64-3767-26 Replacement Anvil Type Micrometer/104-144/with Manufacturer calibration certificate + Traceability OMC-600
Features
- This product is a set of a calibration certificate, inspection report, and tresability system chart which were calibrated by the manufacturer.
- By replacing the anvil, it is possible to increase the measurement range with one unit.
- Standard: Spindle Surface Only with Carbide Alloy Chip
- OMC-MX is a waterproof replaceable anvil type digital outer micrometer with a protection rating of IP65.
- With Constant Pressure Device
- [Note]
- You will need the document address (company name and address) for your order.
Spec
- measurement range (mm) : 500 to 600
- Minimum Displayed Amount (mm): 0.01
- Number of replacement anvils: 4
- Number of base rods: 2
- Bar breakdown: MB -525, 575 1 each
- Stroke of micrometer head (mm): 25
- IP 65 Protected grade
- Level 6: Dust resistant. There shall be no intrusion of dust.
- Level 5: Protection against jets (Water jet). The spouted water from the nozzle from any direction shall not have a detrimental effect.
- Flatness: Maximum measuring length 300 mm or less/0.6 μm, Maximum measuring length 400 Exceeding mm but 1000 mm or less/1.0 μm
- Quantization error: ± 1 count not included
- Accessories: Reference Rod 1 piece (measurement range 0 to 25 Excluding mm), Spanner (No. 301336) 1 piece
| Order No. | 64-3767-26 | |
|---|---|---|
| Model No. | OMC-600 | |
| Standard price |
JPY: 116,870
USD: 732.59
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|