Spec

• Detection Head Size: M12
• Type: Cylindrical (with screws), Pulse Excitation Type, Shield Type
• Type of power supply: DC 3-wire
• Detection distance: 7 mm ±10%
• Setting distance: 0~4.9 mm
• Hysteresis: Less than or equal to 10% of detection distance
• Detectable objects: magnetic metals, non-magnetic metals
• Standard Detected Object: Iron 21 x 21 x 1 mm
• Response frequency: Mean: 2 Hz
• Supply voltage: 10~30 VDC, including 10% ripple (p-p), Class2
• Current consumption: 20 mA or less
• Power consumption: 30 mA or less at 24 VDC: 720 mW or less
• Control Output (Output Format): PNP Open Collector
• Control Output (Open/Close Capacity): 100 mA or Less (10 ~30 VDC Class2)
• Control Output (Residual Voltage): 2 V or Less (Load current 100 mA, cord length 2 m)
• Communication: IO-Link Ver1.1, Transmission speed: COM3 (230.4kbps), Data length: 2 bytes (PD size)/1byte (M-sequence type: TYPE_2_2) (OD size), Minimum cycle time: 1.0 ms
• Indicator: Standard I/O mode (SIO mode): operation indicator (orange/lit), communication indicator (green/unlit), IO-Link mode (COM mode): operation indicator (orange/lit), communication indicator (green/flashing (1s cycle))
• Operating mode: NO+NC
• Protection circuits: load short-circuit protection, output reverse connection protection, power reverse connection protection, surge absorption
• Operating Temperature Range: 0~85°C (Do not freeze or dew condense.), UL Temperature Rating: 0~60°C (Do not freeze or dew condense.)
• Storage Temperature Range: – 15~85°C (Do not freeze or dew condense.)
• Operating Humidity Range: 35~95%RH (However, it should not condense.)
• Storage Humidity Range: 35~95%RH (However, it should not condense.)
• Temperature effect: within +/- 20% of the detection distance at 23 degrees C within the temperature range of 0 to +85 degrees C.
• Effect of voltage: within +/- 1.5% of the detection distance at the rated power supply voltage within +/- 15% of the rated power supply voltage.
• Insulation Resistance: Between Charging Part and Case: 50 MΩ or More (at 500 VDC Mega)
• Withstanding Voltage: Between Charging Part and Case: 1000 VAC 50/60Hz 1min
• Vibration Resistance: Durability: 10~55 Hz Dual Amplitude 1.5 mm X, Y, Z 2h Each Direction
• Shock Resistance: Durability: 1000 m/s**2 10 times in each direction X, Y, Z
• Protection Structure: IEC 60529: IP67
• Connection method: cord drawer type (2m)
• Weight: Packaged condition: approx. 140 g
• Materials: Case: Stainless Steel (SUS303), Detecting Surface: Stainless Steel (SUS303), Tightening Nut: Stainless Steel (SUS303), Toothed Washer: Iron Galvanized, Cord: Vinyl Chloride (PVC)
• Accessories: Owner's Manual, Clamping Nuts, Toothed Washer
•