64-7941-95 ［Discontinued］Height limit Detection Sensor ( Transmitter/Set ) AC100V EA864CS-12
Features
- It consists of a floodlight that emits an infrared pulse beam and a light receiver that receives it. When an object passes between the floodlight and the light receiver installed at a predetermined height, it detects and operates, and transmits the signal from the transmitter built into the light receiver to the receiver via radio waves.
- Powerful when installed in a straight line with multiple infrared sensors. By switching the modulation frequency of the infrared pulse beam by H/L, it is possible to avoid rounding.
- It detects (determines) whether vehicles are allowed to pass in places subject to height restrictions by blocking an infrared pulse beam, and if so, it can transmit radio waves to a receiver at a remote location to alert the user.
- Light shielding response time can be varied by volume from 0.05 seconds to 0.7 seconds. By setting the shading time later, it is difficult to malfunction even for fallen leaves. However, please be aware that if you make it unnecessarily slow, the passing of the vehicle will not be detected.
- The distance from the transmitter to the receiver can be up to 100 meters in sight. (Distance may be reduced depending on the environment in which it is used.)
Spec
- Manufacturer: Takenaka Engineering (TAKEX)
- Model Number: EXM -15 HA
- Installation distance: 15 m or less outdoors
- Distance allowance: Outdoor: 10 times (150 m)
- Detection method: Near infrared pulse beam cutoff method
- Infrared: Double-modulated pulsed beam with near- Red external light emitting diodes (LED)
- Detection response time: 0.05 to 0.7 seconds (variable by volume)
- power supply - AC100V (50/60 Hz)
- Power Consumption: light projector: 2W or less Photodetector: 2W or less
- Usable frequency band: 426 MHz band (radio equipment of Koden Kasei System)
- Output: 10 mW or less
- Antenna: Built-in type
- Radio wave range: Approximately 100 m (line-of-sight distance)
- Detection output: Detection time: Detection signal transmission Continuous detection time: Repeated transmission
- Detection indicator lamp: red LED (receiver) When detecting output: On
- Light receiving sensitivity indicator lamp: red LED (light receiver) Light receiving level attenuation: On
- Flood indicator lamp: green LED (light projector) When Flood: On
- Additional Functions: Infrared Frequency Switching Function (L ← → H), AGC Circuit, and Frost Protection Cover Periodic Transmission Function
- Operating Temperature Range: -10 °C to + 50 °C
- Optical axis adjustment range: horizontal chisel: ± 90
- Location: Outdoor/Indoor (Wall surface, pole: φ 42, to φ 49)
- wire connections: terminal formulas
- Size: 73 x 67.2 x 332 (H) mm
- Weight: light projector: about 600 g Light receiver: about 660 g
- material : Plastic
- Accessories: Cable with plug: 2 pieces pole mounting metal bracket: 2 pieces pole mounting Plate: 2 pieces Damping Plate: 1 piece Mounting Tapping Screws φ4 x 20: 4 pieces Round Sara Small Screws M4 x 20: 4 pieces Round Saw Small Screws M4 x 6: 4 pieces Instruction Manual: 1 Part
- The infrared sensor is installed at a distance of 15 m.
- Horizontal adjustment of infrared optical axis ° 90 ° (vertical adjustment is not possible)
- Wide beam of light with easy optical axis adjustment
Package size：187×428×102 mm 1.96 kg [About Package size]
| Order No. | 64-7941-95 | |
|---|---|---|
| Model No. | EA864CS-12 | |
| JAN Code | 4550061506264 | |
| Standard price |
JPY: 54,620
USD: 342.38
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1set | |
|
||
| Stock in Japan | - | |