SANWA SUPPLY INC.

64-0900-27 Gigabit Switching Hub 5-Port PoE Powered Feed Dual Support LAN-GIH5PSEPD

Features

  • Gigabit Switching Hub (5 Ports) Powered by PoE and capable of supplying power as is
  • 5-port 10BASE-T/100BASE-TX/1000BASE-T compatible switching hub.
  • * Only for PoE. AC adapter is not included.
  • Port 5 is a PoE powered port, and it is a hub that supports both PSE and PD and can power each device from port 1~4.
  • The power cable is not required because the unit is powered by PoE.
  • * To receive power, you need to connect to a hub or injector that supports PoE output.
  • It has a loop detection function. When a loop is detected, an LED is displayed.
  • It's small, so it doesn't take up much space for installation.
  • Communication and power supply status can be checked by LED.
  • < Cautionary note > The amount of heat generated differs between the case the machine is energized only and the case it is communicating. In particular, a large amount of continuous communication may cause the unit to overheat. Therefore, continuous use in environments with poor heat dissipation (low ventilation) can lead to deterioration of internal components and reduce product life. When using, please be careful not to put anything on the upper part of the main body, and leave more than 10 cm of space for the ventilation opening. The operating temperature is the temperature under continuous use, not during installation. Please note that there is a large change in the operating condition compared to the initial energization.
  • < Cautionary notes on PoE power supply >
  • * For the cable to be used for PoE power supply, select Category 6 straight cable or AWG24 or thicker. Recommended Cable (Sanwa Supply Co., Ltd.) • KB-T6POE series (AWG22) • KB-T6L series (AWG23) • KB-T5T series (AWG24 single wire) • * Before using the power receiving device (PD), check the required power.
  • * This product is for indoor use.

Spec

  • standards — IEEE 802.3 (10 BASE-T Ethernet) IEEE 802.3 u (100 BASE-TX Fast Ethernet) IEEE 802.3 ab (1000 BASET-T) IEEE 802.3 x (Flowcontrol for Full - Duplex) IEEE 802.3 af/at (PoweroverEthernet/PoweroverEthernet Plus) IEEE 802.3 az (EnergyEfficient Ethernet)
  • access methods: CSMA/CD
  • switching methods: Store & Forward
  • Transmission method: 10 Mbps/100 Mbps: full-duplex, half-duplex 1000 Mbps: full-duplex
  • Port configuration: 1 to 4-port: 1000 BASE-T/100 BASE-TX/10 BASE-T (RJ -45) AUTO-MDIX PoE support 5 port: 1000 BASE-T/100 BASE-TX/10 BASE-T (RJ -45) AUTO-MDIX PoE support
  • LED Display power supply ON/OFF Status: Link/Act Status: Each Port Green LED On/Blinks PoE Status: Each Port Amber LED On/Off (1 to 4 port powered, 5 port powered) power supply Status: Power Display Amber LED On/Off Loop Detection Status: LOOP Display Red LED On/Off
  • Buffer Memory: 128 kbytes
  • MAC address tables: 2K
  • Size: approx. W 130 x D 97 x H 24 mm
  • Weight cookies: about 330 g
  • Body Power Consumption: Approx. 5W
  • Maximum draw: When powered by IEEE 802.3 af: Approximately 10 WTotal When powered by IEEE 802.3 at: Approximately 25 W Total
  • Operating Environment: Operating Temperature/0 to 4 ° C, Storage Temperature/-20 to 70 ° C, Operating Humidity/10 to 90%, Storage Humidity/5 to 90% (No condensation)
  • Accessories: Instruction Manual (warranty) x 1 copy
  •  

Package size:215×32×152 mm 430 g  [About Package size]

Order No. 64-0900-27
Model No. LAN-GIH5PSEPD
JAN Code 4969887752890
Standard price JPY: 48,000 USD: 301.09
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Catalog

Catalog Name Page
AS ONE Catalog 2025 [Instruments for Laboratory] 2622