Spec

• protective structures: flux resistance
• Terminal Structure: Terminal for Printed Circuit Boards
• Coil rating: 24 VDC 8.3 mA
• Coil Resistance: 2880 Ω
• Operating voltage (set voltage): 70% or less
• Return voltage (reset voltage): 70% or less
• Maximum Allowable Voltage: 160% (23°C)
• Set coil: Approx. 200 mW
• Reset ill: about 200 mW
• Rated load: AC250 V8 A (resistive load), AC250 V 3.5 A (inductive load (cosφ=0.4)), DC30 V8 A (resistive load), DC30 V 3.5 A (inductive load (L/R=7 ms))
• Maximum contact voltage: 380 VAC, 125 VDC
• Maximum contact current: AC: 8 A, DC: 8 A
• Maximum open/close capacity: 2000VA (resistive load), 875VA (inductive load (cosφ=0.4)), 240 W (resistive load), 170 W (inductive load (L/R=7 ms))
• Contact Configuration: 1a1b
• Contact Mechanism: Single
• Contact Material: Ag Alloy (Cd-Free Material)
• Contact Resistance: 30 mΩ or Less (DC5 V1 A Voltage Drop Method)
• Set, Reset Minimum Pulse Width: 20 ms (23°C)
• Operation time: 10 ms or less
• Return time: 10 ms or less
• Insulation Resistance: Between Coil and Contact: 1000 MΩ or More (With 500 VDC Insulation Resistance Meter), Same Pole Contact: 1000 MΩ or More (With 500 VDC Insulation Resistance Meter), Different Pole Contact: 1000 MΩ or More (With 500 VDC Insulation Resistance Meter)
• Withstand voltage: between coil and contact: 2000 VAC 50/60Hz 1min, same pole contact: 1000 VAC 50/60Hz 1min, different pole contact: 2000 VAC 50/60Hz 1min
• Vibration Resistance (Durability): 10~55 to 10 Hz Single Amplitude 0.75 mm (Double Amplitude 1.5 mm)
• Vibration Resistance (Malfunction): 10~55 to 10 Hz Single Amplitude 0.75 mm (Double Amplitude 1.5 mm)
• Impact Resistance (Durability): 1000 m/s**2
• Shock resistance (malfunction): 100 m/s**2
• Durability (mechanical): 50 million times or more (opening/closing frequency 18,000 times/h)
• Durability (electrical): 100,000 times or more (Rated load, opening/closing frequency 1,800 times/h)
• Failure Rate: 5 VDC 10 mA (P level, reference value) (120 frequency/min)
• Operating Temperature Range: -25~70°C(Do not freeze or dew condense.)
• Operating Humidity Range: 5~85%RH
• Weight: about 5.6 g
• Installation Method: Soldering
•