Features

• Easily copy HDD without PC! With an indicator, you can see the transfer amount at a glance.
• Up to two HDDs can be connected and used simultaneously.
• You can copy entire data from a SATAHDD to a SATAHDD without connecting to a computer, making it ideal for moving a computer, etc.
• It supports USB3.0 and can transfer data at high speed.
• You can connect an optical drive (CD/DVD/Blu-ray).
• * When an optical drive is connected, the HDD cannot be connected. Only one optical drive is supported.
• Large capacity can support up to 3TB in total. 1. When copying data between HDDs (when not using a PC), if there is data in the destination HDD, move it to another location. All data is deleted and cannot be restored. 2.When copying between hard drives (when not using a PC), be sure to do so on a flat surface.
• * The connector may come off during work, causing data loss. 3.Connect the copy destination HDD with the same capacity or larger than the copy source HDD. If the capacity is smaller than the source, copying will not start. 4.If two hard drives are connected, they are recognized separately. There is no function of the combine to recognize two units as one unit. 5.The maximum capacity of the HDD that can be connected to the machine is 3TB in total. Space limitations may apply depending on the operating system of your computer. 6.If the access LED (SATA1) does not stop blinking after a sufficient period of time to complete the copy from one hard drive to another, there may be a bad sector in the hard drive data that prevents the copy from proceeding. In that case, copy between HDDs is not possible. 7.When copying from one HDD to another, the area of the "destination HDD" difference is the raw area. You can use this function by connecting to a computer and formatting the unformatted part.