Makita Corporation

125mm Electronic Concrete shave　PC5001C

Shave it down to the edge of the wall.
High power consumption 1400 W.

Makita Corporation

90mm Concrete Planer　PC9003

The 15° body angle is particularly comfortable for ceiling and wall work.
We recommend using a dust collector together.

Makita Corporation

Indoor/Outdoor Maker and others

Makita Corporation

Indoor/Outdoor Maker with Tripod and others

Makita Corporation

Laser Distance Measrure and others

Makita Corporation

Concrete Vibrator Motor Department chisel　VR101

Double insulation
Motor part only.

Makita Corporation

Concrete vibrator flex assembly (flex type) Φ 28 mm and others

Makita Corporation

Rechargeable Concrete Vibrator 14.4V 3.0Ah and others

Makita Corporation

Chain hoist rated load 100 kg and others

Makita Corporation

Small hoist for 20m rated load 60 kg and others

Makita Corporation

75mm High Pressure Air Nailing (Red) w/Air Dasta and others

Makita Corporation

90mm High Pressure Air Nailing (Red) w/Air Dasta　AN900HX

New Peach Magazine
Ideal for working in cramped areas or at heights

Makita Corporation

25mm Air Nailing for Japanese-style Ceilings　AN201P

Extremely thin design for a smooth Japanese-style ceiling
Trigger lock

Makita Corporation

38mm Pocket Air Nailed Interior Board　AN302P

Perform interior and exterior work easily!
Drive Depth Adjustment

Makita Corporation

32mm Pocket Air Nailed for Interior Board　AN303P

Work lightly with wooden sheet metal!
Adjusting the driving depth

Makita Corporation

50mm Air Nailing and others

Makita Corporation

65mm Air Nailing　AN611

Low center of gravity and high power! Wooden frame, concrete, steel plate (thickness 2.3 mm or less)
Remarks: Wire: 65 mm, Seat: 65 mm (wide)

Makita Corporation

50mm Air Nailing and others

Makita Corporation

90mm Air Nailing　AN902

Compact and high power!
Notes: Wire: 90 mm, N Nail: 45~90 mm *, CN Nail: 50~90 mm

Makita Corporation

90mm Air Nailing　AN921

With its powerful power, it is comfortable to hit 2×4 diagonally!
Notes: Stick: 90 mm, CN Nail: 65~90 mm

Makita Corporation

50mm Air Nailing　AN510B

Lightweight type and easy to use!
Notes: Seat: 50 mm (reverse winding), Washer nail compatible, Drive depth adjustment, Single shot/continuous drive switching, Safety device when not working Contact arm lock, Air recycling mechanism attached, Rear exhaust, Mountain drive compatible, Valley drive compatible, Plastic case attached

Makita Corporation

50mm High Pressure Air Nailing　AN510HS

Comfortable Work with Fine Diameter Nose
Remarks: Seat: 50 mm (Reverse Roll), Depth Adjustment, Automatic Switching of Single Shot/Continuous Shot, Trigger Lock, Plastic Case Included

Makita Corporation

50mm Air Nailing　AN552

Lightweight type and easy to use!
Notes: Seat: 50 mm (reverse winding)

Makita Corporation

65mm Air Nailing　AN601R

You can hit a large nail with a head diameter of 8mm!
Horizontal roofing and sling stop for great power

Makita Corporation

65mm Air Nailing　AN651

High power type that can hit concrete!
Notes: Seat: 65 mm (reverse winding)

Makita Corporation

High Pressure Floor Tacker (Red) staple, width 11.3 mm and others

Makita Corporation

50mm High Pressure Air Nailing　AF530H

The hard flooring material also has a beautiful finish. The air duster is mounted on it. It is strongly sprayed directly!
Notes: Blood Nail: 50 mm

Makita Corporation

Stapler Pin Nail 35 mm　AF351

Only 0.6 mm of nail marks!
Beautiful finish and secure, reliable work!

Makita Corporation

50mm Finished Nailing　AF502N

Standard Finishing Nailing
Notes: Finishing Nail: 50 mm, Super Finishing Nail: 50 mm

Makita Corporation

64mm Air Nailing　AF634S

With the short magazine, it's easy to beat!
Notes: Blood Nail: 64 mm

Makita Corporation

9/12mm Air Wave Nailing　AJ150

Strike a wavy nail that rests firmly with little misalignment
Notes: Wavy nail: 9/12 mm, Wavy nail width: 25 mm

Makita Corporation

Pneumatic Staplers staple width 10mm and others

Makita Corporation

Light gauge steel Tacker staple width 4 mm　AT422CA

Remarks: Staple Length: 22 mm, Staple Width (J Line): 4 mm, Interior, Furniture Woodwork, Depth adjustment, Prevention of Blanking, Prevention of Misfiring With Trigger Lock, Air Recycling Mechanism, Rear Exhaust

Makita Corporation

Stapler　HS100

Makita Corporation

Rechargeable Tacker 18V main body only staple Width 10mm and others

Makita Corporation

Rechargeable Tacker 14.4V 3.0Ah staple Width 12mm and others

Makita Corporation

Rechargeable Tacker 18V main body only staple Width 12mm and others

Makita Corporation

High pressure air screw driver (Red) 32mm connecting screw and others

Makita Corporation

Air nail puller ID Φ 3.7 mm　AKN10

Nail pulling in formwork is speedy.

Makita Corporation

Gaspin casting machine for concrete　GN420C

High power, lightweight 3.7 kg compact.
Easy removal of pin jam by detachable magazine.