Spec

• Shape: DIN48 x 48
• constant/program: constant type
• Power supply voltage: 24 VAC (50/60Hz), 24 VDC
• Allowable voltage variation range: 85~110% of power supply voltage
• Power consumption: 2.3 W or less (24 VDC), 4.1VA or less (24 VAC)
• Input point: 1 point
• Temperature Input: Thermocouple: K, J, T, E, L, U, N, R, S, B, C/W, PLII, Platinum Temperature Measuring Resistor: Pt100, JPt100, Non-Contact Temperature Sensor: 10~70°C, 60~120°C, 115~165°C, 140~260°C
• Analog Input: Current Input: 4~20 mA, 0~20 mA, Voltage Input: 1~5 V, 0~5 V, 0~10 V
• Input Impedance: Current input: 150 Ω or less, Voltage input: 1 MΩ or more (When connecting the Model ES2-HB-N/THB-N, use 1:1 connection.)
• Control method: ON/OFF or 2-DOF PID (with auto tuning)
• Total number of control output points: 1 point
• Control output (1): Linear current output
• Control output (2): none
• Linear current output: 1 point, DC4~20 mA/DC0~20 mA, load 500 Ω or less, resolution: about 10,000
• Total number of auxiliary output points: 2 points
• Relay power: 1a AC250V 2 A (resistive load) Electrical life: 100,000 times (minimum applied load 5 V 10 mA)
• Event input: 2 points, Contact input: ON: 1 kΩ or less, OFF: 100 kΩ or more, Non-contact input: ON: Residual voltage 1.5 V or less, OFF: Leakage current 0.1 mA or less, Outflow current: about 7 mA (per 1 contact)
• Setting method: Digital setting by front key
• Indication method: 11 segment digital display and single emission display
• Multi-SP function: Up to 8 target values (SP0 to SP7) can be stored and selected by event input, key operation, or serial communication (up to 4 targets for event input)
• Sampling period: 50 ms
• Adjustment Sensitivity: Temperature Input: 0.1~999.9°C/°F (0.1°C/°F unit), Analog Input: 0.01~99.99%FS (0.01%FS unit)
• Proportional band (P): Temperature input: 0.1~999.9°C/°F (0.1°C/°F unit), Analog input: 0.1~999.9%FS (0.1%FS unit)
• Integration time (I): 0~9999 s (1 s unit), 0.0~999.9 s (0.1 s unit)
• Differentiation time (D): 0~9999 s (1 s unit), 0.0~999.9 s (0.1 s unit)
• Proportional band (P): Temperature input: 0.1~999.9°C/°F (0.1°C/°F unit), Analog input: 0.1~999.9%FS (0.1%FS unit)
• Integration time (I): 0~9999 s (1 s unit), 0.0~999.9 s (0.1 s unit)
• Differentiation time (D): 0~9999 s (1 s unit), 0.0~999.9 s (0.1 s unit)
• Control period: 0.1 s, 0.2 s, 0.5 s, 1~99 s in 1 s increments
• Manual reset value: 0.0~100.0% (in 0.1% increments)
• Insulation Resistance: 20 MΩ or More (500 VDC Applied)
• Withstanding Voltage: 3000 VAC 50/60Hz 1min (between the terminals of the heteropolar charging section)
• Vibration resistance: Endurance: 10~55 Hz 20 m/s**2, 3 axis direction 2h, Malfunction: 10~55 Hz 20 m/s**2, 3 axis direction 10min
• Shock Resistance: Endurance: 300 m/s**2, 3 Times Each in 3 Axial Directions, Malfunction: 100 m/s**2, 3 Times Each in 3 Axial Directions
• Operating temperature range: -10~55°C(Do not freeze or dew condense.), 3 years warranty (standard single installation): -10~50°C(Do not freeze or dew condense.)
• Storage Temperature Range: – 25~65°C(Do not freeze or dew condense.)
