64-0854-73 ［Discontinued］Earthquake resistant Stopper With 2 pieces QL-78
FeaturesFeatures class="init">
［Discontinued］Earthquake resistant Stopper With 2 pieces QL-78 64-0854-73 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SANWA SUPPLY INC.
64-0854-73 ［Discontinued］Earthquake resistant Stopper With 2 pieces QL-78
-
特徴
- A stopper that absorbs vibration and prevents a cabinet from tipping over.
- 2 pieces.
- The special material polyurethane foam absorbs shaking firmly.
- You can just put it on. A safe and secure design that does not scratch walls.
- Can be mounted on either the top or side. (Please attach it to the top as much as possible)
- Can be used even if the back is open like a TV stand.
- 1. Move the object about 20~30 cm away from the wall and peel off the smaller strip of paper.
- 2. Attach the peeled surface of the peeling paper to the object and press it hard 3~4 times.
- 3. Peel off the peeling paper on the wall side, attach it in the same way, and press hard against the wall 3~4 times.
- 4. As long as there is no damage to the cloth adhesive material or sponge and no dirt on the adhesive surface, it can be used repeatedly.
- 1. Slowly pull the object forward until you can place your hand between the object and the wall, put your finger between the material and the wall, and then remove the material attached to the object.
- 2. If the material is strongly stuck to the object or the wall due to long-term mounting, etc., do not try to remove it forcibly. Remove it little by little using a commercially available tape remover or cut the sponge with a cutter, etc., and then use the tape remover to remove it without damaging the wall.
- < Wall materials that cannot be mounted > • Cement mortar, hemlock plaster (sand or powder peels off from the surface), soft wallpaper (soft and easy to peel off when pressed with fingers), cork wallpaper (cork on the surface), paper wallpaper (wallpaper made of Japanese paper or paper cloth), fusuma, shoji, etc.
SpecSpec class="init">
［Discontinued］Earthquake resistant Stopper With 2 pieces QL-78 64-0854-73 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SANWA SUPPLY INC.
64-0854-73 ［Discontinued］Earthquake resistant Stopper With 2 pieces QL-78
-
特徴
- A stopper that absorbs vibration and prevents a cabinet from tipping over.
- 2 pieces.
- The special material polyurethane foam absorbs shaking firmly.
- You can just put it on. A safe and secure design that does not scratch walls.
- Can be mounted on either the top or side. (Please attach it to the top as much as possible)
- Can be used even if the back is open like a TV stand.
- 1. Move the object about 20~30 cm away from the wall and peel off the smaller strip of paper.
- 2. Attach the peeled surface of the peeling paper to the object and press it hard 3~4 times.
- 3. Peel off the peeling paper on the wall side, attach it in the same way, and press hard against the wall 3~4 times.
- 4. As long as there is no damage to the cloth adhesive material or sponge and no dirt on the adhesive surface, it can be used repeatedly.
- 1. Slowly pull the object forward until you can place your hand between the object and the wall, put your finger between the material and the wall, and then remove the material attached to the object.
- 2. If the material is strongly stuck to the object or the wall due to long-term mounting, etc., do not try to remove it forcibly. Remove it little by little using a commercially available tape remover or cut the sponge with a cutter, etc., and then use the tape remover to remove it without damaging the wall.
- < Wall materials that cannot be mounted > • Cement mortar, hemlock plaster (sand or powder peels off from the surface), soft wallpaper (soft and easy to peel off when pressed with fingers), cork wallpaper (cork on the surface), paper wallpaper (wallpaper made of Japanese paper or paper cloth), fusuma, shoji, etc.
仕様
- earthquake resistant degree : 7
- Mounting standard (if the centre of gravity is less than or equal to the centre of gravity): Depth 45 cm or more/Height 210 cm or less, width 90 cm or less, Weight 150 kg proven (including contents) Depth 30 to 45 cm or less/Height 180 cm or less, width 90 cm or less, Weight 115 kg proven (including contents)
- Approximate Mounting Number: Total Weight 150 kg/1 Set, 300 kg/2 Sets, 450 kg/3 Sets
- Useful life: 8 years
- Applicable Temperature: -10 to 50 ° C
- material: ABS Plastic, Polyurethane foam, fabric adhesive.
- Size: W 127 x D 85.8 x H 85 mm
- Cloth Adhesive Size: W 94 x H 50 mm (Smaller side of the object), W 120 x H 80 mm (Larger side of the wall)
- Color: Brown
- Quantity : 2 pieces
- Country of origin: Japan
- *For casters, use a commercially available stopper for casters together.
- *When mounting to a personal computer rack, TV bench, etc., make sure that the top board and side plates to be bonded are securely fixed to the product and in contact with the wall surface.
- *Before mounting, check that the wall and the mounting area of the object are not damaged.
- *Improper performance may not be achieved if dirt, dust, moisture or oil remains in the mounting area.
- *Do not use the product in areas exposed to direct sunlight, wind or rain.
