Spec

• Shape/Structure: General-Purpose Vertical Type
• Actuator: Center Roller/Lever Shape φ17.5 x 7, Stainless Steel Sintered Roller, R38
• Electrical rating: 30 VDC 4 A
• Contact configuration: 1c
• loads: general loads
• Opening/Closing Capacity (DC): Resistance Load: DC30 V4 A, Lamp Load: DC30 V2 A, Induction Load: DC30 V3 A, Motor Load: DC30 V3 A
• Allowable inrush current: normally closed circuit: 20 A maximum, normally open circuit: 10 A maximum
• Operation indicator lamp: LED, non-operation point lamp, 30 VDC, leakage current: approx. 1.7 mA
• ground terminal: with ground wire
• Cable Specifications: VCTF, 4 Cores, 5 m, Nominal Cross-Sectional Area: 0.75 mm**2, Finished Diameter: φ7.6
• Ambient Temperature Range: In Use: – 10~70°C (However, it should not freeze.)
• Ambient humidity range: 35~95%RH
• Permissible Operation Frequency: Electrical: 30 times/min or less, Mechanical: 120 times/min or less
• Contact resistance (initial value): 400 mΩ or less
• Insulation Resistance: 100 MΩ or More (at 500 VDC Mega)
• Withstand voltage: Same pole terminal: 1000 VAC 50/60Hz 1min, Charged metal part and ground: 1500 VAC 50/60Hz 1min, Terminal and non-charged metal part: 1500 VAC 50/60Hz 1min
• Impulse breakdown voltage: 2.5 kV between charged metal and ground, 2.5 kV between each terminal and non-charged metal
• Durability: Electrical: 200,000 times or more (125 VAC 5 A), Mechanical: 10 million times or more
• Vibration Resistance: Malfunction: 10~55 Hz Dual Amplitude 1.5 mm
• Shock Resistance: Durability: Max. 1000 m/s**2, Malfunction: Max. 500 m/s**2
• Protection Structure: IP67
• Electrostatic Protection Class: Class I with Ground Wire
• Force required for operation (OF): nominal maximum 6.67 N
• Return force (RF): nominal minimum 1.47 N
• Motion to motion (PT): acceptance value 10 +/- 3 degrees
• Motion of hysteresis (MD): nominal maximum 3 deg.
• Movement after operation (OT): nominal minimum 50 degrees
•