cut. Thin sheets of plastic can be cut using a sharp utility knife. Thicker sheets can be cut using a range of different types of saw such as a fine toothed hand saw or hacksaw or an electric table saw, band saw, circular saw or jig saw. The teeth on the saw blade should be well sharpened and evenly spaced out with a uniform height and shape to avoid cracking or chipping the plastic. The friction caused by sawing can cause the blade to heat which can melt the plastic therefore using a ‘no-melt ‘ blade is recommended. If using a regular blade, it is an idea to pause between cuts to allow the blade to cool.
1 products found
JPY: 20,800
USD: 130.38
-
Opaque Fluoroplastics PTFE Sheet, 300mm x 300mm x 20mm 197-0102
RS Pro Solid Plastic PTFE Sheets. From RS Pro a range of high-quality PTFE solid plastic sheets available in a range of sizes and thicknesses. What are Solid Plastic Sheets?. Solid plastic sheets are sheets of strong durable plastic or plastic like materials which are cut to size and sold in a wide range of sizes and thickness. Solid plastic sheets, once purchased, can then be cut or machined into components for the fabrication of products for use in a wide range of industries. Different plastics have different properties which lend them for use in specific applications. What is PTFE Plastic?. PTFE (Polytetrafluorethylene sometimes referred to as Teflon) is a semi-crystalline thermoplastic that has low strength and rigidity but a wealth of other unique properties that make it a high performance product. The main attributes of PTFE plastic are its high thermal stability, excellent chemical resistance and excellent sliding properties. Parts made of PTFE tend to generate lower friction and heat, which increases the life of the parts made from it and reduces maintenance costs. The very high sliding properties of PTFE mean that the surfaces can slide over each other with low friction resistance known as low coefficient of friction. This reduces wear and tear making this plastic ideal for use in component such as bearings. Features and Benefits. Extremely high chemical resistance Hot water resistant High temperature performance a high melting point of -200 to +260°C, short-term up to 300°C Excellent sliding properties with low coefficient of friction Non-stick surface, no materials will stick to it. PTFE is also difficult to bond or weld High coefficient of thermal expansion (The ratio that a material expands in accordance with changes in temperature) Relatively low strength and rigidity Excellent UV and weather resistance Good electrical insulation properties Low dielectric constant Flame retardent and self-extinguishing V-0 Gamma radiation sensitive Non-melting. Applications. PTFE plastic sheet due to its excellent sliding properties, high thermal stability and chemical resistance is suitable for use in a wide range of industries including transport and conveying, pump and instrument construction, electrical engineering, food processing and medical, aircraft and aerospace, laser technology and many others. Due to its unique properties PTFE plastic can be used in the fabrication of components for sliding applications that are subject to a high level of chemical stress. Components that can be manufactured from this plastic include the following:. Slide bearings and runners Pump housings and parts Valve seats Tank linings Roller coverings Pipe linings Filter housings Etching plates High frequency insulation Seals. Questions and Answers. What tools can be used to cut this plastic sheet? The choice of tools used to cut this plastic depend on the thickness of the sheet being cut. Thin sheets of plastic can be cut using a sharp utility knife. Thicker sheets can be cut using a range of different types of saw such as a fine toothed hand saw or hacksaw or an electric table saw, band saw, circular saw or jig saw. The teeth on the saw blade should be well sharpened and evenly spaced out with a uniform height and shape to avoid cracking or chipping the plastic. The friction caused by sawing can cause the blade to heat which can melt the plastic therefore using a ‘no-melt ‘ blade is recommended. If using a regular blade, it is an idea to pause between cuts to allow the blade to cool.
1 products found
JPY: 52,800
USD: 330.97
-
RS PRO Black Acetal Rod, 1m x 30mm Diameter 282-0323
This material is not suitable or approved for medical implantation into the human body Tolerance thickness plates: +0.2 mm → +0.9 mm. Acetal, Copolymer (POM). Has high strength and rigidity. The raw material granules used meet the requirements of FDA 21CFR 177.2470 for repeated food contact, this only applies to the colours the BLACK is NON-FDA compliant. The material is processed according to the granule suppliers guidelines. Applications: instrument handles, friction bearings/strips, insulators and seals etc.
