Spec

• Actuator: Pin-Push-Button Type
• Contact Configuration: 1c (Single Pole Double Throw Type), Rivet, Silver Alloy
• Contact spacing (standard): 0.5 mm
• Terminal Specifications: Soldering Terminal
• loads: general loads
• Rated current: 10.1 A
• Opening Capacity (AC): Resistive Load: 250 VAC 10.1 A
• Allowable inrush current: normally closed circuit: 20 A maximum, normally open circuit: 15 A maximum
• Ambient temperature range: -25~85°C 60%RH or less
• Ambient humidity range: 85%RH or less at 5~35°C
• Allowable operating speed: 0.1 mm/s to 1 m/s
• Permissible Operation Frequency: Electrical: 60 times/min or less, Mechanical: 400 times/min or less
• Contact resistance (initial value): 30 mΩ or less
• Insulation resistance: 100 MΩ or more (with 500 VDC insulation resistance meter)
• Withstand voltage: Separator used, Same pole terminal: 1000 VAC 50/60Hz 1min, Charged metal part and ground: 1500 VAC 50/60Hz 1min, Terminal and non-charged metal part: 1500 VAC 50/60Hz 1min
• Durability: Electrical: 50,000 times or more (30 times/min), Mechanical: 10 million times or more (60 times/min)
• Protection Structure: IP40
• Weight: about 1.6 g
• Force required for operation (OF): nominal maximum 1.47 N
• Return force (RF): nominal minimum 0.25 N
• Motion to Motion (PT): Standard Maximum 0.7 mm
• Movement after operation (OT): nominal minimum 0.4 mm
• Hydraulic Motion (MD): Standard Maximum 0.1 mm
• Operating Position (OP): Standard 8.15~8.65 mm
•