SANWA SUPPLY INC.

64-0870-27　Display Extender Receiver power supply Unnecessary Set Model　VGA-EXSET3

Features

Display Extender Extends Video Signals Using an Easy-to-Install LAN Cable with No Power Supply at the Receiver
Since no power supply is required at the receiver, this display extender is easy to install in environments where it is difficult to secure power, such as ceiling mounted displays.
You can extend the analog display signal to a display up to 80 meters away.
It consists of a set of transmitters and receivers that can be extended between units using UTP/STP category 5/5e straight cables.
Because it uses Category 5/5e cable, it is easy to rotate and has excellent cost performance compared to normal display cable.
The receiver section has an image quality adjustment function. You can adjust the image signal using simple operations.
The AC adapter used on the transmitter side is a screw fixed type that prevents it from falling off.

Spec

Compatible personal computer: With Windows (DOS/V) personal computer, Apple Macintosh
*Models with mini D-sub (HD) 15 pin display connector.
Supported displays: Multi-scan display with mini D-sub (HD) 15 pin display connector
*If the display cannot correct the screen position, the screen may be slightly shifted to the left or right.
Maximum display resolution: 1920 x 1200 dots (WUXGA)
*Maximum 50 m Extendable 1920 x 1080 Dots (Full HD/1080 P)
*Maximum 50 m Extendable 1280 x 720 Dots (720 p)
*Extension up to 80 m
Supported LAN Cables: UTP/STP Category 5/5 e Straight Cables
Extension Cable Length: 80 m (Maximum)
VGA bandwidth: 150 MHz
Interface Transmitter: Input: Mini D-sub (HD) 15 pin Female x 1 Output: RJ -45 Female x 1 Receiver: Input: RJ -45 Female x 1 Output: Mini D-sub (HD) 15 pin Female x 1
Current consumption transmitter: 1.2 W receiver: 4.5 W
Case Material: Steel
Environmental Conditions: Operating/5 to 40 ° C Humidity 10% to 80% or Less (No condensation), Storage/-20 to 60 ° C Humidity 10% to 80% or Less (No condensation)
Size: Transmitter/W 104 x D 59 x H 25 mm (main unit size), Receiver/W 104 x D 59 x H 25 mm (main unit size)
Weight: Transmitter/153 g, Receiver/155 g
Accessories: Transmitter x 1, Receiver x 1 Mini D-sub (HD) 15 pin male/male Straight All Connections 1.2 m x 1 AC Adapter (12 VDC, 1.25 A) x 1 Operation Manual (Guaranteed) x 1 Note 1: This product supplies power to the receiver side via LAN cable and is not a PoE standards product. Note 2: This product uses Straight cable of UTP/STP category 5/5 e 1 piece. Please purchase separately. Note 3: The receiver also has an AC adapter jack, which is not normally used. Due to the quality of the LAN cable, the power may not be supplied normally even if the distance is extended to 80 m or less. In that case, please purchase AC adapter (P - VGA - AC3) which is sold separately. [When the image is dark or does not appear even though the cable length is within the specification range] environment used LAN cable quality may prevent adequate power supply. Try the LAN cable on a different product or connect an optional AC adapter to the receiver to provide power.
*In this case, an AC adapter must be connected to the receiver and power supply must be secured. ) AC adapter sold separately: Sunwa Supply P-VGA-AC3

Package size：305×68×252 mm　1.04 kg　 [About Package size]

Order No.	64-0870-27
Model No.	VGA-EXSET3
JAN Code	4969887592793
Standard price	JPY: 36,800 USD: 230.68 Excange rate 1USD= 159.53JPY Valid price in Japan
Quantity	1piece
Stock in Japan
Supplier Stock