- *Do not use alcohol or thinner as it may deform the product.
- *If items are placed on top of this product, sufficient performance may not be achieved.
- *The useful life of this product is 8 years, but it should be replaced or discontinued after periodic confirmation.
- *We are not responsible for damage to objects or walls during installation or removal.
- *This product minimizes the falling of objects caused by shaking. Please note that we are not responsible for any damage caused by earthquakes.
-
Package size：114×86×170 mm 220 g
[About Package size]
アズワン品番
64-0854-73
型番
QL-78
JANコード
4969887851876
標準価格
JPY: 2,980
USD: 18.68
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1set
![<!--@[ia-1]@-->取扱停止<!--@/[ia-1]@-->](/en/asone/img/usestop_en_US.png?v=03790be0f2ba82c1280907a7033cf49dabaaa7c1)
在庫数
-
64-0854-73 ［Discontinued］Earthquake resistant Stopper With 2 pieces QL-78
特徴
- A stopper that absorbs vibration and prevents a cabinet from tipping over.
- 2 pieces.
- The special material polyurethane foam absorbs shaking firmly.
- You can just put it on. A safe and secure design that does not scratch walls.
- Can be mounted on either the top or side. (Please attach it to the top as much as possible)
- Can be used even if the back is open like a TV stand.
- 1. Move the object about 20~30 cm away from the wall and peel off the smaller strip of paper.
- 2. Attach the peeled surface of the peeling paper to the object and press it hard 3~4 times.
- 3. Peel off the peeling paper on the wall side, attach it in the same way, and press hard against the wall 3~4 times.
- 4. As long as there is no damage to the cloth adhesive material or sponge and no dirt on the adhesive surface, it can be used repeatedly.
- 1. Slowly pull the object forward until you can place your hand between the object and the wall, put your finger between the material and the wall, and then remove the material attached to the object.
- 2. If the material is strongly stuck to the object or the wall due to long-term mounting, etc., do not try to remove it forcibly. Remove it little by little using a commercially available tape remover or cut the sponge with a cutter, etc., and then use the tape remover to remove it without damaging the wall.
- < Wall materials that cannot be mounted > • Cement mortar, hemlock plaster (sand or powder peels off from the surface), soft wallpaper (soft and easy to peel off when pressed with fingers), cork wallpaper (cork on the surface), paper wallpaper (wallpaper made of Japanese paper or paper cloth), fusuma, shoji, etc.
SpecSpec class="init">
［Discontinued］Earthquake resistant Stopper With 2 pieces QL-78 64-0854-73 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SANWA SUPPLY INC.
64-0854-73 ［Discontinued］Earthquake resistant Stopper With 2 pieces QL-78
-
特徴
- A stopper that absorbs vibration and prevents a cabinet from tipping over.
- 2 pieces.
- The special material polyurethane foam absorbs shaking firmly.
- You can just put it on. A safe and secure design that does not scratch walls.
- Can be mounted on either the top or side. (Please attach it to the top as much as possible)
- Can be used even if the back is open like a TV stand.
- 1. Move the object about 20~30 cm away from the wall and peel off the smaller strip of paper.
- 2. Attach the peeled surface of the peeling paper to the object and press it hard 3~4 times.
- 3. Peel off the peeling paper on the wall side, attach it in the same way, and press hard against the wall 3~4 times.
- 4. As long as there is no damage to the cloth adhesive material or sponge and no dirt on the adhesive surface, it can be used repeatedly.
- 1. Slowly pull the object forward until you can place your hand between the object and the wall, put your finger between the material and the wall, and then remove the material attached to the object.
- 2. If the material is strongly stuck to the object or the wall due to long-term mounting, etc., do not try to remove it forcibly. Remove it little by little using a commercially available tape remover or cut the sponge with a cutter, etc., and then use the tape remover to remove it without damaging the wall.
- < Wall materials that cannot be mounted > • Cement mortar, hemlock plaster (sand or powder peels off from the surface), soft wallpaper (soft and easy to peel off when pressed with fingers), cork wallpaper (cork on the surface), paper wallpaper (wallpaper made of Japanese paper or paper cloth), fusuma, shoji, etc.
仕様
- earthquake resistant degree : 7
- Mounting standard (if the centre of gravity is less than or equal to the centre of gravity): Depth 45 cm or more/Height 210 cm or less, width 90 cm or less, Weight 150 kg proven (including contents) Depth 30 to 45 cm or less/Height 180 cm or less, width 90 cm or less, Weight 115 kg proven (including contents)
- Approximate Mounting Number: Total Weight 150 kg/1 Set, 300 kg/2 Sets, 450 kg/3 Sets
- Useful life: 8 years
- Applicable Temperature: -10 to 50 ° C
- material: ABS Plastic, Polyurethane foam, fabric adhesive.
