Electrotherm

64-2113-33　Programmable transmitter thermocouple　LKM 262

Features

EMC Radiation/Noise Resistance: EN61326-1:2006, EN61326-2-3:2006
LKM S1 Generic Interface, RS Part Number 9130857
LKM 262 Digital Programmable Measurement Transducer
LKM 262 is a digital programmable measurement transducer for standard rail mounting applications.　This transducer can be programmed for a variety of thermocouples conforming to DIN EN60584-3 The LKM 262 linearly converts the sensor temperature-dependent thermal voltage to a standard signal.　The signal range is from 0 to 10 V.　Temperature compensation is applied on the measurement transducer itself.　This measurement transducer can be programmed using the generic interface LKM S1 available from RS.　You can make some visual corrections directly using the adjustment controller.
Input: Thermocouples K, J, L, T, U, E, N, S, B, R, C (corresponding definition ranges) 0: -200 → 600 °C depending on thermocouple * Range: 50 K Linearity error: 0.3 K depending on thermocouple Measurement error: 0.2% Reference junction error: +/- 0.5 °C Supply voltage: 15 → 35 V dc, 15 → 26 V ac (reverse polarity protection) Maximum current consumption: 20 mA Output: 0 → 10 V Programmable sensor damaged: 10 V Short circuit: Voltage value corresponding to room temperature Response time: 0.5 sec TC: 100 ppm/°C Operating temperature range: -40 → 85 °C Moisture: 95% Mounting: 35 mm DIN Rail housing: Polycarbonate 75 x 25 x 53 mm Terminal type: Threaded terminal Clamp range: 0.2 → 2.5 mm2 Approximate weight: 60 g Vibration: 5 g/10 → 200 Hz

Spec

Quantity:1piece
EMC Emission and Noise immunity:EN 61326-1:2006 EN 61326-2-3:2006. LKM S1 Universal Interface see RS Stock number 9130857. LKM 262 Digital Programmable Measuring Transducer. The LKM 262 is a digital programmable measuring transducer which is for mounting on a standard rail. The transducer can be programmed for different thermocouples according to DIN EN 60584-3. The LKM 262 converts the temperature dependent thermoelectric voltage of the sensors temperature linearly into a standard signal. The signal ranging from 0 to 10V. The temperature compensation is effected within the measuring transducer itself. The measuring transducer can be programmed by using the universal interface, LKM S1 which is available from RS. An adjusting controller allows immediate minor display corrections. Input: thermocouples K, J, L, T, U, E, N, S, B, R, C in the respective range of definition Zero: -200 to 600°C* depending on thermocouple Range: 50K Linearity error: 0.3K depending on the thermocouple Measurement error: 0.2% Error of reference junction: +/- 0.5°C Supply voltage: 15 to 35VDC, 15 to 26VAC reverse polarity protected Maximum current consumption: 20mA Output: 0 to 10V programmable Sensor break: 10V Short-circuit: voltage value for room temperature Response time: 0.5s TC: 100ppm/°C Operating temperature range: -40 to 85°C Moisture: 95% Mounting: 35mm DIN-rail Housing: Polycarbonate 75x25x53mm Type of terminals: screw terminals Clamping range: 0.2 to 2.5mm² Weight: approx. 60g Vibration: 5g/10 to 200Hz
CODE No.:913-0841

Order No.	64-2113-33
Model No.	LKM 262
Standard price	JPY: 29,300 USD: 182.31 Excange rate 1USD= 160.72JPY Valid price in Japan
Quantity	1piece
Stock in Japan
Supplier Stock