Spec

• Actuator: Hinge Roller Lever Shape φ4.8 x 4.8, Stainless Steel Lever, Stainless Steel Roller
• Contact Configuration: 1c (Single Pole Double Throw Type), Rivet, Silver Alloy
• Contact spacing (standard): 1.0 mm
• Terminal Specifications: Soldering Terminal
• loads: general loads
• Rated current: 15 A
• Opening Capacity (AC): Resistive Load: 250 VAC 15 A
• Opening/Closing Capacity (DC): Resistive Load: 125 VDC 0.6 A, 250 VDC 0.3 A
• Allowable inrush current: normally closed circuit: 36 A maximum, normally open circuit: 36 A maximum
• Ambient temperature range: -25~150°C 60%RH or less (Do not freeze or dew condense.)
• Ambient humidity range: 85%RH or less at 5~35°C
• Permissible frequency of operation: Electrical: 60 times/minute or less
• Contact resistance (initial value): 15 mΩ or less
• Insulation resistance: 100 MΩ or more (with 500 VDC insulation resistance meter)
• Withstand voltage: Separator used, Same pole terminal: 1000 VAC 50/60Hz 1min, Charged metal part and ground: 1500 VAC 50/60Hz 1min, Terminal and non-charged metal part: 1500 VAC 50/60Hz 1min
• Durability: Electrical: 20,000 times or more (30 times/min), Mechanical: 50 million times or more (60 times/min)
• Protective Structure: Heat-Resistant IP40
• Electrostatic Protection Class: Class I
• Tracking characteristics (PTI): 175
• Force required for operation (OF): nominal maximum 1.23 N
• Return force (RF): nominal minimum 0.14 N
• Motion to Motion (PT): Standard Maximum 4.0 mm
• Movement after operation (OT): nominal minimum 1.6 mm
• Hydraulic Motion (MD): Standard Maximum 1.5 mm
• Operating Position (OP): Standard 19.5~21.9 mm
•