• Operating Humidity Range: 25~85%RH
• Elevation: 2000 m or less
• Protective Structure: Front: IP66, Rear Case: IP20, Terminal: IP00
• Memory protection: nonvolatile memory (write count: 1 million)
• Case Color: Black
• terminal shapes: push-in plus terminal strips
• Accessories: Mounting adapter, waterproof packing
• Weight: Body: Approx. 120 g, Adapter: Approx. 10 g
• Optional: USB-Serial Conversion Cable: E58-CIFQ2, Waterproof Packing: Y92S-P8, Adapter: Y92 F-45/Y92 F-49, Waterproof Cover: Y92 A-48N, Rigid Front Cover: Y92 A-48H, Soft Front Cover: Y92 A-48D, Support Software (CX-Thermo): EST2-2C-MV4
• Indication accuracy: Thermocouple: (greater ±0.3% of indicated value or ±1°C) ±1 digit or less, Platinum thermometer resistor: (greater ±0.2% of indicated value or ±0.8°C) ±1 digit or less, Analog input: ±0.2%FS±1 digit or less, (K (-200~1300°C range), T and N -100°C or less, U and L ±2°C±1 digit or less. Not specified below 400°C for B. 400~800 degrees C of B is not more than +/- 3 degrees C. R, S below 200 degrees C is not more than +/- 3 degrees C +/- 1 digit. C/W not more than +/- 1 digit (greater of +/- 0.3%PV or +/- 3 degrees C). PLII is not more than +/- 1 digit (greater of +/- 0.3%PV or +/- 2 degrees C). )
• Temperature/Voltage Effect: Thermocouple: R, S, B, C/W, PLII: (greater of ±1% of indicated value or ±10°C) ±1 digit or less, Other Thermocouple: (greater of ±1% of indicated value or ±4°C) ±1 digit or less, but less than ±10°C for K-sensor -100°C or less, Platinum Temperature Measuring Resistor: (greater of ±1% of indicated value or ±2°C) ±1 digit or less, Analog Input: ±1%FS±1 digit or less, Ambient Temperature: -10°C to 23°C to 55°C, Voltage Range: -15 to +10% of rated voltage
• Effect of electromagnetic interference: Thermocouple: R, S, B, C/W, PLII: (greater ±1% or ±10°C of the indicated value) ±1 digit or less, Other thermocouple: (greater ±1% or ±4°C of the indicated value) ±1 digit or less, but less than -100°C of K sensor ±10°C, Platinum thermometer resistor: (greater ±1% or ±2°C of the indicated value) ±1 digit or less, Analog input: ±1%FS±1 digit or less
• Effect of signal source resistance: Thermocouple: 0.1°C/Ω or less (100 Ω or less), Platinum temperature-measuring resistor: 0.1°C/Ω or less (10 Ω or less)
• Transmission Line Connection: Multidrop (RS-485)
• Communication system: RS-485 (2 wire half-duplex)
• synchronization methods: rake synchronization
• Protocols: CompoWay/F, Modbus
• Speeds: 9600, 19200, 38400, 57600 bps
• Transmission Code: ASCII
• Data bit length: 7, 8 bits
• Stop bit length: 1, 2 bits
• Error Detection: Vertical Parity (None, Even, Odd), BCC (Block Check Character) CompoWay/F, CRC-16 Modbus
• Flow control: None
• Interface: RS-485
• Retry function: None
• Communication buffer: 217 bytes
• Communication response/transmission wait time: 0~99 ms (Initial value: 20 ms)
• Programmless communication function: Function to read/write parameters of the shape E5□C, and to run/stop them via PLC memory. The Model E5□C automatically communicates with the PLC, so there is no need to create a communication program. Number of units that can be connected: Up to 32 units (Up to 16 units for FX series)
• Compo communication function: The target value and RUN/STOP indication can be transmitted from the temperature controller set in the master to the slave between the temperature controllers connected. You can set the slope and offset for the target value. Number of devices that can be connected: Up to 32 (including the master)
• Copy function: It is possible to copy set parameters from the temperature controller set on the master to the slave between the temperature controllers connected.
•