64-4805-53 Nylon Tube Yellow Brown 8 x 6 100 M NA0860-100-YB
Features
- Excellent pressure, abrasion and cold resistance.
- Resistant to bending fatigue and can be used stably for a long time.
- Cut marks are displayed at 500 mm intervals for convenient cutting of tubes.
- Do not apply loads such as tension, twisting or extreme bending to the tube. This may cause the tube to collapse, burst, or fall out.
- Avoid scratching the tube by rubbing or tangling it. This may cause the tube to rupture.
- The breaking pressure of the tube decreases with the increase of temperature, so please understand the working pressure well and check the safety factor with sufficient margin.
- Use the tube with a minimum bend radius.
- For the piping of the tube, take into consideration the change of the length, etc., and make sufficient allowance.
Spec
- Minimum Bending Radius ( mm ) : 24
- Total length ( m ) : 100
- Working Fluids: air, water (with conditions), thermal catalyst oil (with conditions)
- Tube Outer Diameter (φD) (mm): φ8
- Tube Inner Diameter (φD) (mm): φ6
- Minimum Mounting Radius (mm): 36
- Tube color: Yellow brown
- Pressure of Use: 1.5 MPa at 20 °C 65 %RH hours
- Working Vacuum Pressure: -100 kPa
- Operating Temperature Range: -15 to 90 °C (Without Freezing)
- Material/Finishing : PA 12
- Country of origin: Japan
- Securities Code: 818 -1422
Package size：460×465×100 mm 2.74 kg [About Package size]
| Order No. | 64-4805-53 | |
|---|---|---|
| Model No. | NA0860-100-YB | |
| Standard price |
JPY: 11,430
USD: 71.65
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|