Electrotherm

64-2113-32　Programmable transmitter thermocouple　LKM 261

Features

EMC Radiation/Noise Resistance: EN61326-1:2006, EN61326-2-3:2006 • LKM 261 Digital Programmable Measurement Transducer • The LKM 261 is a digital programmable measurement transducer for standard rail mounting applications.　This transducer can be programmed for various thermocouples conforming to DIN EN60584-3 The LKM 261 converts the temperature-dependent thermal voltage of the sensor into a standard signal in the range 4 → 20 mA.　Temperature compensation is applied to the measurement transducer.　This transducer can be programmed using the generic interface type LKM S1 available from RS.　You can make some visual corrections directly using the adjustment controller.
Input: Thermocouples K, J, L, T, U, E, N, S, B, R, C (corresponding definition ranges) 0: -200 → 600 °C* Range: 50 K Linearity error: 0.3 K depending on thermocouple Reference junction error: +/- 0.5 °C Loop voltage: 10 → 35 V dc, reverse polarity protection output: 4 → 20 mA Current loop sensor damage: 20 mA Short circuit: Current value corresponding to room temperature Reaction time: 0.5 s TC: 100 ppm/°C Operating temperature range: -40 → 85 °C Moisture: 95% Mounting: 35 mm DIN Rail terminal type: Threaded terminal Clamp range: 0.2 → 2.5 mm2 Housing: Polycarbonate 75 x 25 x 53 mm Approximate weight: 60 g Vibration: 5 g/10 → 200 Hz

Quantity:1piece
EMC Emission and Noise immunity:EN 61326-1:2006 EN 61326-2-3:2006. LKM 261 Digital Programmable Measuring Transducer. The LKM 261 is a digital programmable measuring transducer intended for mounting on a standard rail. The transducer can be programmed for different thermocouples according to DIN EN 60584-3. The LKM 261 converts the temperature dependent thermoelectric voltage of the sensors into a standard signal which ranges from 4 to 20mA. The temperature compensation is effected within the measuring transducer. The transducer can be programmed by using the universal interface type LKM S1 which is available from RS. An adjusting controller allows immediate minor display corrections. Input: thermocouples K, J, L, T, U, E, N, S, B, R, C in the respective range of definition Zero: -200 to 600°C* Range: 50K Linearity error: 0.3K depending upon the thermocouple Error of reference junction: +/- 0.5°C Loop voltage: 10 to35V DC, reverse polarity protected Output: 4 to 20mA current loop Sensor break: 20mA Short circuit: current value for room temperature Reaction time: 0.5s TC: 100ppm/°C Operating temperature range: -40 to 85°C Moisture: 95% Mounting: 35mm DIN-rail Type of terminals: screw terminals Clamping range: 0.2 to 2.5mm² Housing: Polycarbonate 75x25x53mm Weight: approx. 60g Vibration: 5g/10.200Hz
CODE No.:913-0832

Order No.	64-2113-32
Model No.	LKM 261
Standard price	JPY: 29,300 USD: 182.31 Excange rate 1USD= 160.72JPY Valid price in Japan
Quantity	1piece
Stock in Japan
Supplier Stock