1 products found
JPY: 7,730
USD: 48.46
-
Opaque Fluoroplastics PTFE Sheet, 600mm x 300mm x 1.5mm 282-0575
RS Pro Solid Plastic PTFE Sheets. From RS Pro a range of high-quality PTFE solid plastic sheets available in a range of sizes and thicknesses. What are Solid Plastic Sheets?. Solid plastic sheets are sheets of strong durable plastic or plastic like materials which are cut to size and sold in a wide range of sizes and thickness. Solid plastic sheets, once purchased, can then be cut or machined into components for the fabrication of products for use in a wide range of industries. Different plastics have different properties which lend them for use in specific applications. What is PTFE Plastic?. PTFE (Polytetrafluorethylene sometimes referred to as Teflon) is a semi-crystalline thermoplastic that has low strength and rigidity but a wealth of other unique properties that make it a high performance product. The main attributes of PTFE plastic are its high thermal stability, excellent chemical resistance and excellent sliding properties. Parts made of PTFE tend to generate lower friction and heat, which increases the life of the parts made from it and reduces maintenance costs. The very high sliding properties of PTFE mean that the surfaces can slide over each other with low friction resistance known as low coefficient of friction. This reduces wear and tear making this plastic ideal for use in component such as bearings. Features and Benefits. Extremely high chemical resistance Hot water resistant High temperature performance a high melting point of -200 to +260°C, short-term up to 300°C Excellent sliding properties with low coefficient of friction Non-stick surface, no materials will stick to it. PTFE is also difficult to bond or weld High coefficient of thermal expansion (The ratio that a material expands in accordance with changes in temperature) Relatively low strength and rigidity Excellent UV and weather resistance Good electrical insulation properties Low dielectric constant Flame retardent and self-extinguishing V-0 Gamma radiation sensitive Non-melting. Applications. PTFE plastic sheet due to its excellent sliding properties, high thermal stability and chemical resistance is suitable for use in a wide range of industries including transport and conveying, pump and instrument construction, electrical engineering, food processing and medical, aircraft and aerospace, laser technology and many others. Due to its unique properties PTFE plastic can be used in the fabrication of components for sliding applications that are subject to a high level of chemical stress. Components that can be manufactured from this plastic include the following:. Slide bearings and runners Pump housings and parts Valve seats Tank linings Roller coverings Pipe linings Filter housings Etching plates High frequency insulation Seals. Questions and Answers. What tools can be used to cut this plastic sheet? The choice of tools used to cut this plastic depend on the thickness of the sheet being cut. Thin sheets of plastic can be cut using a sharp utility knife. Thicker sheets can be cut using a range of different types of saw such as a fine toothed hand saw or hacksaw or an electric table saw, band saw, circular saw or jig saw. The teeth on the saw blade should be well sharpened and evenly spaced out with a uniform height and shape to avoid cracking or chipping the plastic. The friction caused by sawing can cause the blade to heat which can melt the plastic therefore using a ‘no-melt ‘ blade is recommended. If using a regular blade, it is an idea to pause between cuts to allow the blade to cool.
