Features

• Introducing an inexpensive kit that can easily use knurled nuts.
• Blind nuts combine the advantages of both nuts and rivets, and can be easily applied from one side to thin plates that are difficult to tap, closed sections such as pipes and square pipes that cannot reach the back side, and plastic plates that cannot be welded.
• Do not over-tighten. It may damage the thread part of the shrimp rollet nut.
• Use within the proper caulking plate thickness of shrimp rollet nut.
• If the proper crimping plate thickness is exceeded, the performance will not be satisfactory.
• Pay attention to the pilot hole diameter. If it is too large, it may cause looseness or rattling.
• "Quick Nutter" is for the shrimp rollet nut included in the package. Other blind nuts may not work.
• "Hitto Nutter" is a simple blind nut mounting tool.
• Steel Nut NSD4MR x 10
• Nutter Body for M4 x 1
• Mandrel with Hex Hole (Opposite Side 3 mm) x 1
• The dedicated nutter body has a stopper rubber that prevents it from falling off the wrench during work.
• Items to be prepared: Opposite Side 17 mm Wrench (Box Wrench Recommended), Hex Wrench (Opposite Side 3~5 mm)