64-1275-80 Schneider Electric VW3A4552 EMI Filter Motor Choke 155mm Length,, 10 A VW3A4552
Features
- Altivar AC Line Choke. A line choke can be used to provide improved protection against overvoltages on the line supply and to reduce the current harmonics produced by the drive. The recommended chokes can be used to limit the line current. They have been developed in line with standard EN 50178 (VDE 0160 level 1 high energy overvoltages on the line supply). The inductance values are defined for a voltage drop between phases of between 3% and 5% of the nominal line voltage. Values higher than this will cause loss of torque. These chokes should be installed upstream of the drive. The use of line chokes is recommended in particular under the following circumstances: Close connection of several drives in parallel Line supply with significant disturbance from other equipment (interference, overvoltages) Line supply with voltage imbalance between phases above 1.8% of the nominal voltage Drive supplied by a line with very low impedance (in the vicinity of a power transformer 10 times more powerful than the drive rating) Installation of a large number of frequency converters on the same line Reduction of overload in cos Ø correction capacitors, if the installation has a power factor correction unit
SpecSpec class="init">
64-1275-80 Schneider Electric VW3A4552 EMI Filter Motor Choke 155mm Length,, 10 A VW3A4552 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Schneider Electric
64-1275-80 Schneider Electric VW3A4552 EMI Filter Motor Choke 155mm Length,, 10 A VW3A4552
-
特徴
- Altivar AC Line Choke. A line choke can be used to provide improved protection against overvoltages on the line supply and to reduce the current harmonics produced by the drive. The recommended chokes can be used to limit the line current. They have been developed in line with standard EN 50178 (VDE 0160 level 1 high energy overvoltages on the line supply). The inductance values are defined for a voltage drop between phases of between 3% and 5% of the nominal line voltage. Values higher than this will cause loss of torque. These chokes should be installed upstream of the drive. The use of line chokes is recommended in particular under the following circumstances: Close connection of several drives in parallel Line supply with significant disturbance from other equipment (interference, overvoltages) Line supply with voltage imbalance between phases above 1.8% of the nominal voltage Drive supplied by a line with very low impedance (in the vicinity of a power transformer 10 times more powerful than the drive rating) Installation of a large number of frequency converters on the same line Reduction of overload in cos Ø correction capacitors, if the installation has a power factor correction unit
Spec
- Quantity:1piece
- Accessory Type:Choke
- Current Rating:10 A
- Electrical Phase:3
- Length:155mm
- Width:130mm
- Depth:90mm
- Dimensions:155 x 130 x 90 mm
- CODE No.:797-0785
-
アズワン品番
64-1275-80
型番
VW3A4552
Standard price
JPY: 308,000
USD: 1,932.00
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
在庫数
Supplier StockSupplier Stock"init">
64-1275-80 Schneider Electric VW3A4552 EMI Filter Motor Choke 155mm Length,, 10 A VW3A4552 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Schneider Electric
64-1275-80 Schneider Electric VW3A4552 EMI Filter Motor Choke 155mm Length,, 10 A VW3A4552
-
特徴
- Altivar AC Line Choke. A line choke can be used to provide improved protection against overvoltages on the line supply and to reduce the current harmonics produced by the drive. The recommended chokes can be used to limit the line current. They have been developed in line with standard EN 50178 (VDE 0160 level 1 high energy overvoltages on the line supply). The inductance values are defined for a voltage drop between phases of between 3% and 5% of the nominal line voltage. Values higher than this will cause loss of torque. These chokes should be installed upstream of the drive. The use of line chokes is recommended in particular under the following circumstances: Close connection of several drives in parallel Line supply with significant disturbance from other equipment (interference, overvoltages) Line supply with voltage imbalance between phases above 1.8% of the nominal voltage Drive supplied by a line with very low impedance (in the vicinity of a power transformer 10 times more powerful than the drive rating) Installation of a large number of frequency converters on the same line Reduction of overload in cos Ø correction capacitors, if the installation has a power factor correction unit
仕様
- Quantity:1piece
- Accessory Type:Choke
- Current Rating:10 A
- Electrical Phase:3
- Length:155mm
- Width:130mm
- Depth:90mm
- Dimensions:155 x 130 x 90 mm
- CODE No.:797-0785
-
アズワン品番
64-1275-80
型番
VW3A4552
標準価格
JPY: 308,000
USD: 1,932.00
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
64-1275-80 Schneider Electric VW3A4552 EMI Filter Motor Choke 155mm Length,, 10 A VW3A4552
特徴
- Altivar AC Line Choke. A line choke can be used to provide improved protection against overvoltages on the line supply and to reduce the current harmonics produced by the drive. The recommended chokes can be used to limit the line current. They have been developed in line with standard EN 50178 (VDE 0160 level 1 high energy overvoltages on the line supply). The inductance values are defined for a voltage drop between phases of between 3% and 5% of the nominal line voltage. Values higher than this will cause loss of torque. These chokes should be installed upstream of the drive. The use of line chokes is recommended in particular under the following circumstances: Close connection of several drives in parallel Line supply with significant disturbance from other equipment (interference, overvoltages) Line supply with voltage imbalance between phases above 1.8% of the nominal voltage Drive supplied by a line with very low impedance (in the vicinity of a power transformer 10 times more powerful than the drive rating) Installation of a large number of frequency converters on the same line Reduction of overload in cos Ø correction capacitors, if the installation has a power factor correction unit
Spec
- Quantity:1piece
- Accessory Type:Choke
- Current Rating:10 A
- Electrical Phase:3
- Length:155mm
- Width:130mm
- Depth:90mm
- Dimensions:155 x 130 x 90 mm
- CODE No.:797-0785
| アズワン品番 | 64-1275-80 | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 型番 | VW3A4552 | ||||||||||||||
| Standard price |
JPY: 308,000
USD: 1,932.00
Excange rate 1USD= 159.42JPY
Valid price in Japan |
||||||||||||||
| Quantity | 1piece | ||||||||||||||
| 在庫数 |
|
||||||||||||||
Supplier StockSupplier Stock"init">
64-1275-80 Schneider Electric VW3A4552 EMI Filter Motor Choke 155mm Length,, 10 A VW3A4552特徴
仕様
| |||||||||||||||