64-4807-99 Soft Polyurethane Tube Clear Yellow 12 x 8 20 M UC1280-20-CY
FeaturesFeatures class="init">
64-4807-99 Soft Polyurethane Tube Clear Yellow 12 x 8 20 M UC1280-20-CY 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NIHON PISCO CO., LTD.
64-4807-99 Soft Polyurethane Tube Clear Yellow 12 x 8 20 M UC1280-20-CY
-
特徴
- Ideal for compact piping.
- You can also flush it.
- The cut mark useful for cutting tubes is displayed at intervals of about 500 mm.
- Use of insert ring is recommended. (If you need to ensure the drawing strength of JIS standard, use insert ring.). (JISB 8381-1))
- Make sure that the tube is not subjected to loads such as tension, torsion or extreme bending. This may cause the tube to collapse, burst, or fall out.
- The breaking pressure of the tube decreases with the increase of temperature, so please understand the working pressure well and check the safety factor with sufficient margin.
- Use the tube with a minimum bend radius.
- When attaching a tube to a one-touch joint, check whether the cut area of the tube is cut at a right angle, whether the outer diameter of the tube is scratched, and whether the tube is elliptical.
Spec
- Outer Diameter ( mm ) : 12
- Inner Diameter (mm): 8
- Minimum Bending Radius ( mm ) : 27
- Working Fluids: air, water (with conditions)
- Total length ( m ) : 20
- Tube Outer Diameter (φ D) (mm): φ 12
- Tube Inner Diameter (φD) (mm): φ8
- Minimum Mounting Radius (mm): 35
- tube colors: clear yellow
- Total length ( m ) : 20
- Maximum Working Pressure: 0.6 MPa at 20 °C 65 %RH hours
- Working Vacuum Pressure: -100 kPa
- Operating Temperature Range: -15 to 60 °C (Without Freezing)
- Material/Finishing: TPU
- Country of origin: Japan
- Securities Code: 818 -2407
-
Package sizePackage sizes="init">
64-4807-99 Soft Polyurethane Tube Clear Yellow 12 x 8 20 M UC1280-20-CY 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NIHON PISCO CO., LTD.
64-4807-99 Soft Polyurethane Tube Clear Yellow 12 x 8 20 M UC1280-20-CY
-
特徴
- Ideal for compact piping.
- You can also flush it.
- The cut mark useful for cutting tubes is displayed at intervals of about 500 mm.
- Use of insert ring is recommended. (If you need to ensure the drawing strength of JIS standard, use insert ring.). (JISB 8381-1))
- Make sure that the tube is not subjected to loads such as tension, torsion or extreme bending. This may cause the tube to collapse, burst, or fall out.
- The breaking pressure of the tube decreases with the increase of temperature, so please understand the working pressure well and check the safety factor with sufficient margin.
- Use the tube with a minimum bend radius.
- When attaching a tube to a one-touch joint, check whether the cut area of the tube is cut at a right angle, whether the outer diameter of the tube is scratched, and whether the tube is elliptical.
仕様
- Outer Diameter ( mm ) : 12
- Inner Diameter (mm): 8
- Minimum Bending Radius ( mm ) : 27
- Working Fluids: air, water (with conditions)
- Total length ( m ) : 20
- Tube Outer Diameter (φ D) (mm): φ 12
- Tube Inner Diameter (φD) (mm): φ8
- Minimum Mounting Radius (mm): 35
- tube colors: clear yellow
- Total length ( m ) : 20
- Maximum Working Pressure: 0.6 MPa at 20 °C 65 %RH hours
- Working Vacuum Pressure: -100 kPa
- Operating Temperature Range: -15 to 60 °C (Without Freezing)
- Material/Finishing: TPU
- Country of origin: Japan
- Securities Code: 818 -2407
-
荷姿サイズ：500×550×100 mm 1.48 kg
[About Package size]
アズワン品番
64-4807-99
型番
UC1280-20-CY
標準価格
JPY: 7,980
USD: 50.06
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
在庫数
Supplier Stock
64-4807-99 Soft Polyurethane Tube Clear Yellow 12 x 8 20 M UC1280-20-CY
特徴
- Ideal for compact piping.
- You can also flush it.
- The cut mark useful for cutting tubes is displayed at intervals of about 500 mm.
- Use of insert ring is recommended. (If you need to ensure the drawing strength of JIS standard, use insert ring.). (JISB 8381-1))
- Make sure that the tube is not subjected to loads such as tension, torsion or extreme bending. This may cause the tube to collapse, burst, or fall out.
- The breaking pressure of the tube decreases with the increase of temperature, so please understand the working pressure well and check the safety factor with sufficient margin.
- Use the tube with a minimum bend radius.
- When attaching a tube to a one-touch joint, check whether the cut area of the tube is cut at a right angle, whether the outer diameter of the tube is scratched, and whether the tube is elliptical.
Spec
- Outer Diameter ( mm ) : 12
- Inner Diameter (mm): 8
- Minimum Bending Radius ( mm ) : 27
- Working Fluids: air, water (with conditions)
- Total length ( m ) : 20
- Tube Outer Diameter (φ D) (mm): φ 12
- Tube Inner Diameter (φD) (mm): φ8
- Minimum Mounting Radius (mm): 35
- tube colors: clear yellow
- Total length ( m ) : 20
- Maximum Working Pressure: 0.6 MPa at 20 °C 65 %RH hours
- Working Vacuum Pressure: -100 kPa
- Operating Temperature Range: -15 to 60 °C (Without Freezing)
- Material/Finishing: TPU
- Country of origin: Japan
- Securities Code: 818 -2407
Package sizePackage sizes="init">
64-4807-99 Soft Polyurethane Tube Clear Yellow 12 x 8 20 M UC1280-20-CY
特徴
- Ideal for compact piping.
- You can also flush it.
- The cut mark useful for cutting tubes is displayed at intervals of about 500 mm.
- Use of insert ring is recommended. (If you need to ensure the drawing strength of JIS standard, use insert ring.). (JISB 8381-1))
- Make sure that the tube is not subjected to loads such as tension, torsion or extreme bending. This may cause the tube to collapse, burst, or fall out.
- The breaking pressure of the tube decreases with the increase of temperature, so please understand the working pressure well and check the safety factor with sufficient margin.
- Use the tube with a minimum bend radius.
- When attaching a tube to a one-touch joint, check whether the cut area of the tube is cut at a right angle, whether the outer diameter of the tube is scratched, and whether the tube is elliptical.
仕様
- Outer Diameter ( mm ) : 12
- Inner Diameter (mm): 8
- Minimum Bending Radius ( mm ) : 27
- Working Fluids: air, water (with conditions)
- Total length ( m ) : 20
- Tube Outer Diameter (φ D) (mm): φ 12
- Tube Inner Diameter (φD) (mm): φ8
- Minimum Mounting Radius (mm): 35
- tube colors: clear yellow
- Total length ( m ) : 20
- Maximum Working Pressure: 0.6 MPa at 20 °C 65 %RH hours
- Working Vacuum Pressure: -100 kPa
- Operating Temperature Range: -15 to 60 °C (Without Freezing)
- Material/Finishing: TPU
- Country of origin: Japan
- Securities Code: 818 -2407
荷姿サイズ：500×550×100 mm 1.48 kg [About Package size]
| アズワン品番 | 64-4807-99 | |
|---|---|---|
| 型番 | UC1280-20-CY | |
| 標準価格 |
JPY: 7,980
USD: 50.06
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| 在庫数 |
|
|
| Supplier Stock |
|
|