1 products found
JPY: 175,000
USD: 1,096.97
-
Natural Nylon Sheet, 500mm x 500mm x 16mm 282-0597
Cast Nylon 6. Natural colour cast Nylon 6. Free of internal stresses High tensile and impact strength Chemical, acid and alkali resistant High abrasion resistance Low finished component count Suitable for all bearing, bush and gear applications Natural colour
1 products found
JPY: 29,700
USD: 186.17
-
Black Nylon Sheet, 500mm x 300mm x 6mm 282-0711
This material is not electrically insulating. Nylon 6. Black extruded Nylon 6 containing MoS ;sub>2 ;/sub>. Good sliding and dry running properties Resistant to oils, grease, petrol etc. Easily welded, bonded, machined and polished UV and weather resistant Suitable for friction bearings/strips, gears, castors, pulleys, chains, wheels and machine parts etc Black in colour Tolerance thickness sheets: +0.2 mm → +0.9 mm
1 products found
JPY: 4,240
USD: 26.58
-
White Acetal Sheet, 500mm x 300mm x 16mm 282-2228
RS Pro Natural POM-C Acetal Solid Plastic Sheets. From RS Pro a range of high-quality Acetal solid plastic sheets natural in colour and available in a range of sizes and thicknesses. What are Solid Plastic Sheets?. Solid plastic sheets are sheets of strong durable plastic or plastic like materials which are cut to size and sold in a wide range of sizes and thickness. These hard plastic sheets, once purchased, can then be cut or machined into components for the fabrication of products for use in a wide range of industries. Different plastics have different properties which lend them for use in specific applications. What is POM-C Acetal?. Acetal or polyacetal is a semi-crystalline thermoplastic and is a member of the family of plastics called polyoxymethylene (POM). This POM-C acetal is an unfilled POM copolymer which, due to its high crystallinity, is especially tough with good chemical resistance. This type of acetal also offers high mechanical strength and rigidity, excellent wear, low moisture absorption and excellent dimensional stability. Acetal also has good sliding properties, it is slippy, this means that components made from acetal slide very easily and don ‘t stick or lock up. This is an essential quality when this plastic is used in delicate or fine instruments where smooth operation is essential and in gears and bearings. Acetal solid plastic sheet is classified as an engineering plastic and, due to its unique properties, is ideal for use in a wide range of industries and is also one of the best engineering plastics for machining. Features and Benefits. Strong, tough and rigid Low moisture absorption, this reduces likelihood of distortion or expansion during machining Excellent dimensional stability. (This is the degree to which a material maintains its original dimensions when subjected to changes in temperature and humidity). Hot water resistant Good chemical resistance Resistant to dilute acids, cleaning agents and many solvents Good sliding properties Low friction with good wear resistance Difficult to bond Easily welded Good electrical insulation properties Easy to machine and polish. What Industries is POM-C Acetal Solid Plastic Sheet used in?. Acetal solid plastic sheet is used in a wide range of industries including the following:. Mechanical engineering Automotive engineering Electrical engineering Precision engineering Transport and conveyor technology Food Technology Medical Technology Aircraft and Aerospace technology Oil and gas technology. What Products is POM-C Acetal Solid Plastic Sheet Used in?. Acetal is ideal for use in precision parts that require high rigidity, low friction and excellent dimensional stability. Components that are manufactured from this plastic include the following;. Household appliances Friction bearings Gears Tool supports Housing parts Rollers Friction Strips Plugs Insulators Agitators and kneading elements Seals
1 products found
JPY: 24,200
USD: 151.70
-
Clear Round Acrylic Tube, 1m x 13mm OD x 10mm ID 282-2256
Acrylic Tube - Extruded. Extruded thermoplastic acrylic tubes with excellent optical properties Good resistance to most inorganic chemicals, oils, dilute acids/alkalis and weathering
1 products found
JPY: 24,200
USD: 151.70
-
Clear Round Acrylic Tube, 1m x 38mm OD x 32mm ID 282-2278
Acrylic Tube - Extruded. Extruded thermoplastic acrylic tubes with excellent optical properties Good resistance to most inorganic chemicals, oils, dilute acids/alkalis and weathering
1 products found
JPY: 4,870
USD: 30.53
-
Black Polyethylene PE Sheet, 500mm x 500mm x 20mm 408-3863
Polyethylene has poor resistance to hot water, and exposure to UV light will result in gradual decomposition. High Density Polyethylene (HDPE). Used in mechanical/electrical/general engineering, transport/conveyor technology, household appliances, food and general clean industries. Typical applications include chemical apparatus, plugs, seals, food processing, insulators, and low load rollers. Tough with low water absorption properties and good sliding properties Resistant to dilute acids, cleaning agents and numerous solvents Very good electrical insulation properties Black in colour
