[HOUSE BM Co., Ltd.]ORANGE BOOK 2018 NEW ITEM
Filters
-
Cutting Blade For Plaster Board BDM10022 BDM-10022
By adding a special limiting blade, excessive cutting into the cutting material is prevented and light cutting is realized.
Cutting board surface paper can be cut cleanly by sharp angle polishing.1 products found
JPY: 2,680
USD: 16.80
-
Cutting Blade For Plaster Board BDM12528 BDM-12528
By adding a special limiting blade, excessive cutting into the cutting material is prevented and light cutting is realized.
Cutting board surface paper can be cut cleanly by sharp angle polishing.1 products found
JPY: 2,750
USD: 17.24
-
Cutting Blade For Reinforced Plaster Board BDMK10035 BDMK-10035
With the finest fine grain chips, it has excellent wear resistance for strengthening and cutting hard boards.
With 6 to 1 set of blades, it has high straightness and cuts 25% up (compared to our company conventional).1 products found
JPY: 3,420
USD: 21.44
-
Cutting Blade For Reinforced Plaster Board BDMK12542 BDMK-12542
With the finest fine grain chips, it has excellent wear resistance for strengthening and cutting hard boards.
With 6 to 1 set of blades, it has high straightness and cuts 25% up (compared to our company conventional).1 products found
JPY: 3,760
USD: 23.57
-
Chip SAWFor Galvalume Steel Plate DMG10040 DMG-10040
With a blade thickness of 1 to 2 mm, the cutting speed is fast, and the ultra-fine cermet chip type achieves stable long cuts with little wear.
Employing a deformed embedded tip, it is resistant to blade skipping, prevents excessive cutting with a limiting blade, and allows smooth cutting with little burr even when cutting thin sheet metal.1 products found
JPY: 4,240
USD: 26.58
-
Chip SAWFor Galvalume Steel Plate DMG12550 DMG-12550
With a blade thickness of 1 to 2 mm, the cutting speed is fast, and the ultra-fine cermet chip type achieves stable long cuts with little wear.
Employing a deformed embedded tip, it is resistant to blade skipping, prevents excessive cutting with a limiting blade, and allows smooth cutting with little burr even when cutting thin sheet metal.1 products found
JPY: 4,680
USD: 29.34
-
Interior Chip SAWFor Enamel Kitcen Panel DMHK10048 DMHK-10048
Because of the use of high-hardness ultra-fine cermet tips, the cut ends will have a beautiful finish.
High precision limiting blade (prevents excessive digging into the material during cutting, prevents fluttering of the panel, and prevents blade chipping) reduces chipping on the cutting surface.1 products foundList of 【HOUSE BM Co., Ltd.】ORANGE BOOK 2018 NEW ITEMone/css/slider.css?v=03790be0f2ba82c1280907a7033cf49dabaaa7c1" as="style">
<!--@[ss-47]@-->[$1]【HOUSE BM Co., Ltd.】ORANGE BOOK 2018 NEW ITEM[/$1]一覧<!--@/[ss-47]@--> 【AXEL GLOBAL】ASONE Contact us
[HOUSE BM Co., Ltd.]ORANGE BOOK 2018 NEW ITEM
Filters
-
Cutting Blade For Plaster Board BDM10022 BDM-10022
By adding a special limiting blade, excessive cutting into the cutting material is prevented and light cutting is realized.
Cutting board surface paper can be cut cleanly by sharp angle polishing.1 products found
JPY: 2,680
USD: 16.80
-
Cutting Blade For Plaster Board BDM12528 BDM-12528
By adding a special limiting blade, excessive cutting into the cutting material is prevented and light cutting is realized.
Cutting board surface paper can be cut cleanly by sharp angle polishing.1 products found
JPY: 2,750
USD: 17.24
-
Cutting Blade For Reinforced Plaster Board BDMK10035 BDMK-10035
With the finest fine grain chips, it has excellent wear resistance for strengthening and cutting hard boards.
With 6 to 1 set of blades, it has high straightness and cuts 25% up (compared to our company conventional).1 products found
JPY: 3,420
USD: 21.44
-
Cutting Blade For Reinforced Plaster Board BDMK12542 BDMK-12542
With the finest fine grain chips, it has excellent wear resistance for strengthening and cutting hard boards.
With 6 to 1 set of blades, it has high straightness and cuts 25% up (compared to our company conventional).1 products found
JPY: 3,760
USD: 23.57
-
Chip SAWFor Galvalume Steel Plate DMG10040 DMG-10040
With a blade thickness of 1 to 2 mm, the cutting speed is fast, and the ultra-fine cermet chip type achieves stable long cuts with little wear.
Employing a deformed embedded tip, it is resistant to blade skipping, prevents excessive cutting with a limiting blade, and allows smooth cutting with little burr even when cutting thin sheet metal.1 products found
JPY: 4,240
USD: 26.58
-
Chip SAWFor Galvalume Steel Plate DMG12550 DMG-12550
With a blade thickness of 1 to 2 mm, the cutting speed is fast, and the ultra-fine cermet chip type achieves stable long cuts with little wear.
