TRUSCO NAKAYAMA CORPORATION

Endmill Protection Cap (Shaft diameter 6mm x Length 40mm, 10 Pieces) and others

TRUSCO NAKAYAMA CORPORATION

Step Drill (Hexagon Socket Head Bolt M14, Small diameter 16.0 × Large diameter 23.0 × Step length 35mm) and others

TRUSCO NAKAYAMA CORPORATION

Drill Case (13 Pieces) and others

TRUSCO NAKAYAMA CORPORATION

Tap Pilot Hole Drill Case (21 Pieces)　C-21

When the lid is opened, the drill automatically stands up and is very convenient to take out.
You can stack them.

TRUSCO NAKAYAMA CORPORATION

HSS Drill (Fine Axis, 6.5, 7.0 × Blade length 35 x Total length 75mm) and others

TRUSCO NAKAYAMA CORPORATION

HSS Drill (Fine Axis, 10, 11.0 × Blade length 50 x Total length 90mm) and others

TRUSCO NAKAYAMA CORPORATION

HSS Drill (Fine Axis, 13 Type, Φ14.0 × Blade length 85 × Total length 140mm) and others

TRUSCO NAKAYAMA CORPORATION

HSS Drill (Hex-Axis, Iron Works, Φ2.6 × Blade length 30 × Total length 81mm) and others

TRUSCO NAKAYAMA CORPORATION

Cobalt HSS Drill (Hex-Axis, Φ1.5 x Blade length 64 x Total length 18mm) and others

TRUSCO NAKAYAMA CORPORATION

Step Drill (3 Blades, Ti Coating, Φ5 to 27mm, Number of Steps: 12, Step Width: 3.0 [2]mm) and others

TRUSCO NAKAYAMA CORPORATION

Step Drill (2 Blades, For Electrical Equipment, Ti Coating, Φ15 to 28mm, Number of Steps: 8, Step Width: 3.5mm) and others

TRUSCO NAKAYAMA CORPORATION

Step Drill (2 Blades, Black Oxide Coating, Φ5 to 21mm, Number of Steps: 9, Step Width: 5mm) and others

TRUSCO NAKAYAMA CORPORATION

Hex Axis Adapter (For NiceMighty)　TNM-HEX

Convert Nice Mighty Step Drill (φ10 Shank) to Hex Shaft (6.35 mm) with One Touch.
The adapter hexagonal shaft side uses a commercially available driver bit. (Standard Included) The driver bit is included in the shank section. When the shaft is broken, it can be replaced with a commercially available driver bit with one touch.

TRUSCO NAKAYAMA CORPORATION

SDS One-Touch Adapter (Shank Diameter Φ10)　TNM-SDS

The shank of Nice Mighty Step Drill (φ10 shank) can be converted to SDS shank with one touch.
Supports SDS plus drill.

TRUSCO NAKAYAMA CORPORATION

Extension bar (For Step Drill, Shank Diameter Φ10 × Total length 350mm) and others

TRUSCO NAKAYAMA CORPORATION

Step Drill (Hex-Axis, 3 Blades, Ti Coating, Φ5 to 19mm, Number of Steps: 9, Step Width: 3 (3.5,mm) and others

TRUSCO NAKAYAMA CORPORATION

Step Drill (Hex-Axis, 2 Blades, for electrical equipment, Ti Coating, Φ5 to 19mm, Number of Steps: 9, Step Width: 3mm) and others

TRUSCO NAKAYAMA CORPORATION

Step Drill (Hex-Axis, 2 Blades, Ti Coating, Φ4 to 12mm, Number of Steps: 5, Step Width: 5mm) and others

TRUSCO NAKAYAMA CORPORATION

Step Drill (Hex-Axis, 2 Blades, Ti Coating, Φ4 to 12mm, Number of Steps: 9, Step Width: 5mm) and others

TRUSCO NAKAYAMA CORPORATION

Step Drill (Hex-Axis, 2 Blades, resin, Φ40 to 55mm, Number of Steps: 10, Step Width: 2.5 (5,mm)　NMS-55P

The hexagonal shaft can be attached to the impact driver with one touch.
Suitable for hole diameter expansion and correction of resin materials, and for drilling temporary piping and rain gutters.

TRUSCO NAKAYAMA CORPORATION

Spiral Step Drill (2 Blades, Ti Coating, Driver Bit Type, Φ5 to 27mm, Number of Steps: 11, Step Width: 3 (2,mm) and others

TRUSCO NAKAYAMA CORPORATION

Carbide Hole Cutter (Stainless Steel, 14mm) and others

TRUSCO NAKAYAMA CORPORATION

TSL Hole Cutter (Φ12mm) and others

TRUSCO NAKAYAMA CORPORATION

TCL Hole Cutter (Hex-Axis, Φ15mm) and others

TRUSCO NAKAYAMA CORPORATION

E-Type Hole Cutter (Φ10.5mm) and others

TRUSCO NAKAYAMA CORPORATION

Diamond Core Drill (Φ10mm) and others

TRUSCO NAKAYAMA CORPORATION

Concrete Drill (Vibration Drill, Straight Shank Φ2.5 x Blade length 50) and others

TRUSCO NAKAYAMA CORPORATION

Concrete Drill (Vibration Drill, Long Straight Shank Φ3.4 x Blade length 90) and others

TRUSCO NAKAYAMA CORPORATION

Concrete Drill (Vibration Drill, 3.4mm 5 Pieces) and others

TRUSCO NAKAYAMA CORPORATION

Concrete Drill (Long 3.4 m 3 pieces ) and others

TRUSCO NAKAYAMA CORPORATION

Drill Bit (Hex-Axis, Rechargeable Electric Driver, 2.5 x Blade length 37) and others

TRUSCO NAKAYAMA CORPORATION

Drill Bit (Porcelain Tiles, Rechargeable Electric Driver, Shank Diameter: 6.35 × Φ3.0) and others

TRUSCO NAKAYAMA CORPORATION

Concrete Drill (Lightweight Hammer Drill, SDSplus Shank Φ3.4 x Blade length 45 x Total length 110) and others

TRUSCO NAKAYAMA CORPORATION

Concrete Drill (Lightweight Hammer Drill Set, SDS Shank, Φ3.4 x Blade length 45 x Total length 110) and others

TRUSCO NAKAYAMA CORPORATION

Concrete Drill Set (Lightweight Hammer Drill, Long Type, SDS Shank, Φ3.4 x Blade length 100 x Total length 160) and others

TRUSCO NAKAYAMA CORPORATION

Concrete Drill (Lightweight Hammer Drill, Φ6.0 x Blade length 100 x Total length 160) and others

TRUSCO NAKAYAMA CORPORATION

Circle Cutter (Iron Works) and others

TRUSCO NAKAYAMA CORPORATION

Spiral Tap (M3 x 0.5, Screw Length: 18, Precision: JIS 2 Class) and others

TRUSCO NAKAYAMA CORPORATION

Point Tap (Metric Thread) M3x0 5 Screw Length: 18 Accuracy: JIS class and others

TRUSCO NAKAYAMA CORPORATION

Hand Tap to HSS-E M3x0 5 Screw Length: 18 Accuracy: JIS class and others