O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 100 mm　14FU100

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 6 mm plate thickness, heat treatment prevents abrasion and deformation due to high Load and impact, and has low turning resistance for long term smooth use. The metal fitting legs are strongly welded with a plate thickness of 6 mm. Grease inlet is attached to the rotating metal plate and axle.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 125 mm　14FU125

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 6 mm plate thickness, heat treatment prevents abrasion and deformation due to high Load and impact, and has low turning resistance for long term smooth use. The metal fitting legs are strongly welded with a plate thickness of 6 mm. Grease inlet is attached to the rotating metal plate and axle.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 150 mm　14FU150

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 6 mm plate thickness, heat treatment prevents abrasion and deformation due to high Load and impact, and has low turning resistance for long term smooth use. The metal fitting legs are strongly welded with a plate thickness of 6 mm. Grease inlet is attached to the rotating metal plate and axle.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 200 mm　14FU200

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 6 mm plate thickness, heat treatment prevents abrasion and deformation due to high Load and impact, and has low turning resistance for long term smooth use. The metal fitting legs are strongly welded with a plate thickness of 6 mm. Grease inlet is attached to the rotating metal plate and axle.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 100 mm　34FU100

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 6 mm plate thickness, heat treatment prevents abrasion and deformation due to high Load and impact, and has low turning resistance for long term smooth use. The metal fitting legs are strongly welded with a plate thickness of 6 mm. Grease inlet is attached to the rotating metal plate and axle.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 125 mm　34FU125

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 6 mm plate thickness, heat treatment prevents abrasion and deformation due to high Load and impact, and has low turning resistance for long term smooth use. The metal fitting legs are strongly welded with a plate thickness of 6 mm. Grease inlet is attached to the rotating metal plate and axle.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 150 mm　34FU150

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 6 mm plate thickness, heat treatment prevents abrasion and deformation due to high Load and impact, and has low turning resistance for long term smooth use. The metal fitting legs are strongly welded with a plate thickness of 6 mm. Grease inlet is attached to the rotating metal plate and axle.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 200 mm　34FU200

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 6 mm plate thickness, heat treatment prevents abrasion and deformation due to high Load and impact, and has low turning resistance for long term smooth use. The metal fitting legs are strongly welded with a plate thickness of 6 mm. Grease inlet is attached to the rotating metal plate and axle.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 100 mm　H14FU100

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 125 mm　H14FU125

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 200 mm　H14MC200

Strong MC nylon wheels.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 250 mm　H14MC250

Strong MC nylon wheels.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 100 mm　H14PK100

Phenol resin wheels with wavy fibers.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 125 mm　H14PK125

Phenol resin wheels with wavy fibers.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 100 mm　H34FU100

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 125 mm　H34FU125

It is a wheel made by gluing urethane to a rim made of cast iron.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 200 mm　H34MC200

Strong MC nylon wheels.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 250 mm　H34MC250

Strong MC nylon wheels.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 100 mm　H34PK100

Phenol resin wheels with wavy fibers.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 125 mm　H34PK125

Phenol resin wheels with wavy fibers.
Metal fittings use 8 mm plate thickness, iron treatment prevents abrasion and deformation due to high Load and impact, and the turning resistance is small and can be used smoothly for a long time. The turning metal fittings and wheels have a grease inlet attachment. The metal fitting legs are strongly welded with a plate thickness of 6 mm.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 200 mm　HX14MC200

Strong MC nylon wheels.
Since the metal fitting turning part S45C is hot forged, and the top plate and king pin are integrally formed, it is strong against high Load and impact. Grease inlet is attached to the rotating metal plate and axle. The turning part uses 5117 thrust bearings and 6206ZZ ball bearings. The metal fitting leg is 12 mm thick with strong welding.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 250 mm　HX14MC250

Strong MC nylon wheels.
Since the metal fitting turning part S45C is hot forged, and the top plate and king pin are integrally formed, it is strong against high Load and impact. Grease inlet is attached to the rotating metal plate and axle. The turning part uses 5117 thrust bearings and 6206ZZ ball bearings. The metal fitting leg is 12 mm thick with strong welding.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 300 mm　HX14MC300

Strong MC nylon wheels.
Since the metal fitting turning part S45C is hot forged, and the top plate and king pin are integrally formed, it is strong against high Load and impact. Grease inlet is attached to the rotating metal plate and axle. The turning part uses 5117 thrust bearings and 6206ZZ ball bearings. The metal fitting leg is 12 mm thick with strong welding.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 200 mm　HX34MC200

Strong MC nylon wheels.
Since the metal fitting turning part S45C is hot forged, and the top plate and king pin are integrally formed, it is strong against high Load and impact. Grease inlet is attached to the rotating metal plate and axle. The turning part uses 5117 thrust bearings and 6206ZZ ball bearings. The metal fitting leg is 12 mm thick with strong welding.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 250 mm　HX34MC250