1 products found
JPY: 19,200
USD: 120.35
-
White Nylon Sheet, 500mm x 305mm x 5mm 408-3936
RS Pro Natural Nylon 66 Solid Plastic Sheets. From RS Pro a range of high-quality natural coloured Nylon 66 solid plastic sheets available in a range of sizes and thicknesses. What are Solid Plastic Sheets?. Solid plastic sheets are sheets of strong durable plastic or plastic like materials which are cut to size and sold in a wide range of sizes and thickness. These hard plastic sheets, once purchased, can then be cut or machined into components for the fabrication of products for use in a wide range of industries. Different plastics have different properties which lend them for use in specific applications. What is Nylon 66?. Nylon 66 is also known as Polyamide 66 or PA 66 and is a semi-crystalline engineering plastic. This plastic is both hard and rigid with good abrasive and wear resistance along with low frictional properties. It also has good thermal dimensional stability which is the degree to which a material maintains its original dimensions when subjected to changes in temperature and humidity. This Nylon 66 plastic also features good slide and wear properties, components made from this solid plastic sheet slide very easily and don ‘t stick or lock up. This is an essential quality when this material is used in delicate or fine instruments where smooth operation is essential as well as in gears and bearings. Features and Benefits. Good rigidity and hardness Good slide and low frictional properties Good abrasion and impact resistance Outstanding wear resistance Resistant to many chemicals, oils, greases and fuels Very good temperature resistance Good thermal dimensional stability Electrically insulating Weldable and bondable. Applications. Nylon 66 with its unique qualities, is used in a wide range of different industries. These industries include electronics, automotive, food, textiiles, agricultural and building, packaging and paper and aircraft and aerospace. Nylon 66 with its outstanding wear resistance and good slide and wear properties is ideal for use in a wide range of applications including the following;. Gear wheels and Cam discs Friction strips and bearings Bushes and spindle nuts Piston guides Castors Impact plates and damping plates Conveyor screws Rope pulleys Plug parts. Questions and Answers. What tools can be used to cut this plastic sheet? The choice of tools used to cut this plastic depend on the thickness of the sheet being cut. Thin sheets of plastic can be cut using a sharp utility knife. Thicker sheets can be cut using a range of different types of saw such as a fine toothed hand saw or hacksaw or an electric table saw, band saw, circular saw or jig saw. The teeth on the saw blade should be well sharpened and evenly spaced out with a uniform height and shape to avoid cracking or chipping the plastic. The friction caused by sawing can cause the blade to heat which can melt the plastic therefore using a ‘no-melt ‘ blade is recommended. If using a regular blade, it is an idea to pause between cuts to allow the blade to cool.
1 products found
JPY: 56,100
USD: 351.66
-
Clear Round Acrylic Tube, 1m x 22mm OD x 16mm ID 408-4024
Acrylic Tube - Extruded. Extruded thermoplastic acrylic tubes with excellent optical properties Good resistance to most inorganic chemicals, oils, dilute acids/alkalis and weathering
1 products found
JPY: 2,540
USD: 15.92
-
Black Neoprene Rubber Sheets, 1m x 600mm x 12mm 506-3113
Neoprene Rubber. Can be used in outdoor applications where resistance to atmospheric ageing sunlight and seawater are required Hardness IRHD 60° Density 1.4 g/cm³. Neoprene® is a registered trade mark of Du Pont.
1 products found
JPY: 42,000
USD: 263.27
-
Black Neoprene Rubber Sheets, 1m x 600mm x 10mm 506-3135
Neoprene Rubber. Can be used in outdoor applications where resistance to atmospheric ageing sunlight and seawater are required Hardness IRHD 60° Density 1.4 g/cm³. Neoprene® is a registered trade mark of Du Pont.
1 products found
JPY: 36,100
USD: 226.29
-
Black Neoprene Rubber Sheets, 1m x 600mm x 1.5mm 506-3163
Neoprene Rubber. Can be used in outdoor applications where resistance to atmospheric ageing sunlight and seawater are required Hardness IRHD 60° Density 1.4 g/cm³. Neoprene® is a registered trade mark of Du Pont.
1 products found
JPY: 3,390
USD: 21.25
-
Black Neoprene Rubber Sheets, 1m x 1.2m x 10mm 506-3185
Neoprene Rubber. Can be used in outdoor applications where resistance to atmospheric ageing sunlight and seawater are required Hardness IRHD 60° Density 1.4 g/cm³. Neoprene® is a registered trade mark of Du Pont.
1 products found
JPY: 16,100
USD: 100.92