- Size: W 127 x D 85.8 x H 85 mm
- Cloth Adhesive Size: W 94 x H 50 mm (Smaller side of the object), W 120 x H 80 mm (Larger side of the wall)
- Color: Brown
- Quantity : 2 pieces
- Country of origin: Japan
- *For casters, use a commercially available stopper for casters together.
- *When mounting to a personal computer rack, TV bench, etc., make sure that the top board and side plates to be bonded are securely fixed to the product and in contact with the wall surface.
- *Before mounting, check that the wall and the mounting area of the object are not damaged.
- *Improper performance may not be achieved if dirt, dust, moisture or oil remains in the mounting area.
- *Do not use the product in areas exposed to direct sunlight, wind or rain.
- *Do not use alcohol or thinner as it may deform the product.
- *If items are placed on top of this product, sufficient performance may not be achieved.
- *The useful life of this product is 8 years, but it should be replaced or discontinued after periodic confirmation.
- *We are not responsible for damage to objects or walls during installation or removal.
- *This product minimizes the falling of objects caused by shaking. Please note that we are not responsible for any damage caused by earthquakes.
-
Package size：114×86×170 mm 220 g
[About Package size]
アズワン品番
64-0854-73
型番
QL-78
JANコード
4969887851876
標準価格
JPY: 2,980
USD: 18.68
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1set
在庫数
-
64-0854-73 ［Discontinued］Earthquake resistant Stopper With 2 pieces QL-78
特徴
- A stopper that absorbs vibration and prevents a cabinet from tipping over.
- 2 pieces.
- The special material polyurethane foam absorbs shaking firmly.
- You can just put it on. A safe and secure design that does not scratch walls.
- Can be mounted on either the top or side. (Please attach it to the top as much as possible)
- Can be used even if the back is open like a TV stand.
- 1. Move the object about 20~30 cm away from the wall and peel off the smaller strip of paper.
- 2. Attach the peeled surface of the peeling paper to the object and press it hard 3~4 times.
- 3. Peel off the peeling paper on the wall side, attach it in the same way, and press hard against the wall 3~4 times.
- 4. As long as there is no damage to the cloth adhesive material or sponge and no dirt on the adhesive surface, it can be used repeatedly.
- 1. Slowly pull the object forward until you can place your hand between the object and the wall, put your finger between the material and the wall, and then remove the material attached to the object.
- 2. If the material is strongly stuck to the object or the wall due to long-term mounting, etc., do not try to remove it forcibly. Remove it little by little using a commercially available tape remover or cut the sponge with a cutter, etc., and then use the tape remover to remove it without damaging the wall.
- < Wall materials that cannot be mounted > • Cement mortar, hemlock plaster (sand or powder peels off from the surface), soft wallpaper (soft and easy to peel off when pressed with fingers), cork wallpaper (cork on the surface), paper wallpaper (wallpaper made of Japanese paper or paper cloth), fusuma, shoji, etc.
仕様
- earthquake resistant degree : 7
- Mounting standard (if the centre of gravity is less than or equal to the centre of gravity): Depth 45 cm or more/Height 210 cm or less, width 90 cm or less, Weight 150 kg proven (including contents) Depth 30 to 45 cm or less/Height 180 cm or less, width 90 cm or less, Weight 115 kg proven (including contents)
- Approximate Mounting Number: Total Weight 150 kg/1 Set, 300 kg/2 Sets, 450 kg/3 Sets
- Useful life: 8 years
- Applicable Temperature: -10 to 50 ° C
- material: ABS Plastic, Polyurethane foam, fabric adhesive.
- Size: W 127 x D 85.8 x H 85 mm
- Cloth Adhesive Size: W 94 x H 50 mm (Smaller side of the object), W 120 x H 80 mm (Larger side of the wall)
- Color: Brown
- Quantity : 2 pieces
- Country of origin: Japan
- *For casters, use a commercially available stopper for casters together.
- *When mounting to a personal computer rack, TV bench, etc., make sure that the top board and side plates to be bonded are securely fixed to the product and in contact with the wall surface.
- *Before mounting, check that the wall and the mounting area of the object are not damaged.
- *Improper performance may not be achieved if dirt, dust, moisture or oil remains in the mounting area.
- *Do not use the product in areas exposed to direct sunlight, wind or rain.
- *Do not use alcohol or thinner as it may deform the product.
- *If items are placed on top of this product, sufficient performance may not be achieved.
- *The useful life of this product is 8 years, but it should be replaced or discontinued after periodic confirmation.
- *We are not responsible for damage to objects or walls during installation or removal.
- *This product minimizes the falling of objects caused by shaking. Please note that we are not responsible for any damage caused by earthquakes.
Package size：114×86×170 mm 220 g [About Package size]
| アズワン品番 | 64-0854-73 | |
|---|---|---|
| 型番 | QL-78 | |
| JANコード | 4969887851876 | |
| 標準価格 |
JPY: 2,980
USD: 18.68
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 入り数 | 1set | |
|
|
||
| 在庫数 | - | |