Spec

• Rated 125 VAC -15 A
• Withstand voltage: 2000 V AC (1 minute)
• Insulation resistance DC 500 V, 100 Momega or more
• Acquired standard PSE mark product (Accredited agency name: JET)
• Panel mounting method screw fastening
• Screw tightening torque 0.5 N m (M 3 x 10 screws and nuts) 0.8 N m (4.2 x 8 tapping screws)
• Mounting plate thickness: 0.8 mm to 1.2 mm
• Main insulation material (body) P.P.S.　(GF) UL94V-0
• Main insulation material (cover) P.P.E.　(UL94V-0)
• Terminal fittings 250 Faston tabs (t 0.8) soldered together
• Cover color W (white)
• INSTRUCTIONS (1) Do not bend the terminal when using it.
• (2)It is for internal use and can not be used for indoor wiring.
• Solder heat resistance conditions Manual soldering (soldering iron) conditions
• Temperature of trowel tip: 390 +/- 10 degrees C
• Iron application time: 5 seconds
• Twice times
• CautionFlow reflow is not a covered product. Do the second soldering with a soldering iron after the product has cooled sufficiently and returned to normal temperature after the first soldering. We recommend checking the actual conditions of use when using the product. The above conditions have been confirmed through tests on the product alone.
•