MIDORI ANZEN CO., LTD.

67-5677-59　［Discontinued］Clean Wonder 3 Phase 200 V 0.75KW　WR-104-J

Features

Since the filter is not used for collection, the air volume drop due to clogging is small and the performance is maintained for a long time.
Larger inspection doors have greatly improved maintainability, including removal of collection disks and internal cleaning.
Depending on the situation of the installation site, the suction port can be selected from three locations: top surface and left and right sides. (Standard is top)
Inspection door can be selected to open left or right. (Default is left opening)
The collection disk can be cleaned and used repeatedly, making it an environmentally friendly product.
Has excellent maintainability of the blowing part.
For machine tool processing.

Power (V): 3-phase 200
Static pressure (kPa) (50/60Hz): 1.1/1.5
Body Dimensions (mm) Width: 470
Body Dimensions (mm) Depth: 522
Body Dimensions (mm) Height: 605
Mounting Dimension (mm): 370 x 440
Suction Bore (mm): 123
Filter Type: Filterless
Motor Type: 2P (IE3 High Efficiency Motor)
Removal method: inertial collision, collection by centrifugation (filterless)
Collection efficiency (%): 99
Power (kW): 0.75
Standard power consumption rate: 10.13 yen/h
Air Volume (m3/min) (50/60Hz): 7.3/8.6
Applicable Mist: Both Oily Oil Mist and Water-soluble Oil Mist (No. 1 and No. 2 Prohibition of Petroleum Collection and Collection)(However, it may not be usable depending on the oil mist generated.)
Intake gas temperature: 0~50°C
Application: For machine tool machining, etc.
Collection efficiency: 99% (for water-soluble mist)
Removal method: inertial collision, collection by centrifugation (filterless)
Applicable Mist: Both Oily Oil Mist and Water-soluble Oil Mist (No. 1 and No. 2 Prohibition of Petroleum Collection and Collection)(However, it may not be usable depending on the oil mist generated.)
Material/Finish: Steel (Powder Coating)
Supply power from the protective circuit of the machine tool or power supply equipment.
Keep the duct inlet at least 1 m away from the source of oil mist.
If the distance from the source cannot be secured, install a shield plate or filter.
It may cause clogging or blow-up.
Regular maintenance is required to maintain performance.
Country of origin: Japan
Securities Code: 247-5815

Package size：550×630×800 mm　49 kg　 [About Package size]

Order No.	67-5677-59
Model No.	WR-104-J
Standard price	JPY: 300,000 USD: 1,866.60 Excange rate 1USD= 160.72JPY Valid price in Japan
Quantity	1unit

Stock in Japan	-