Spec

• Detection Head Size: M8
• Type: Cylindrical (with Screws), Shield Type
• Type of power supply: DC 3-wire
• Detection distance: 1.5 mm ±10%
• Setting distance: 0~1.05 mm
• Hysteresis: Less than or equal to 15% of detection distance
• Detectable object: Magnetic metal (detection distance is reduced for non-magnetic metals)
• Standard Detected Object: Iron 8 x 8 x 1 mm
• Response frequency: 200 Hz (average)
• Supply voltage: 12~24 VDC ripple (p-p) 10% or less
• Operating voltage range: 10~30 VDC
• Current consumption: 10 mA or less
• Control Output (Output Format): NPN Open Collector
• Control output (open/close capacity): 200 mA or less
• Control Output (Residual Voltage): 2 V or Less (Load current 200 mA or less, cord length 2 m)
• Indication lamp: operation indicator lamp (yellow)
• Operating mode: NO
• Protection circuits: load short-circuit protection, output reverse connection protection, power reverse connection protection, surge absorption
• Operating Temperature Range: -25~70°C
• Storage Temperature Range: – 25~70°C
• Operating Humidity Range: 35~95%RH
• Storage Humidity Range: 35~95%RH
• Effect of temperature: within ±20% of the detection distance at 23 degrees C within the temperature range of -25 to +70 degrees C.
• Effect of voltage: within +/- 1% of the detection distance at the rated power supply voltage within +/- 15% of the rated power supply voltage.
• Insulation Resistance: Between Charging Part and Case: 50 MΩ or More (at 500 VDC Mega)
• Withstanding Voltage: Between Charging Part and Case: 1000 VAC 50/60Hz 1min
• Vibration Resistance: Durability: 10~55 Hz Dual Amplitude 1.5 mm X, Y, Z 2h Each Direction
• Shock Resistance: Durability: 500 m/s**2 10 times in each direction X, Y, Z
• Protection Structure: IEC: IP67
• Connection method: cord drawer type (2m)
• Weight: Packaged condition: approx. 90 g
• Material: Case: Stainless Steel (SUS303), Detecting Surface: Stainless Steel (SUS303), Tightening Nut: Stainless Steel, Toothed Washer: Galvanized Iron
• Accessories: Owner's Manual
•