Kiriyama glass Co.

Kiriyama Safety Mantle Heater, MONOHEAT and others

Kiriyama glass Co.

vacuum trap　V77C-5

It is installed between the experimental equipment and the vacuum pump, and the outer tube is dipped into the refrigerant to catch moisture and various papers.

Kiriyama glass Co.

exhaust trap　W77D-6

It circulates neutralizing liquid and absorbs exhaust gas as an umbrella water film in the trap.
Soluble exhaust should be dissolved, while insoluble or solid (smoky) exhaust should be mixed with water before flushing.

Kiriyama glass Co.

Trap　G77E-2

Put the dry ice-acetone solution into the inner tube of the central trap of the apparatus, introduce the sample gas from the nozzle at the lower part of the apparatus, and extract the dried gas from the upper nozzle.
Moisture in the sample gas freezes and sticks to the outside of the trap.

Kiriyama glass Co.

Minicatars (specimen dryer) and others

Kiriyama glass Co.

Special lid and others

Kiriyama glass Co.

Desiccant cap　DE78-1-5

The inset type is easy to remove.

Kiriyama glass Co.

drying room and others

Kiriyama glass Co.

sample stand　DE78-1-8

It is made of corrosion-resistant material.

Kiriyama glass Co.

suction cock and others

Kiriyama glass Co.

freeze dryer　DE78-2-1

Prepare the sample in 6, put the dry ice-acetone solution into the inner tube of the central trap, and open the upper cock 12 connected to the vacuum pump to create a high vacuum inside the device.
Water evaporates from the sample due to sublimation and drying proceeds.

Kiriyama glass Co.

cooler　DE78-2-11

This is an instrument for freeze-drying. Put dry ice and acetone into the center tube and gently reduce pressure from the branch tube at the side.

Kiriyama glass Co.

closed plug　DE78-2-13

It is thick and sturdy.

Kiriyama glass Co.

Fluorine Plastic joint seal　DE78-2-14

Prevents the round-bottom flask from sticking.

Kiriyama glass Co.

specimen dryer and others

Kiriyama glass Co.

Abdelhalden sample dryer and others

Kiriyama glass Co.

branch with cock　DE79-1

It is thick and sturdy.

Kiriyama glass Co.

T-shaped type branch with cock　DE79-2

It is thick and sturdy.

Kiriyama glass Co.

Sample container (Vertical) and others

Kiriyama glass Co.

Kiriyama Safety Mantle Heater, Controller for MONOHEAT　SH-CO15A

Outputs at intervals to maintain a constant temperature.

Kiriyama glass Co.

［Discontinued］solvent pumps　ILC-135-1

You can disassemble and assemble by yourself with a simple structure.

Kiriyama glass Co.

［Discontinued］Damper　ILC-135-2

A nitrogen gas damper that erases pulses with a hydraulic pressure of 7~10kgcm2.

Kiriyama glass Co.

［Discontinued］filter tube　ILC-135-3

It is a set of tubes that pass a filter through a solvent container to suck and to return excess solvent.

Kiriyama glass Co.

［Discontinued］connecting tube　ILC-135-4

A tube that connects the pump and damper.

Kiriyama glass Co.

［Discontinued］Solvent pumps System　ILC-135-10

This pump has a simple structure and can be disassembled and assembled by yourself. It was designed for the purpose of understanding the mechanism and being able to use it freely. After obtaining it, we thought it would not be idle due to troubles in various places.
Therefore, the mechanism is completely bare and the exterior is completely made, which makes it cheaper.