HAKKO

68-9255-60　Reworkstation FR-4103 100 V 2 Pole Ground Plug　FR702-82

Features

Powerful Reworkstation with Hot Air
Improved soldering, solder absorption and hot air functions
The hot air has a vacuum function as standard.
Space-saving 2-port 4-in-1 soldering
N2 soldering iron can be optionally selected according to the work.
4 port reworkstation with standard 140 W solder absorber, L-type soldering iron and 670 W hot air
Supports various soldering, suction work and rework with 7 types of soldering iron parts
In addition to the standard 140 W solder absorber, L-type soldering iron, and high power and large air volume hot air, 4 types of applications can be used.
The iron tip/nozzle is a separate type that is separated from the heater and has excellent cost performance.
High Power Solder Absorber FR-4103
The power consumption has been increased from 50 W to 140 W, making it possible to remove components on multilayer substrates without stress. It also leads to shorter work time.
In addition, the new nozzles support even the smallest land diameters, narrow spaces, and flat terminals found in mobile phone boards that have become smaller.
Soldering Iron FX-8805
Uses the "T 19 Series" with improved thermal conductivity by reviewing the appearance, design and internal structure of the iron tip. By making differences in the outer shape of the iron tip and the thickness of the inner part, the heat storage of the iron tip is increased and work requiring heat capacity can be performed.
Hot Air Rework Hot Air Iron Part
High output 670 W and powerful air volume design for increased work efficiency!
High output and large air volume for "quick removal"
Improved temperature characteristics with new nozzle
By providing a hole at the top of the nozzle, convection of hot air is generated in the nozzle, and the outside and center of the nozzle can be heated uniformly, improving workability. (BGA nozzle only)
Equipped with vacuum pickup function
It is equipped with a vacuum pickup so that parts can be adsorbed and lifted.
It is adsorbed beforehand, and when the solder melts, the part is lifted by the spring mechanism. It prevents the mistake of forcibly pulling up the parts and peeling off the land.
You can see the pickup timing at a glance!
By setting the vacuum pickup function in advance, when the solder melts and the parts are picked up automatically, the indicator rises, and the moment of pickup is visible. Even if the parts are hidden by the nozzle and the moment when the solder melts cannot be seen, the pickup work can be done easily and safely.
Lead-free recommended: This product is also recommended for work using lead-free solder.
RoHS Compliant (as of July 2024): This product complies with the regulation values of 10 substances prohibited by the European RoHS Directive.

Spec

Power: 100 VAC 50/60Hz
Power consumption: 1030 W
Plug Shape: 2-Pole Grounding Plug
Station
Dimensions: 370 (W) x 150 (H) x 220 (D) mm
Weight: 9 kg
station part (soldering iron)
Output: 26 VAC
Set temperature range: 50~480°C
Ripple temperature: ±1°C without load (when set between 200~480°C)
Station (absorber)
Output: 24 VAC
Vacuum generation method: Double cylinder type diaphragm pump
Achieved vacuum pressure: 80 kPa (600 mmHg)
Suction flow rate: 15 L/min.
Set temperature range: 330~450°C
Ripple temperature: +/- 5°C without load
Station (Hot Air)
Power consumption: 30 W
Air Flow: 1~9(5~115 L/min.)
Set temperature range: 50~600°C
soldering iron part
Power consumption: 65 W (26 V)
Resistance between irons and ground: <2 Ω
Leak voltage: <2 mV
Heater: Ceramic heater
Attached Iron Tip: B Type (T19-B)
Cord length: 1.2 m
Total Length: 222 mm (With Tee T19 B)
Weight: 52 g (with Tee T19 B)
irons for absorbers
Power consumption: 140 W (24 V)
Nozzle Ground Resistance: <2 Ω
Leak voltage: <2 mV
heaters: composite heaters
Attached Nozzle: φ1 mm S Type (N61-05)
Cord length: 1.2 m
Total Length: 168 mm (with Nozzle N61- 05)
Weight: 190 g (with Nozzle N61- 05)
Iron part for hot air
Power consumption: 670 W
Total Length: 250 mm
Weight: 180 g
*The suction flow rate is the flow rate measured at the station filter case suction port.
*The numerical value of air volume is an approximate standard. The range of air volume varies depending on the installed nozzle. When the nozzle of the smallest diameter is installed, the air volume can be set to the minimum value, and when the nozzle is not installed, the air volume can be set to the maximum value.
*Total length and weight excludes cord hose.
Set Contents
Body
Iron Part FX8805 (with Iron Tip B Type) (FX8805-01)
Iron Part FR-4103 (Nozzle φ1 mm with S Type) (FR4103-81)
Hot Air (With Nozzle φ4 mm)
Trowel Stand (with Cleaning Sponge/Cleaning Wire) Blue & Yellow (FH800-03BY)
Trowel Stand (with Cleaning Sponge) (FH410-81)
Iron Holder (For Hot Air) (B5150)
Color Band: 2 (B5125)
Heat Resistant Pad (B2300)
Power Cord (B5041)
Toolbox (C5030)
Cleaning Pin Nozzle for φ1 mm (B1087)
For Cleaning Pin Heater (B1215)
Cleaning Drill Nozzle for φ1 mm (B1303)
Nozzle Wrench (B5106)
2 Filters (A5020)
Ceramic Paper Filter L 4 Pieces (A5044)
φ3 mm Adsorption Pad: 2 (A1520)
φ5 mm Adsorption Pad: 2 (A1439)
φ7.6 mm Adsorption Pad: 2 (A1438)
Vacuum pipe adjustment knob (B3023)
Owner's Manual
Registration (3-year warranty)

Package size：507×545×275 mm　13.9 kg　 [About Package size]

Order No.	68-9255-60
Model No.	FR702-82
JAN Code	4962615053917
Standard price	JPY: 253,000 USD: 1,585.91 Excange rate 1USD= 159.53JPY Valid price in Japan
Quantity	1piece
Stock in Japan
Supplier Stock