64-0829-72 Noncontact Phase Detection Device TA456MS
Features
- Measured safely over the covering of the wire.
- Compatible with 2 mm2~325 mm2 (IV) wires.
- Check the phase order, absence of phase and ground phase with LED and buzzer.
- With magnet that can be installed in the switchboard.
- Wide measured voltage range from 70 V to 1000 V of three-phase AC.
- The LED light up function makes it clear even in daylight.
- International Safety Standard IEC61010-1
Spec
- Measurement Principle: Electrostatic Induction Method
- Measured Voltage Range: Three-phase AC70 to 1000V (sinusoidal, continuous)
- Conductor Diameter to be Measured: Finishing Outline φ 2.4 to 30 insulation electric wire of mm (Conductor Nominal Area 2 to 325 mm2)
- Measured frequency range: 45 to 66 Hz
- phase detection View
- Positive Phase: Rotating arrow green LED sequentially blinks (clockwise), Positive Phase Character green LED illuminates, buzzer sounds intermittently.
- Reverse phase: The rotating arrow red LED flashes sequentially (counterclockwise), the reverse-phase character red LED lights up, and the buzzer sounds continuously.
- battery Voltage Warning: battery Exhausted: power supply LED flashing
- Operating temperature and humidity range: -10 to + 50 °C, 80% (non-condensing)
- Using battery: AA size Alkaline battery LR6 (15 V) x 4 (Auto Power Off Approx. 10 min.)
- Dimensions: W 60 x D 36 x H 112 mm
- Mass: about 380 g
- Measurement Code: 0.7 m (R: Red S: WHITE T: Blue)
- Accessories: Portable case, AA size Alkaline battery (LR6) x 4, Operation manual
Package size：195×195×90 mm 620 g [About Package size]
| Order No. | 64-0829-72 | |
|---|---|---|
| Model No. | TA456MS | |
| JAN Code | 4528422285400 | |
| Standard price |
JPY: 24,000
USD: 150.44
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|