ASADA CORPORATION

Carbon Brush beaver 25, Pipe saw 165 s　70819

For asada pipe machine.

ASADA CORPORATION

Carbon Brush beaver 50 and others

ASADA CORPORATION

Beavers 80 AT2 and others

ASADA CORPORATION

Manual die head PT1/4-3/8, W3/8-125 and others

ASADA CORPORATION

Taper pipe thread chaser for AM1/2-3/4 steel pipe and others

ASADA CORPORATION

Pipe cutter BE25 Substitute edge beaver 25 steel pipe　AS058

Excellent sharpness and clean cut surface.
It has a long life.

ASADA CORPORATION

Super rosnick 2　ST504

It is suitable for threading work in narrow places such as extension and repair work of existing pipes.
Lightweight and small, easy to carry around to any site.

ASADA CORPORATION

Fixing nail for Nipple-Max 1/2 3/4 and others

ASADA CORPORATION

Drain cleaner E-150 and others

ASADA CORPORATION

PC wire Φ16mm x2. 3m　R72433

You can extend the wire to the desired length.　
The head can be replaced according to the cause of clogging.　

ASADA CORPORATION

Clear Scope Digital 100 and others

ASADA CORPORATION

CFC recovery Cylinder, Funnel Sensor with 6L bearer and others

ASADA CORPORATION

Vacuum Pump 4 CFM Eco　WV240

Compatible with new refrigerant (HFC) and conventional refrigerant.
With an electromagnetic oil backflow prevention valve, it prevents backflow of vacuum pump oil and prevents damage to HFC-type refrigerant equipment.

ASADA CORPORATION

Vacuum Pump TEZ8 and others

ASADA CORPORATION

R134a service can Valve　Y04100A

Double O-ring for excellent airtightness.
Since the handle is large and easy to turn, holes can be easily drilled.

ASADA CORPORATION

Ball Valve 1/4 male x1/4 male and others

ASADA CORPORATION

Different Diameter Adapter 1/4 Female x5/16 male tejime Type and others

ASADA CORPORATION

R410A Cylinder for Adapter and others

ASADA CORPORATION

Quick Adapter 45 ° 5/16 Female x1/4 male　Y19173

45 degrees fits your hand and improves workability.
For connecting ports of different diameters.

ASADA CORPORATION

Filter dryer 032 f and others

ASADA CORPORATION

Refrigerant leakage prevention agent Nye log Blue　RT201B

Since the main ingredient of Nylog is refrigerator oil, mixing it into the oil in the system has no effect.
To prevent leakage of flare surface, beetle part, gasket, screw part and O-ring.

ASADA CORPORATION

Snap Switch WD1201F and others

ASADA CORPORATION

Beavers SAW170 ECO and others

ASADA CORPORATION

Beavers SAW Cemented Carbide B165 and others

ASADA CORPORATION

Crank Scraper 16 and others

ASADA CORPORATION

Just-fit solenoid valve opener　ES705

When CFCs are collected, the solenoid valves of refrigeration and air conditioning equipment are forcibly opened to completely collect CFCs.

ASADA CORPORATION

Eco saver tetra　ES800

Supports new and conventional refrigerants (CFC, HCFC, HFC) and specified inert gases.
The newly developed 4 horizontally opposed compressors provide high-speed recovery.

ASADA CORPORATION

Eco-Cycle RC200　ES950

Regenerates refrigerant at higher speed with built-in heater + heat exchanger.
High-performance heat exchanger provides strong separation between refrigerator oil and refrigerant. (Simple Distillation Type)

ASADA CORPORATION

Beavers SAW P400　EX400

Suitable for cutting new pipes of large diameter plastic pipes.
If you use a replacement blade sold separately, you can cut and cut at the same time.

ASADA CORPORATION

Beavers SAW Cemented Carbide B150P　EX7010489

Since it is a tip saw developed exclusively for beaver SAW, it is safe with little sparks and dust.
Beautiful cut surface with no burn or burr.

ASADA CORPORATION

Beavers SAW cermet B165　EX7010497

Since it is a tip saw developed exclusively for beaver SAW, it is safe with little sparks and dust.
Beautiful cut surface with no burn or burr.

ASADA CORPORATION

Beavers SAW cermet B155V　EX7010498

Since it is a tip saw developed exclusively for beaver SAW, it is safe with little sparks and dust.
Beautiful cut surface with no burn or burr.

ASADA CORPORATION

Access Controller Roll Valve　Y18994A

Prevents refrigerant spouting during hose removal.
The valve operation allows the opening and closing of the beetle press without leaking CFCs.

ASADA CORPORATION

Flare tight 1/2 "10 pcs　FT0812

Double effect of locktight sealant and stepped copper gasket prevents refrigerant leakage from flare joint.
The sealant enters the flaw on the flare surface to fill the gap, thus preventing refrigerant leakage from the damaged flare.

ASADA CORPORATION

Flare tight 5/8 "10 pcs　FT1058

Double effect of locktight sealant and stepped copper gasket prevents refrigerant leakage from flare joint.
The sealant enters the flaw on the flare surface to fill the gap, thus preventing refrigerant leakage from the damaged flare.

ASADA CORPORATION

Flare tight 3/4 "10 pcs　FT1234

Double effect of locktight sealant and stepped copper gasket prevents refrigerant leakage from flare joint.
The sealant enters the flaw on the flare surface to fill the gap, thus preventing refrigerant leakage from the damaged flare.

ASADA CORPORATION

R407C on access controller Roll Valve　Y18994C

Prevents refrigerant spouting during hose removal.
The valve operation allows the opening and closing of the beetle press without leaking CFCs.

ASADA CORPORATION

Charging Scale CS-200　ES780

Since the measuring range is up to 200 kg, stable measurement of 120 L cylinder is possible with a large scale stand with slip prevention.
The alarm function buzzes when the specified fill value is reached.

ASADA CORPORATION

Flaring Tool　FT100

When the flare processing is completed, the handle becomes idle to prevent machining defects caused by excessive or insufficient turning.
The tip of the cone remains at the center of the copper tube, while it is eccentrically rotated to widen the copper tube, resulting in a uniform flare process.

ASADA CORPORATION

［Discontinued］No 1 Vise jaw　10403