Spec

• Actuator: Rotating Lever, Counterclockwise (CCW)
• Contact Configuration: 1c (Single Pole Double Throw Type), Rivet, Silver Alloy
• Contact spacing (standard): 0.5 mm
• Terminal Specifications: #205 Tab Terminal
• loads: general loads
• Rated current: 5A
• Opening Capacity (AC): Resistive Load: 125 V5 A AC, 250 V5 A AC
• Allowable inrush current: Normally closed circuit: 15 A maximum, Normally open circuit: 7 A maximum
• Ambient temperature range: -25~80°C 60%RH or less (Do not freeze or dew condense.)
• Ambient humidity range: 85%RH or less at 5~35°C
• Allowable operating speed: 1~360 deg./s
• Permissible Operation Frequency: Electrical: 60 times/min or less, Mechanical: 240 times/min or less
• Contact resistance (initial value): 20 mΩ or less
• Insulation resistance: 100 MΩ or more (with 500 VDC insulation resistance meter)
• Withstand voltage: Same pole terminal: 600 VAC 50/60Hz 1min, Charged metal part and ground: 1500 VAC 50/60Hz 1min, Terminal and non-charged metal part: 1500 VAC 50/60Hz 1min
• Durability: Electrical: 100,000 times or more (30 times/min), Mechanical: 10 million times or more (60 times/min)
• Protection Structure: IP40
• Weight: about 10 g
• Force required for operation (OF): nominal maximum 0.5mN.m
• Return force (RF): nominal minimum 0.06mN.m
• Motion to Motion (PT): Standard Maximum 21°
• Movement after operation (OT): nominal minimum 17 degrees
• Hydraulic motion (MD): 3 degrees min.
• Free position (FP): Standard 12~18 deg.
• Total movement (TT): nominal minimum 38 deg.
•