Spec

• Capacity: 2000 W
• Output voltage: 48 V
• Efficiency: 96% typ. (at 200 VAC 3-phase input) (at rated input/output conditions), 95% typ. (at 200 VAC single-phase/two-phase AC input), 96% typ. (at 230 V3-phase AC input), 96% typ. (Single-phase/Two-phase AC230 Vinput)
• Rated Input Voltage: 200~240 VAC (3-phase, Single-phase, Two-phase)
• Input Voltage Allowable Variation Range: 170~264 VAC (3-phase, Single-phase, Two-phase)/265~300 VAC (1 second), 240~384 VDC
• Frequency: 50/60Hz (47~63 Hz)
• Input current: 6.9 A type. (at 200 V3-phase AC input), 12 A type. (Single-phase/Two-phase AC200 Vinput), 6.0 A type. (at 230 V3-phase AC input), 10 A type. (Single-phase/Two-phase AC230 Vinput)
• Power factor: 0.9 or more
• Leak current: 3.5 mA or less (at 3-phase AC200 Vinput), 3.5 mA or less (at 3-phase AC230 Vinput)
• Inrush current (25°C cold start): 22 A type. (at 3-phase AC200 Vinput) (at rated input/output conditions), 16 A type. (3-phase AC230 Vinput)
• Output current: 45 A
• Voltage Variable Range: 48~56 V V.ADJ
• Maximum peak current: 67.5 A
• Ripple noise voltage: 190 mV (p-p) or less Frequency band: 20 MHz hour (under rated input/output conditions)
• Static input variation: 0.5% or less
• Static load variation: 1.5% or less (Variation at 0~100% load under rated input/output conditions)
• Ambient temperature fluctuation: less than or equal to 0.05%/°C
• Startup time: 1000 ms or less (at 3-phase AC200 Vinput), 1000 ms or less (at 3-phase AC230 Vinput), from input input to output voltage reaches 90% under rated input/output conditions
• Output holding time: 25 ms typ. (at 3-phase AC200 Vinput) (Under rated input/output conditions, from input cutoff until output voltage is less than 96.5%), 25 ms typ. (3-phase AC230 Vinput)
• Overcurrent Protection: Yes, Inverted L Drop Type, Automatic Return
• Overvoltage protection: Yes (130% or more of rated output voltage, cut off (power cut recovery))
• Overheat Protection: None
• Series operation: possible (up to 2 units can be connected. External Diode Required)
• Parallel operation: Yes (up to 2 units can be connected), use the switch for parallel operation in the "PARALLEL" side (limit rated output current to 80%).
• Alarm indicator light: Yes
• Withstanding Voltage: Between (Output terminals and signal output terminals) and (all input terminals): AC3kV 1 minute cutoff current 20 mA, Between (all input terminals) and (PE): AC2kV 1 minute cutoff current 20 mA, Between (all output terminals and signal output terminals) and (PE): AC1kV 1 minute cutoff current 40 mA, Between (all output terminals) and (all signal output terminals): AC0.5kV 1 minute cutoff current 10 mA
• Insulation Resistance: Between (All output terminals, All signal output terminals) and (Input Terminal, PE): 100 MΩ or more 500 VDC
• Vibration resistance: 10~55 Hz maximum 5G single amplitude 0.42 mm 3 direction 2h each
• Impact resistance: 147 m/s**2, 3 times each in 6 directions of 3 axes
• Elevation: 3000 m or less (>2000 m with additional derating to load factor)
• Ambient operating temperature: -40~70°C (with temperature derating). No freezing or dew condensation)
• Storage Temperature: – 40~85°C(Do not freeze or dew condense.)
• Operating Ambient Humidity: 95%RH or Less
• Storage Humidity: 95%RH or Less
• MTBF: 36000 hours or more
• Expected life: 10 years or more (At Rated Input, 50% Load Factor, Ambient Temperature +40°C or Less, Standard Mounted)
• Structure: Covered Type
• I/O connections: terminal strips
• Terminal Strip Type: Push-in Plus Terminal Strip
• mounting: DIN rail mounting
• Coating: Yes
• Cooling method: No cooling fan
• Protection structure: IP20, according to EN/IEC 60529
• Mass (body): not more than 3200 g
• Note: Some inverters display the output frequency as 50/60Hz as the output specification. However, do not use the output of the inverter as the power supply power source because there is a risk of smoke and fire due to the internal temperature rise of the power supply.
•