Spec

• Category: Incremental hollow shaft type
• Diameter: φ20 mm
• Power supply voltage: 5 VDC ±5%
• Current consumption: 40 mA or less
• Resolution: 360P/R
• Inrush current: about 3 A (10 μs)
• Output phase: A, B, Z phase
• Output Type: NPN Voltage Output
• Output Resistance: 2.2 kΩ
• Output current: 20 mA or less
• Residual voltage: 0.5 V or less (at 20 mA load current)
• Maximum response frequency: 100 kHz (50 kHz with Z-phase reset)
• Output Phase Difference: Phase Difference between Phase A and Phase B 90±45°
• Output rise/fall time: 2 μs or less (Cord length 1 m, load current 20 mA)
• Starting torque: 1mN.m or less
• Moment of inertia: 0.351 x 10**-7 kg.m**2 or less
• Shaft Allowable Force: Radial: 1.9 N, Thrust: 1.9 N
• Maximum allowable speed: 6000r/min
• protection circuit: power reverse connection protection
• Ambient Temperature Range: In Use: – 10~70°C (Do not freeze or dew condense.), Storage: – 20~80°C (Do not freeze or dew condense.)
• Ambient Humidity Range: In Use: 35~85%RH (However, it should not condense.), Storage: 35~85%RH (However, it should not condense.)
• Insulation Resistance: Excluded for Capacitor Ground
• Withstand voltage: Excluded for capacitor ground
• Vibration Resistance: Durability: 10~55 Hz Dual Amplitude 1.5 mm X, Y, Z 2h Each Direction
• Shock Resistance: Endurance: 500 m/s**2 x 3 times in each direction X, Y, Z
• Protection Structure: IEC: IP40
• Connection method: cord drawer type (cord length: 1 m)
• Material: Case: Aluminium, Body: Aluminium, Shaft: SUS304
• Weight: Packaged condition: approx. 40 g
• Accessories: Owner's Manual, L Wrench (M0.9)
•