64-1029-98 Large Blower Constant Temperature Dryer DRLA22WB
Features
- Equipped with double doors, excellent workability and advantageous for installation.
- Program operation can be set easily. Cooling can also be performed quickly by using cooling after operation.
- During program operation, the operation status (Temperature rise, fall, control) is displayed.
- In addition to the safety equipment provided with the temperature controller, a heat-sensitive independent overheat prevention device is installed to monitor and prevent overheating of the device in duplicate.
SpecFeatures class="init">
64-1029-98 Large Blower Constant Temperature Dryer DRLA22WB 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
ADVANTEC
64-1029-98 Large Blower Constant Temperature Dryer DRLA22WB
-
特徴
- Equipped with double doors, excellent workability and advantageous for installation.
- Program operation can be set easily. Cooling can also be performed quickly by using cooling after operation.
- During program operation, the operation status (Temperature rise, fall, control) is displayed.
- In addition to the safety equipment provided with the temperature controller, a heat-sensitive independent overheat prevention device is installed to monitor and prevent overheating of the device in duplicate.
Spec
- convection formula : Blower type (Right Callout, Horizontal)
- Operating temperature range (°C): R.T. + 50 °C to 200 °C
- Temperature adjustment precision (°C): ± 0.5 °C at 200 °C
- Temperature distribution accuracy (°C): ± 3 °C at 200 °C
- Temperature rise time: about 60 minutes, from R.T. to 200 °C
- Ambient operating temperature: 5 °C, to 35 °C
- temperature controller: Microcomputer PID Control (TC-SVI System)
- Operation type: Standard Operation, Program Operation (maximum 100 steps) 1 minute, to 99 hours 59 minutes
- Temperature sensor: K class thermocouple
- Heater: Stainless Steel Fin Heater
- Heater capacity (kW): 9
- Blower Fan: Sirocco Fan (Aluminum) 3 pieces
- Interior: SUS304
- Door Packing: Silicone Rubber
- Safety device: self-diagnostic function (Overheating, temperature sensor error, heater disconnection, SSR short circuit, ambient temperature error), independent overheat protection device, blower overload protection device, blower reverse rotation protection device (three-phase chisel), control circuit protection fuse, key lock function, overcurrent/earth leakage breaker
- inner dimension (mm): W 1,000 x D 800 x H 1,000 [H 935]
- external dimensions ( mm ) : W 1,605 x D 1,060 x H 1,735
- Internal volume (approx. L): 800
- number of shelves/pitch: 4 stages/240 mm (Fixed Shelf Support)
- Exhaust Port: φ 125 mm
- power supply (50Hz/60Hz): 200 VAC Single-phase 53.5 A
- Required power supply Equipment: 200 VAC Single-Phase 60 A
- Mass (approx. kg): 480
- Accessories: shelf board 2 pieces, Floor Fixing metal bracket 4 pieces
-
Package size：1605×1060×1735 mm 480 kg
[About Package size]
Order No.
64-1029-98
Model No.
DRLA22WB
Standard price
JPY: -
USD: -
Excange rate 1USD= 160.72JPY
Valid price in Japan
QuantityQuantityass="init">
64-1029-98 Large Blower Constant Temperature Dryer DRLA22WB 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
ADVANTEC
64-1029-98 Large Blower Constant Temperature Dryer DRLA22WB
-
特徴
- Equipped with double doors, excellent workability and advantageous for installation.
- Program operation can be set easily. Cooling can also be performed quickly by using cooling after operation.
- During program operation, the operation status (Temperature rise, fall, control) is displayed.
- In addition to the safety equipment provided with the temperature controller, a heat-sensitive independent overheat prevention device is installed to monitor and prevent overheating of the device in duplicate.
