Flon Chemical

PTFE All Coated with Stirring Rod (Twister Type) φ8 x 490mm and others

Flon Chemical

PTFE All Coated Large Stirring rod (open and close Blade Type) φ 10 (Total length 800 x Blade Width 150) and others

Flon Chemical

Fluorine Plastic (PTFE) Paddle Type Stirring rod φ8 x 450 L and others

Flon Chemical

PTFE All-Coated Large Stirring rod (Flat plate fixed blade type) φ 10 x 600 L and others

Flon Chemical

PTFE All-Coated Large Stirring rod (open and close Blade Type) φ 10 x 600 L　NR2201-003

Compared to agitating rods with φ8 shafts, there is less blurring when agitating, so viscous samples can be used with confidence.
Fixed blade type

Flon Chemical

PTFE 3-Blade Screw Stirring Rod 450mm and others

Flon Chemical

Stirrer Seal (Universal Stirrer Guide) TS: 24/40 φ10 and others

Flon Chemical

PTFE Stirring Rod 550mm 9.5φ x 60mm and others

Flon Chemical

For φ8 Fluororesin (PTFE) Bearing Joint for Vacuum Sealing Device (Connection Screw: R 1/2)　NR2006-001

The connecting part is screwed on, so it can be connected to a tank, container, etc.

Flon Chemical

Fluorine Resin (With Special Filler) Bearing Joint for Vacuum Seal φ8 (Mating: TS 24/40) and others

Flon Chemical

For Fluororesin (PTFE) Bearing Joint for Vacuum Seal φ 10 (Mating: TS 29/32) and others

Flon Chemical

Fluorine Resin (With Special Filler) Bearing Joint for Vacuum Seal φ 10 (Mating: TS 24/40) and others

Flon Chemical

PFA Dust Holder for Strring Rod (Saucer Inner Diameter 50 mm) and others

Flon Chemical

Fluororesin (PTFE) Stirring Impeller 3-Bladed Screw shaper (Blade Only)　NR2680-006

Screw-Shaped Stirring Blades
The blades are screw-fastened and fixed, so they can be easily detached with the included spanner

Flon Chemical

PTFE Bearing for 3-Bladed Screw Type Stirring Rods　NR2682-001

Fluororesin (PTFE) 3-blade screw-type stir bar usually comes with a PEEK material bearing, but if PEEK has poor chemical resistance, please use this PTFE bearing.

Flon Chemical

PTFE All Coated Stirring Rods with Flat Mirror (Anchor Type) (Total Length 460 x Blade Width 88) and others

Flon Chemical

PTFE All Coated Stirring Rods (A-Type 2 Blades) (Total Length 465 x Blade Width 70) and others

Flon Chemical

PTFE All Coated Stirring Rods (B-Type 2 Blades) (Total Length 485 x Blade Width 60) and others

Flon Chemical

Iron Core PTFE Coated Stirring Rods (H -1 Type) (Total Length 455 x Blade Width 70) and others

Flon Chemical

Iron Core PTFE Coated Stirring Rods (H -2 Type) (Total Length 455 x Blade Width 70) and others

Flon Chemical

Iron Centered PTFE Coated Stirring Rods (Disk Type) (Total Length 425 x Geta Width 7.5) and others

Flon Chemical

PTFE All Coated Open/Close Type Stirring Rods (2-piece Type) (Total Length 590 x Blade Width 80) and others

Flon Chemical

Iron Core PTFE Coated Stirring Rods (2-Row Type) (Total Length 565 x Blade Width 80) and others

Flon Chemical

PTFE All Coated Large Stirring Rods (Fixed Type) φ8 and others

Flon Chemical

Fluororesin (PTFE) Stirring Impeller Paddle Type (Blade Only)　NR6706-006

A standard stirring blade with 2 blades inclined at 45°. Ideal for stirring a solid liquid as it creates a radiant flow. It is also widely used for high-viscosity solutions and low-speed stirring.
Since the blade is screwed, it is easy to detach (with fastening spanner).

Flon Chemical

PTFE All Coated Stirring Rods (Neo Twister Type) φ8 x 490 Applicable Container φ 100 ~ and others

Flon Chemical

Jet 8Φ Blade chisel (PTFE + PEEK)　NR2681-006

Suitable when you want to increase the stirring effect.
The blade angle is 45°.

Flon Chemical

［Discontinued］Fluororesin (With Special Filler) Bearing Joint for Magnetic Stirrer φ8 (Mating: TS 24/40) and others

Flon Chemical

［Discontinued］Iron Core PTFE Coated Large Stirring Bar (with Blade) φ10 (Total Length 800 x Blade Width 150) and others