Spec

• Package: LAS
• Content: Spacers for surface mounting LEDs
• Compatible LED Diameter: Head Diameter: phi 3, phi 5/Foot Pitch: 2.54 mm, 2.5 mm/Foot Diameter: phi 0.5, phi 0.6 or Less/□ 0.5, □ 0.6 or Less
• : Black
• Type: For surface mounting/90 degree tilt
• Holder Size:
• Entries: 100
• Material: LCP resin (UL 94 V-0)
• Operating temperature range: -40 to + 125 degrees C
• The spacer itself is compatible with reflow temperature (260 degrees C 0 seconds).
• LED mounting spacers are used for such purposes as "Keep the height constant if more than one" or "fixing the mounting height" of LEDs.
• Figure 1 shows a typical vertically mounted structure. They are basically cylindrical in shape, each with an LED lead inserted into a hole or groove.
• In Figure 1, two LED leads are used, but there are also three leads, such as a two-color LED. The material of the spacer is an insulator, and in the case of cylindrical and other types, the lead wire of the LED goes into the spacer, so it also provides insulation protection.
• Figure 1 shows a vertical mounting type, but there are other types such as "horizontal mounting type" and "both vertical and horizontal combination type," and select an LED spacer with the required height as shown in Figure 2. A basic explanation of how to use LEDs.
• We will provide you with design examples of lighting circuits and precautions for connection.
• RoHS compliant
• Quantity: 1 bag (100 pieces)
•