Strong MC nylon wheels.
Since the metal fitting turning part S45C is hot forged, and the top plate and king pin are integrally formed, it is strong against high Load and impact. Grease inlet is attached to the rotating metal plate and axle. The turning part uses 5117 thrust bearings and 6206ZZ ball bearings. The metal fitting leg is 12 mm thick with strong welding.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 300 mm　HX34MC300

Strong MC nylon wheels.
Since the metal fitting turning part S45C is hot forged, and the top plate and king pin are integrally formed, it is strong against high Load and impact. Grease inlet is attached to the rotating metal plate and axle. The turning part uses 5117 thrust bearings and 6206ZZ ball bearings. The metal fitting leg is 12 mm thick with strong welding.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 50 mm　LS14MC50

Strong cast nylon wheels.
Since the rotating part of the metal fitting has undergone heat treatment, it can be used smoothly for a long time to prevent friction and deformation due to high Load and impact, and there is no deformation of the wheel even when fixed under high Load for a long time. Two types of plastic and cast nylon wheels. Wheels are roller bearings, inner wheels are heat-treated, and a grease inlet is attached to the turning part.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 65 mm　LS14MC65

Strong cast nylon wheels.
Since the rotating part of the metal fitting has undergone heat treatment, it can be used smoothly for a long time to prevent friction and deformation due to high Load and impact, and there is no deformation of the wheel even when fixed under high Load for a long time. Two types of plastic and cast nylon wheels. Wheels are roller bearings, inner wheels are heat-treated, and a grease inlet is attached to the turning part.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 75 mm　LS14MC75

Strong cast nylon wheels.
Since the rotating part of the metal fitting has undergone heat treatment, it can be used smoothly for a long time to prevent friction and deformation due to high Load and impact, and there is no deformation of the wheel even when fixed under high Load for a long time. Two types of plastic and cast nylon wheels. Wheels are roller bearings, inner wheels are heat-treated, and a grease inlet is attached to the turning part.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 50 mm　LS14PK50

Phenol resin wheel with wavy fiber.
Since the rotating part of the metal fitting has undergone heat treatment, it can be used smoothly for a long time to prevent friction and deformation due to high Load and impact, and there is no deformation of the wheel even when fixed under high Load for a long time. Two types of plastic and cast nylon wheels. Wheels are roller bearings, inner wheels are heat-treated, and a grease inlet is attached to the turning part.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 65 mm　LS14PK65

Phenol resin wheel with wavy fiber.
Since the rotating part of the metal fitting has undergone heat treatment, it can be used smoothly for a long time to prevent friction and deformation due to high Load and impact, and there is no deformation of the wheel even when fixed under high Load for a long time. Two types of plastic and cast nylon wheels. Wheels are roller bearings, inner wheels are heat-treated, and a grease inlet is attached to the turning part.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster 75 mm　LS14PK75

Phenol resin wheel with wavy fiber.
Since the rotating part of the metal fitting has undergone heat treatment, it can be used smoothly for a long time to prevent friction and deformation due to high Load and impact, and there is no deformation of the wheel even when fixed under high Load for a long time. Two types of plastic and cast nylon wheels. Wheels are roller bearings, inner wheels are heat-treated, and a grease inlet is attached to the turning part.

O.H.INDUSTRIAL Co., Ltd.

Flexible Wheels/Rubber Flexible Allowable Load 30 kg and others

O.H.INDUSTRIAL Co., Ltd.

Universal Wheel/Rubber Wheel: Rubber Allowable Load (kg): 80 Wheel Diameter D (mm): 75 and others

O.H.INDUSTRIAL Co., Ltd.

Fixed Vehicle/Rubber Wheels: Rubber Allowable Load (kg): 80 Wheel Diameter D (mm): 75 and others

O.H.INDUSTRIAL Co., Ltd.

Universal Wheel/Urethane Wheel: Urethane Allowable Load (kg): 120 Wheel Diameter D (mm): 75 and others

O.H.INDUSTRIAL Co., Ltd.

Fixed Vehicle/Urethane Wheels: Urethane Allowable Load (kg): 120 Wheel Diameter D (mm): 75 and others

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster Allowable Load (kg): 600 Wheel Diameter D (mm): 101 Mounting Height H (mm): 143　14PK-100

The rotating part of the metal fitting uses 6mm thick steel plate and is heat-treated to prevent abrasion and deformation due to high Load and impact. In addition, the swirl resistance is small and can be used smoothly for a long time.
A grease inlet is attached to the swivel metal plate and axle.

O.H.INDUSTRIAL Co., Ltd.

Super Strong Caster Allowable Load (kg): 350 Wheel Diameter D (mm): 101 Mounting Height H (mm): 143 and others

O.H.INDUSTRIAL Co., Ltd.

［Discontinued］Press Caster Free 100 mm　OH35J100

Steel free fitting.