仕様
- convection formula : Blower type (Right Callout, Horizontal)
- Operating temperature range (°C): R.T. + 50 °C to 200 °C
- Temperature adjustment precision (°C): ± 0.5 °C at 200 °C
- Temperature distribution accuracy (°C): ± 3 °C at 200 °C
- Temperature rise time: about 60 minutes, from R.T. to 200 °C
- Ambient operating temperature: 5 °C, to 35 °C
- temperature controller: Microcomputer PID Control (TC-SVI System)
- Operation type: Standard Operation, Program Operation (maximum 100 steps) 1 minute, to 99 hours 59 minutes
- Temperature sensor: K class thermocouple
- Heater: Stainless Steel Fin Heater
- Heater capacity (kW): 9
- Blower Fan: Sirocco Fan (Aluminum) 3 pieces
- Interior: SUS304
- Door Packing: Silicone Rubber
- Safety device: self-diagnostic function (Overheating, temperature sensor error, heater disconnection, SSR short circuit, ambient temperature error), independent overheat protection device, blower overload protection device, blower reverse rotation protection device (three-phase chisel), control circuit protection fuse, key lock function, overcurrent/earth leakage breaker
- inner dimension (mm): W 1,000 x D 800 x H 1,000 [H 935]
- external dimensions ( mm ) : W 1,605 x D 1,060 x H 1,735
- Internal volume (approx. L): 800
- number of shelves/pitch: 4 stages/240 mm (Fixed Shelf Support)
- Exhaust Port: φ 125 mm
- power supply (50Hz/60Hz): 200 VAC Single-phase 53.5 A
- Required power supply Equipment: 200 VAC Single-Phase 60 A
- Mass (approx. kg): 480
- Accessories: shelf board 2 pieces, Floor Fixing metal bracket 4 pieces
-
荷姿サイズ：1605×1060×1735 mm 480 kg
[荷姿サイズについて]
アズワン品番
64-1029-98
型番
DRLA22WB
標準価格
JPY: -
USD: -
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1unit
在庫数
Supplier Stock
64-1029-98 Large Blower Constant Temperature Dryer DRLA22WB
特徴
- Equipped with double doors, excellent workability and advantageous for installation.
- Program operation can be set easily. Cooling can also be performed quickly by using cooling after operation.
- During program operation, the operation status (Temperature rise, fall, control) is displayed.
- In addition to the safety equipment provided with the temperature controller, a heat-sensitive independent overheat prevention device is installed to monitor and prevent overheating of the device in duplicate.
Spec
- convection formula : Blower type (Right Callout, Horizontal)
- Operating temperature range (°C): R.T. + 50 °C to 200 °C
- Temperature adjustment precision (°C): ± 0.5 °C at 200 °C
- Temperature distribution accuracy (°C): ± 3 °C at 200 °C
- Temperature rise time: about 60 minutes, from R.T. to 200 °C
- Ambient operating temperature: 5 °C, to 35 °C
- temperature controller: Microcomputer PID Control (TC-SVI System)
- Operation type: Standard Operation, Program Operation (maximum 100 steps) 1 minute, to 99 hours 59 minutes
- Temperature sensor: K class thermocouple
- Heater: Stainless Steel Fin Heater
- Heater capacity (kW): 9
- Blower Fan: Sirocco Fan (Aluminum) 3 pieces
- Interior: SUS304
- Door Packing: Silicone Rubber
- Safety device: self-diagnostic function (Overheating, temperature sensor error, heater disconnection, SSR short circuit, ambient temperature error), independent overheat protection device, blower overload protection device, blower reverse rotation protection device (three-phase chisel), control circuit protection fuse, key lock function, overcurrent/earth leakage breaker
- inner dimension (mm): W 1,000 x D 800 x H 1,000 [H 935]
- external dimensions ( mm ) : W 1,605 x D 1,060 x H 1,735
- Internal volume (approx. L): 800
- number of shelves/pitch: 4 stages/240 mm (Fixed Shelf Support)
- Exhaust Port: φ 125 mm
- power supply (50Hz/60Hz): 200 VAC Single-phase 53.5 A
- Required power supply Equipment: 200 VAC Single-Phase 60 A
- Mass (approx. kg): 480
- Accessories: shelf board 2 pieces, Floor Fixing metal bracket 4 pieces
Package size：1605×1060×1735 mm 480 kg [About Package size]
| Order No. | 64-1029-98 | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model No. | DRLA22WB | ||||||||||||||
| Standard price |
JPY: -
USD: -
Excange rate 1USD= 160.72JPY
Valid price in Japan |
||||||||||||||
QuantityQuantityass="init">
64-1029-98 Large Blower Constant Temperature Dryer DRLA22WB特徴
仕様
荷姿サイズ：1605×1060×1735 mm 480 kg [荷姿サイズについて]
| |||||||||||||||