[LOBTEX CO., LTD.]Work Tools, Supplies
-

Tool Set[15]
-

Wrench, Spanner, Puller[173]
-

Driver, Hexagon Key Wrench[1]
-

Pliers, Nipper[78]
-

Scissors/Cutter/Sheet Metal Tool[18]
-

Hammer, Carved Seal, Punch[1]
-

Clamp, Vise[39]
-

Electric Facilities Tool[50]
-

Water/Air Piping Tool[33]
-

Tool Box, Tool Bag[3]
-

Electric/Hydraulic Tool[10]
-

Pneumatic-tool[2]
-

Wrench, Spanner, Puller[7]
-

Cutting Equipment[38]
-

Grinding Abrasive Product[94]
Filters
- by Product group
- by Product
Sort by:
-
Hexagonal Socket 4.0mm Bayonet angle 6.35mm and others
21 products found
JPY: 494-
USD: 3.10-
-
12 Square Socket 8.0mm Bayonet angle 9.5mm and others
23 products found
JPY: 556-
USD: 3.49-
-
Equistension bar 1/4 x 75mm and others
2 products found
JPY: 950-
USD: 5.96-
-
Cloths bar 250mm CB1225
Can be attached to a nut spinner handle and used as a T-shaped handle.
1 products found
JPY: 494
USD: 3.10
-
Driver-play Handle 1/4 DH2150
The grip end has a slot and can be used as an extension bar.
Screwdriver socket wrench handle.1 products found
JPY: 1,363
USD: 8.55
-
Monkeywrencs maximum Mouth width; 20mm Length; 160mm and others
2 products found
JPY: 2,640-
USD: 16.56-
-
Hybrid monkeywrencs maximum Mouth width; 24mm Length; 150mm and others
3 products found
JPY: 2,350-
USD: 14.74-
-
Bolt Clipper 1050mm and others
8 products found
JPY: 2,180-
USD: 13.68-
-
Bare Crimp terminal for mini crimp Usage range 0.3・0.5・1.25・2.3.5・5.5 and others
2 products found
JPY: 5,950-
USD: 37.32-
-
Tube Cutter Substitute round blade (flexible Pipe) K605
Replacement blade for flexible pipe cutter.
For flexible pipes.1 products found
JPY: 1,688
USD: 10.59
-
Tube Cutter Substitute round blade (copper pipe) and others
2 products found
JPY: 1,200-
USD: 7.53-
-
Manual hydrautic type freisserding Two FSH20
If the tip of the flaring pipe is set to match the surface of the gauge, flaring and swaging can be performed quickly with hydraulic power.
For both flaring and swaging.1 products found
JPY: 83,356
USD: 522.87
-
Anguirus skeleton Yellow 250mm WP250DY
With Anguillas skeleton grip.
This six-color grip is convenient for tool management at each workplace.1 products found
JPY: 2,590
USD: 16.25
-
Hydraulic Cylinder and others
6 products found
JPY: 1,263-
USD: 7.92-
-
Flasher iron, Stainless steel Common Type 110mm FX110A
The use of new alloy chips with excellent heat resistance and abrasion resistance has resulted in remarkable sharpness, long life, and a clean cut.
For cutting general mild steel materials (iron and aluminum) and stainless steel materials (SUS304).1 products found
JPY: 5,163
USD: 32.39
-
Stainless steel sheet 80mm and others
4 products found
JPY: 13,019-
USD: 81.67-
-
Flasher (aluminum) 80mm and others
3 products found
JPY: 5,750-
USD: 36.07-
-
Diamond Wheel laser (dry) 180mm and others
3 products found
JPY: 25,960-
USD: 162.84-
-
Diamond Wheel NEW Leather (dry) 305mm and others
2 products found
JPY: 35,180-
USD: 220.68-
-
Diamond Wheel web laser (dry) 260mm hole diameter 20mm and others
5 products found
JPY: 36,620-
USD: 229.71-
-
Diamond Wheel Sky Wave Extra (dry) 153mm and others
3 products found
JPY: 18,840-
USD: 118.18-
-
Diamond Wheel (dry) U Cutter 105mm U105
