Spec

• Manufacturer: Elecom
• Model Number: EHB-UG2C05E-PL
• Number of ports: 5
• Standards: IEEE802.3ab, IEEE802.3u, IEEE802.3
• Connection method: 1000BASE-T, 100BASE-TX, 10BASE-T
• Power: 100~240 VAC
• Size: 175 (W) x 100 (D) x 29 (H) mm
• Weight: 440 g
• Enclosure Material: Metal
• Accessories: AC adaptor, AC power cable (3 pins approx. 1.8 m), 3 pin -2 pin conversion adaptor, power cable disconnection prevention band, 4 rubber feet (body installed), 2 serial number labels, Quick Setup Guide, For Safety Use
• Color: Black
• Connector Shape: RJ-45 x 5
• Compliance Standard: VCCI ClassB
• Transmission rates: 1000Mbps (1000BASE-T), 100Mbps (100BASE-TX), 10Mbps (10BASE-T)
• PoE power supply capacity: at standard/30.0 W/1 port (maximum), af standard/15.4 W/1 port (maximum) up to 50 W total
• Applicable cables: 1000BASE-T/UTP Category 5e or higher, 100BASE-TX/UTP Category 5 or higher, 10BASE-T/UTP Category 3 or higher
• MTBF: 198,000 hours
• Heat Dissipation: Approximately 204.9 kJ/h (Maximum)
• Operating environmental conditions: Temperature: 0°C to 50°C Humidity: 10% to 90% (non-condensing)
• Storage Environmental Conditions: Temperature/-40°C~70°C Humidity/5%~90% (No Condensation)
• switching methods: store and forward
• Buffer memory: 128Kbytes (dynamically allocated per port)
• Flow control control: IEEE802.3x at full duplex, back pressure at half duplex
• Maximum packet forwarding capacity: 7.4Mpps
• Number of registered MAC addresses: 2,048 (total for all ports)
• Power saving function: Easy Energy Saving E (IEEE802.3az)
• Energy efficiency: 1.4 W/Gbps
• Maximum effective transmission rate: 5.0Gbps
• PoE specification: IEEE802.3af/at (PoE+) compliant
• PoE-capable ports: 4 ports (port 1~4 only)
• PoE power supply system: Alternative A
• Communication protocol: Full duplex, Half duplex
• Switching fabric: 10.0Gbps
• Measured port speed: 1Gbps/5 ports
• Installation method: Horizontal installation, wall mounting, magnet
• Packet transmission rates: 1,488,095 packets per second (1000Mbps), 148,809 packets per second (100Mbps), and 14,880 packets per second (10Mbps)
• Immunity Test: IEC61000-4-2/Lv. 3 Compliant, IEC61000-4-3/Lv. 3 Compliant, IEC61000-4-4/Lv. 3 Compliant, IEC61000-4-5/Lv. 3 Compliant, IEC61000-4-8/Lv. 3 Compliant, IEC61000-4-11/Lv. 3 Compliant
• Loop detection/prevention function: Loop prevention
• Power consumption: 56.9 W maximum
•