Employing a deformed embedded tip, it is resistant to blade skipping, prevents excessive cutting with a limiting blade, and allows smooth cutting with little burr even when cutting thin sheet metal.1 products found
JPY: 4,680
USD: 29.34
-
Interior Chip SAWFor Enamel Kitcen Panel DMHK10048 DMHK-10048
Because of the use of high-hardness ultra-fine cermet tips, the cut ends will have a beautiful finish.
High precision limiting blade (prevents excessive digging into the material during cutting, prevents fluttering of the panel, and prevents blade chipping) reduces chipping on the cutting surface.1 products found
JPY: 5,280
USD: 33.10
-
Interior Chip SAWFor Enamel Kitcen Panel DMHK12560 DMHK-12560
Because of the use of high-hardness ultra-fine cermet tips, the cut ends will have a beautiful finish.
High precision limiting blade (prevents excessive digging into the material during cutting, prevents fluttering of the panel, and prevents blade chipping) reduces chipping on the cutting surface.1 products found
JPY: 5,950
USD: 37.30
-
Interior Chip SAWFor Enamel Kitcen Panel DMKP10042 DMKP-10042
Because of the use of a high hardness ultra-fine grain tip, the cut end will have a beautiful finish.
Smooth cutting is possible with thin blade design.1 products found
JPY: 3,500
USD: 21.94
-
Interior Chip SAWFor Enamel Kitcen Panel DMKP12556 DMKP-12556
Because of the use of a high hardness ultra-fine grain tip, the cut end will have a beautiful finish.
Smooth cutting is possible with thin blade design.1 products found
JPY: 3,790
USD: 23.76
-
Eco Change Bit Replacement Blade (5 Pieces) EC3.4 EC-3.4
Eco Change Bit Blade Replacement Type Specialized blade replacement bit for concrete drill.
Replaceable blade type bit for 6.35 shaft type concrete drill.1 products found
JPY: 3,160
USD: 19.81
-
Eco Change Bit Replacement Blade (5 Pieces) EC3.5 EC-3.5
Eco Change Bit Blade Replacement Type Specialized blade replacement bit for concrete drill.
Replaceable blade type bit for 6.35 shaft type concrete drill.1 products found
JPY: 3,160
USD: 19.81
-
Eco Change Bit (5 Pieces) ECA3.4 ECA-3.4
Replaceable blade type bit for 6.35 shaft type concrete drill.
The replacement blade type is different from the integral concrete drill, so the running cost of replacement is reduced.1 products found
JPY: 4,500
USD: 28.21
-
Eco Change Bit (5 Pieces) ECA3.5 ECA-3.5
Replaceable blade type bit for 6.35 shaft type concrete drill.
The replacement blade type is different from the integral concrete drill, so the running cost of replacement is reduced.1 products found
JPY: 4,500
USD: 28.21
-
Eco Change Bit (5 Pieces) ECA4.3 ECA-4.3
Replaceable blade type bit for 6.35 shaft type concrete drill.
The replacement blade type is different from the integral concrete drill, so the running cost of replacement is reduced.1 products found
JPY: 4,500
USD: 28.21
-
Rechargeable Chip Saw For Woodwork JDM10022 JDM-10022
Prevents excessive biting (restricted blade design) and improves straightness.
Blade type and blade thickness design ideal for dust collecting round saw, dust preventing round saw and charging round saw.1 products found
JPY: 2,460
USD: 15.42
-
Rechargeable Chip Saw For Woodwork JDM12524 JDM-12524
Prevents excessive biting (restricted blade design) and improves straightness.
Blade type and blade thickness design ideal for dust collecting round saw, dust preventing round saw and charging round saw.1 products found
JPY: 2,530
USD: 15.86
-
Rechargeable Chip Saw For Woodwork JDMZ10042 JDMZ-10042
Since the highest quality fine grain tip is used, the cutting edge is sharper and abrasion resistance is improved.
Since the 6-to-1 set of blades (flat blades) is adopted, it has excellent straightness and can cut with high accuracy.1 products found
JPY: 3,500
USD: 21.94
-
Rechargeable Chip Saw For Woodwork JDMZ12556 JDMZ-12556
Since the highest quality fine grain tip is used, the cutting edge is sharper and abrasion resistance is improved.
Since the 6-to-1 set of blades (flat blades) is adopted, it has excellent straightness and can cut with high accuracy.1 products found
JPY: 4,160
USD: 26.08
-
Quick Adapter For Eco-Change Bit KECAA KECA-A
This is a dedicated quick adapter for Eco-change bit replaceable blade type concrete drill.
1 products found
JPY: 1,710
USD: 10.72
-
Quick Adapter For Eco-Change Bit KECAB KECA-B
This is a dedicated quick adapter for Eco-change bit replaceable blade type concrete drill.
1 products found
JPY: 1,710
USD: 10.72
-
Quick Adapter For Eco-Change Bit KECAC KECA-C
This is a dedicated quick adapter for Eco-change bit replaceable blade type concrete drill.
1 products found
JPY: 1,710
USD: 10.72
-
［Discontinued］Eco Change Bit Replacement Blade (5 Pieces) EC4.3 EC-4.3
Eco Change Bit Blade Replacement Type Specialized blade replacement bit for concrete drill.
Replaceable blade type bit for 6.35 shaft type concrete drill.1 products found
JPY: 2,750
USD: 17.24
-