Because of the ideal U-shaped grinding cross section, caulking material can easily enter the groove when repairing cracks in concrete and mortar such as on walls and rooftops, or when performing joint work, and the adhesive area is large and reliable.
Suitable for repairing cracks in concrete and mortar.1 products found
JPY: 34,860
USD: 218.67
-
Diamond Wheel V Cutter 108mm V105
Since the tip has a V-shaped tapered shape, cracks are easily bitten, and even if the crack is complicated, it can be easily cut around every corner of the wall without extra damage, and renovation work time can be greatly shortened.
For repairing cracks in concrete and mortar.1 products found
JPY: 27,890
USD: 174.95
-
Welding Diamond Wheel 128mm and others
2 products found
JPY: 11,525-
USD: 72.29-
-
Electrodeposition Diamond Wheel Nitrogen siding dedicated 80mm and others
3 products found
JPY: 8,838-
USD: 55.44-
-
Diamond Civil blade 10 inch 22 pie and others
14 products found
JPY: 27,475-
USD: 172.34-
-
Diamond civil engineering blade (wet) 305mm and others
2 products found
JPY: 33,500-
USD: 210.14-
-
Diamond Cup wheel Dry luxury Single Cup and others
2 products found
JPY: 23,240-
USD: 145.78-
-
Precision diamond File 8 set angle S8-K
Diamond abrasive grains are evenly distributed on the file base metal, and the sharp cutting edge of the abrasive grains is firmly held and protruded to the surface, thus maintaining a long life with the initial sharp sharpness.
Select the type (for precision; For ironwork such as finish grinding, correction, grinding, etc.: rough grinding, heavy grinding requiring rigidity, etc.), type (5, 8, 10, 12 pcs: size unit), or shape (Flat: For Plane, Half Round: For R Part, Round: For Round Hole, Corner: For Square Hole, Triangle: For Each Part) that suits your application.1 products found
JPY: 2,669
USD: 16.74
-
Engineers diamond File 5 set angle and others
6 products found
JPY: 2,319-
USD: 14.55-
-
Zet Flasher for Sheet Metal 110 mm FB110
Smooth cutting with thin blade.
Less burrs, no post-processing required1 products found
JPY: 4,131
USD: 25.91
-
Punch Die (Sag) 20 x 20 K2020
Square Punch Die for Shrimp Puncher/LP104AP/BP
Shrimp Punch Accessories1 products found
JPY: 34,775
USD: 218.13
-
Punch Die (Sag) 30 x 30 K3030
Square Punch Die for Shrimp Puncher/LP104AP/BP
Shrimp Punch Accessories1 products found
JPY: 45,000
USD: 282.27
-
Punch Die (Sag) 40 x 40 K4040
Square Punch Die for Shrimp Puncher/LP104AP/BP
Shrimp Punch Accessories1 products found
JPY: 56,250
USD: 352.84
-
Chisel (For CCM) 12 mm MC12
For chipping work of curtain walls, PC panels, joints, expansion joints, steel plate joints, glass, around sashes, around pipes, irrigation canals, etc.
1 products found
JPY: 2,913
USD: 18.27
-
Chisel (For CCM) 15 mm MC15
For chipping work of curtain walls, PC panels, joints, expansion joints, steel plate joints, glass, around sashes, around pipes, irrigation canals, etc.
1 products found
JPY: 3,900
USD: 24.46
-
Chisel (For CCM) 7 mm MC7
For chipping work of curtain walls, PC panels, joints, expansion joints, steel plate joints, glass, around sashes, around pipes, irrigation canals, etc.
1 products found
JPY: 1,938
USD: 12.16
-
Diamond Wheel R-110-1.5 R110
1 products found
JPY: 11,170
USD: 70.07
-
Punch Die (Sag) 45 x 45 and others
2 products found
JPY: 64,513-
USD: 404.67-
-
Diamond Wheel Laser (ALC Only) 358 mm and others
2 products found
JPY: 71,010-
USD: 445.43-
