68-1348-23 Adhesive Load Bond M
Features
- A dedicated bond for lane separation markers (rubber poles) pole cones, road rivets and curb rivets made of Sekisui resin.
- Mix 2 kinds of main agent and curing agent at a ratio of 1:1.
- Since this is a 2-liquid type, please mix the main agent (white) and curing agent (black) at a ratio of 1:1. (Mix well until the black and white stripes disappear and the color becomes gray.)
- It can be used for about 20 minutes at 25°C until it hardens.
Spec
- Material: Main agent/epoxy resin, curing agent/modified aliphatic polyamine
- Application: Adhesion of sekisui pole cone, road studs and curb studs
- [Note]
- *Avoid construction when it rains or snows.
- *It will not cure at 5°C or lower. Even if it looks like it has cured, do not use it as it may cause insufficient strength and is dangerous.
- *Please install safety equipment and traffic control staff to ensure safety before construction.
- *Remove dust, moisture, and oil from the joining surfaces of rivets, etc., and clean them thoroughly.
- *Avoid places with obstacles and uneven road surfaces, or adjust the uneven ground.
- *Please choose a flat place as much as possible.
Package size：290×110×70 mm 2 kg [About Package size]
| Order No. | 68-1348-23 | |
|---|---|---|
| Standard price |
JPY: 7,200
USD: 44.80
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1set | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|