Features

• Measured and recorded the temperature of the substrate and parts with the attached K thermocouple.
• Specialized software enables you to set various conditions by linking with a PC
• The birth of a high-spec hot-air workstation with excellent cost performance
• Profiling for near-reflow conditions
• Conditioning history and correction possible by linking with PC
• Features required for SMD rework condensed into a compact body
• A low-cost SMD rework system can be constructed by connecting to a PC with a dedicated option or the included dedicated software.
• A full-scale profile can be created with 6 zones of hot air + 1 zone of bottom heater.
• The FR-811 can be set by dividing the temperature, time and air volume into 6 zones, so that the temperature rise gradient from pre-heating to final heating can be controlled in an ideal form. This makes it possible to create a profile similar to a reflow furnace.
• Allows recording of temperature data
• By connecting the FR-811 with the included thermocouple, it is possible to "measure and record" the temperature of parts and boards.
• Setting various conditions by linking with a computer
• By connecting the FR-811 to a PC with a USB cable and using the included dedicated software, you can check the set profile and the actual temperature movement in a graph in real time. If you want to change the profile, you can also make fine adjustments to the settings from your computer. (* After the change, it is necessary to transfer the data to FR-811 again.) You can also save settings and graphs in CSV format.
• Interlocking with the bottom heater
• An optional bottom heater can be connected to the FR-811 to control the ON/OFF timing and output.
• High output and large air volume for "quick removal"
• Features that make SMD rework more comfortable
• Improved temperature characteristics with new nozzle
• By providing a hole at the top of the nozzle, convection of hot air is generated in the nozzle, and the outside and center of the nozzle can be heated uniformly, improving workability. (BGA nozzle only)
• Equipped with vacuum pickup function
• It is equipped with a vacuum pickup so that parts can be adsorbed and lifted.
• It is adsorbed beforehand, and when the solder melts, the part is lifted by the spring mechanism. Prevents mistakes such as forcibly pulling up parts and peeling off lands.
• You can see the pickup timing at a glance! Pickup indicator
• By setting the vacuum pickup function in advance, when the solder melts and the parts are picked up automatically, the indicator rises, and the moment of pickup is visible.
• Even if the parts are hidden by the nozzle and the moment when the solder melts cannot be seen, it is possible to know that the removal has been completed, making the pickup work easy and safe.
• Operation section that enables you to set complex settings intuitively and supports PC linkage
• Equipped with an easy-to-read LCD screen
• Equipped with a highly visible LCD screen, you can check various settings and operating conditions of the main unit. It displays not only letters and numbers but also graphically so that you can check information intuitively.
• Easy setting with multi-directional operation knob
• The setting displayed on the LCD screen can be changed easily with a single multi-directional control knob. In addition to turning and pressing, you can also move the dial in a cross pattern for quick operation.
• Computer Connection (USB Port Included)
• USB port for connecting to PC via USB cable. By using the included dedicated software, various condition settings and temperature data can be displayed and recorded in real time.
• USB port for easy data upload and download
• If you connect a USB memory to a dedicated USB port, you can download and upload data directly without a computer.
• Easy Removal Nozzle & Maintenance
• Nozzle can be quickly replaced to suit a wide variety of parts.
• Heater replacement is also easy and reliable.
• Simple profiles can also be created (same as FR-810 B)
• Timer function keeps working time constant.
• Prevents overheating of parts and facilitates repetitive work.
• Simple profile creation with preset linkage function
• You can create a simple temperature profile by connecting the timer function and registered preset modes. (Up to 5 steps can be made) Work time is constant, prevention of overheating to parts and repetitive work are easy, and advanced removal work is also supported. It greatly improves workability.
• Auto Sleep/Auto Shutoff function
• Designed for safety and energy conservation. When the trowel part is placed on the trowel holder, the auto sleep function works, starts cooling and automatically shifts to the standby state. If you do not perform any operation for 30 minutes, the auto shut-off function will activate and the FOMA terminal will enter standby mode. Passwords also restrict access to settings for easier management.
• Optional low-cost rework systems can be built
• Lead-free recommended: This product is also recommended for work using lead-free solder.
• RoHS Compliant (as of July 2024): This product complies with the regulation values of 10 substances prohibited by the European RoHS Directive.